Replacing light bulbs in the front bumper
Fig. 173 In front right bumper: Removing the light assembly.
Fig. 174 Replacing a light bulb in the fog light.
ꢀ Please first read and note the introductory information and heed the WARNINGS
Please carry out each step only in the order specified:
1.
2.
Please review and follow the checklist
Pull the cover forward in the direction of the arrow ⇒ꢀfig. 173.
3.
4.
Unscrew the fastening screw (1) with the screwdriver from the vehicle tool kit
Fold the headlight assembly slightly forward and pull out of the mounts ⇒ꢀfig. 174
(small arrows).
5.
6.
Release the connector plug (1) and pull it off.
Rotate the bulb holder (2) counterclockwise as far as it goes and pull it out with the
light bulb to the rear.
7.
8.
9.
Replace the burned out light bulb with a new bulb of the same type.
Insert the bulb holder into the headlight assembly and turn clockwise as far as it goes.
Attach the connector (1) to the bulb holder (2). The connector must latch with an
audible “click”.
English 
