The selected position is shown in the digital instrument cluster display and, depending on equipment, on the driving mode selector
when the ignition is switched on.
Selecting a position
On the right of the steering column: driving mode selector.
To change from neutral position to a gear position, carry out the following:
1. Depress the brake pedal.
2. Turn the driving mode selector in the desired direction → Fig. 1.
Switching high brake energy recuperation on and off
Carry out the following actions to activate high brake energy recuperation :
1. Turn the driving mode selector forward once from the
position → Fig. 1.
The driving mode selector always moves back to its original position when released.
2. Turn the driving mode selector in forward direction again to change to the position.
Description of positions
Continuous position for forward driving – the electric drive is in normal mode.
Brake energy recuperation takes place automatically if Eco Assistance is activated (→ Eco assistance).
High brake energy recuperation in overrun (→ Brake energy recuperation).
The electric drive is in the neutral position. No force is transmitted to the wheels and the braking effect of the electric drive is not
available.
Reverse gear is selected. Select only when the vehicle is stationary.
If you want to drive on an uphill gradient in reverse gear, reverse gear may not be available depending on the steepness of the
uphill gradient and the load level. This protects important drive components. Observe the message in the instrument cluster. If
possible, park the vehicle so that you can drive off forwards.
The rear wheels are locked mechanically. Switch on only when the vehicle is stationary .
English 
