Advanced Road Sign Display -> Driving with the Speed Warning for Your Volkswagen ID.3 4 Door First Generation (2019-2025)

If there is outdated map material in the Infotainment system  
If there are stickers on vehicles that indicate road signs, such speed limits on commercial vehicles  
The system sometimes uses the camera behind the windshield. You can find further information in the  
information about the sensor system .  
The system will also use navigation data if the vehicle does not have a navigation system. Keep the navigation  
data up to date (→ Navigation). Please contact suitably qualified professionals if you have any questions.  
Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service  
Facility.  
Driving with the Speed Warning  
When is it active?  
The speed warning issues warnings at speeds of above approx. 20 km/h(approx. 12 mph).  
Switching on and off  
Depending on the country, the speed warning may always be switched on when the vehicle's drive system is  
activated.  
If necessary, you can manually switch off the speed warning in the Infotainment system:  
1. Open the Assistance systems menu.  
2. Switch the speed warning on or off in the relevant submenu.  
Activating and Deactivating the Warning Tone  
In the Infotainment system:  
1. Open the Assistance systems menu.  
2. Tap the Speed warning function key.  
3. Activate or deactivate the warning tone at a relevant point (→ Vehicle settings menu).  
When you activate vehicle's drive system, the warning tone is always  
activated.  
Setting the Warning Threshold  
You can manually adjust the warning thresholds for the speed warning.  
In the Infotainment system:  
1. Open the Assistance systems menu.  
2. Tap the Speed warning function key.  
3. To select the level of the warning thresholds, tap in the Warning threshold menu item (→ Vehicle settings  
menu).  
When you activate the vehicle's drive system, the warning thresholds for the speed warning are always reset  
to the default value.  
50  
Activating and Deactivating the Change Tone  
The change tone audibly informs the driver that the speed limits have changed. If necessary, you can manually switch  
off the change tone.  
In the Infotainment system:  
1. Open the Assistance systems menu.  
2. Tap the Speed warning function key.  
3. Activate or deactivate the change tone at a relevant point (→ Vehicle settings menu).  
Hiding Error Messages Via the Multi-Function Steering Wheel  
1. Press the  
button on the multi-function steering wheel.  
Warning Levels of the Speed Warning  
If the system detects that the maximum speed limit is exceeded, it will visually inform you on the instrument cluster  
display with a flashing speed limit recognized by the system and, depending on the settings, a warning tone. There  
are two warning levels for messages.  
Fig. 1 In the instrument cluster display: detection of the  
maximum speed limit being exceeded (general example).  
Speed warning – Level 1  
The system has detected that the maximum speed limit has been exceeded.  
The speed limit detected by the system flashes continuously in the instrument cluster and, depending on the vehicle  
equipment, in the head-up display → fig. 1.  
Speed warning – Level 2  
The system has detected that the maximum speed limit is progressively being exceeded.  
A warning tone sounds. The speed limit detected by the system flashes continuously in the instrument cluster and,  
depending on the vehicle equipment, in the head-up display → fig. 1.  
The second warning level is triggered if the speed limit continues to be increasingly  
exceeded.  
51