Please carry out each step only in the order specified:
fig. 172
(A)
(B)
(C)
(C)
Low beam,
daytime low beam
headlight or
Front turn signal
indicator
High beam
Parking light
(small bulb holder)
daytime running
light, side marker
light
4.
5.
Turn the bulb holder as far as it goes to the left and pull out
with the light bulb facing rearward.
Pull out the bulb
holder with the light
bulb facing
rearward.
Pull the light bulb straight out of the bulb socket.
If necessary, press the lock on the bulb holder.
6.
7.
Replace the burned out light bulb with a new bulb of the same type.
Insert the bulb holder into the headlight assembly and turn as
far as it goes to the right.
Insert the bulb
holder into the
headlight and slide it
in completely.
Attach the rubber or plastic cover.
If applicable slide the securing clip rearward.
8.
The illustrations show the left headlight assembly from the rear. The right headlight assembly is
the mirror image of the left headlight assembly.
Different models may have different lights, and the location and design of covers, bulb holders,
and bulbs may be in a different location than shown in the illustrations.
You cannot replace the LEDs in LED daytime running lights. Contact your authorized
Volkswagen dealer or an authorized Volkswagen Service Facility for assistance.
347
English 
