If you open the driver door later than approximately 10 minutes after unlocking the vehicle, the driver seat and exterior mirrors
are not automatically adjusted.
Front seat convenience entry function
Variant 1: when the driver door is opened, the driver seat automatically moves to a position which makes it easy to enter the vehicle.
The driver seat moves back to its original position automatically as soon as the driver door is closed and the ignition is switched on.
Variant 2: before you get out of the vehicle, the driver seat automatically moves to the rear position and remains there. After you get in
again and close the driver door, the driver seat moves forward to the position that was stored last.
You can switch the convenient entry function on and off in the Infotainment system
.
Personalisation
You can save and access your individual seat setting in a user account via the personalisation function .
After switching off the ignition and locking the vehicle, the driver seat and exterior mirror settings are stored in the user account.
The driver seat and exterior mirror settings are restored after the vehicle is unlocked and the driver door is opened.
The seat responds to selecting or changing a user account as follows:
—Vehicle stationary or moving no faster than around 5 km/h (around 3 mph): seat is moved. You can cancel the movement at any time
by tapping the appropriate function button in the Infotainment system or by pressing a button on the driver seat.
—Vehicle moving faster than around 5 km/h (around 3 mph): seat is not moved. All other settings are made.
Some settings can be stored in the user accounts of the personalisation function and therefore change automatically when the
user account changes .
WARNING
Incorrect use of the seat functions can cause serious injuries.
● Always assume the correct sitting position before the start of the journey and maintain this position during the journey. This also
applies to all passengers.
● Adjust the memory function only when the vehicle is stationary.
● Keep hands, fingers, feet and other body parts away from seat’s moving parts and adjustment range.
On the outside of the driver seat: button for the massage
function.
When the massage function is switched on, the lumbar support moves and massages the lumbar region.
The curvature of the lumbar support (massage intensity) can be individually adjusted in three levels during operation by repeatedly
pressing the corresponding switch (→ Front seat, electric).
Switching the massage function on and off
1. To switch on, press the
button in the seat control panel. To switch off, press the
button again.
The massage function is switched off automatically after approximately 10 minutes.
English 
