Advanced Road Sign Display -> Warning Levels of the Speed Warning for Your Volkswagen ID.3 4 Door First Generation (2019-2025)

Activating and Deactivating the Change Tone  
The change tone audibly informs the driver that the speed limits have changed. If necessary, you can manually switch  
off the change tone.  
In the Infotainment system:  
1. Open the Assistance systems menu.  
2. Tap the Speed warning function key.  
3. Activate or deactivate the change tone at a relevant point (→ Vehicle settings menu).  
Hiding Error Messages Via the Multi-Function Steering Wheel  
1. Press the  
button on the multi-function steering wheel.  
Warning Levels of the Speed Warning  
If the system detects that the maximum speed limit is exceeded, it will visually inform you on the instrument cluster  
display with a flashing speed limit recognized by the system and, depending on the settings, a warning tone. There  
are two warning levels for messages.  
Fig. 1 In the instrument cluster display: detection of the  
maximum speed limit being exceeded (general example).  
Speed warning – Level 1  
The system has detected that the maximum speed limit has been exceeded.  
The speed limit detected by the system flashes continuously in the instrument cluster and, depending on the vehicle  
equipment, in the head-up display → fig. 1.  
Speed warning – Level 2  
The system has detected that the maximum speed limit is progressively being exceeded.  
A warning tone sounds. The speed limit detected by the system flashes continuously in the instrument cluster and,  
depending on the vehicle equipment, in the head-up display → fig. 1.  
The second warning level is triggered if the speed limit continues to be increasingly  
exceeded.  
51  
The second warning level is canceled again if the driver actively reduces the  
speed.  
Troubleshooting  
Advanced Road Sign Display is outside the usage area  
A warning tone sounds. A white indicator light will appear in the instrument cluster display. A message is also  
displayed in the instrument cluster display and in the Vehicle Status menu.  
No data available for this area. The Advanced Road Sign Display is not supported in the country in which you are  
currently driving.  
Advanced Road Sign Display is not available  
A warning tone sounds. A yellow indicator light will appear in combination with the yellow central warning light in  
the instrument cluster display. A message is also displayed in the instrument cluster display and in the Vehicle Status  
menu.  
The windshield is dirty in the area around the camera or weather conditions are interfering with the camera view.  
Clean the windshield (→ Vehicle care).  
The camera's view is limited by attachments or stickers. Keep the area around the camera field of view clear  
(→ Accessories and replacement parts).  
The camera is misaligned or damaged, for example as a result of damage to the windshield. Check if there is  
noticeable damage (→ Accessories and replacement parts).  
The camera was automatically deactivated due to a high ambient temperature or long exposure to direct sunlight.  
Advanced Road Sign Display will be available once the camera is available again. Deactivate the vehicle’s drive  
system and activate it again.  
Malfunction or fault. Deactivate the vehicle’s drive system and activate it again.  
If the problem persists, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Advanced Road Sign Display is partially deactivated  
A white indicator light will appear in the instrument cluster display.  
The default settings of the speed warning are adjusted:  
Check whether the speed warning is deactivated (→ Advanced Road Sign Display).  
Check whether the warning tone is activated (→ Advanced Road Sign Display).  
Check whether the warning threshold set by default is changed (→ Advanced Road Sign Display).  
52