Get Seats -> Center armrest Guide for Volkswagen ID.3 4 Door First Generation (2019-2025)

1. If necessary, adjust the seat backrest so that the head restraint can be removed.

2. Slide the head restraint all the way upward.

3. Pull the head restraint all the way out while pressing the→ fig. 2

button.

Installing the rear head restraint

1. Release the backrest of the rear bench seat and fold slightly forwards.

2. Position the head restraint correctly above the head restraint guides and insert into the guides on the seat

backrest.

3. Push the head restraint downward while pressing the→ fig. 2

button.

4. Fold the rear bench seat backrest toward the rear and lock it securely into place.

5. Adjust the head restraint to the correct position.

Center armrest

Rear center armrest

Fig. 1 In the backrest of the center seat: folding rear

center armrest.

There may be a folding center armrest in the backrest of the middle seat of the rear bench seat.

—To fold forward: pull the center armrest in the direction of the arrow using the loop→ fig. 1.

—To fold back: fold the center armrest upward in the opposite direction of the arrow→ fig. 1 and press it all the way

toward the seat backrest.

Passengers must not sit in the center rear seat when the center armrest is folded down.

WARNING

Incorrect use of the rear center armrest may cause serious injuries.

● If the center armrest is folded down, the center rear bench seat must never be used by either adults or children.

● Never allow an adult or child to ride on the center armrest.

WARNING

Objects that are not secured or are secured incorrectly in the rear center armrest may be thrown around during

sudden braking or driving maneuvers and can cause serious injuries.

● Store objects such as drinks in the storage compartments provided (→ Storage compartments).

130

NOTICE

Incorrect handling of the rear center armrest can cause damage to the seat and the center armrest.

● Remove all objects before folding back the rear center armrest.

Memory function

Memory buttons

Fig. 1 On the outer side of the driver’s seat: memory

buttons.

The driver seat and outside mirror settings can be saved and opened using the memory buttons.

Storing the driver's seat and outside mirror settings for driving forward

1. Set the electronic parking brake.

2. Shift the transmission to neutral.

3. Switch the ignition on.

4. Adjust the driver's seat and outside mirror.

5. Press and hold the

button → fig. 1 for longer than one second.

6. Press the desired memory button→ fig. 1 within approximately 10 seconds.

A chime will confirm that the settings were saved.

Storing the front passenger's outside mirror settings for driving in reverse

1. Set the electronic parking brake.

2. Shift the transmission to neutral.

3. Switch the ignition on.

4. Press the desired memory button→ fig. 1.

5. Select the reverse gear.

6. Adjust the front passenger's outside mirror so that the edge of the curb can be seen clearly, for example.

The selected mirror position will be stored automatically and assigned to the vehicle key that was used to

unlock the vehicle.

Opening the driver seat and outside mirror settings

1. When the vehicle is stationary, the ignition is switched off, and a door is open, press the respective memory

button briefly.

131

Seats -> Center armrest for Your Volkswagen ID.3 4 Door First Generation (2019-2025)

Related Topics

Seats

Popular Owner Manuals

Latest Owner Manuals