Opening or closing the engine compartment
Fig. 137 A: In the footwell on the driver side: Inside engine hood release lever. B: Above the radiator grille:
Outside engine hood release.
Fig. 138 A: In the engine compartment: Bracket for hood support. B: Hood propped open.
ꢀ Please first read and note the introductory information and heed the WARNINGS
Opening the engine hood
ꢀ
Before you open the hood, make sure that the windshield wiper arms are resting on the windshield
⇒ꢀ
ꢀ
.
Open the driver door and pull the inside hood release lever in the direction of the arrow ⇒ꢀfig. 137
A. The engine hood is released from its latch by a spring ⇒ꢀ
.
ꢀ
Push the outside hood release lever B (arrow) and lift the hood all the way up.
ꢀ Pull the hood support out of its bracket in the direction of the arrow ⇒ꢀfig. 138 A and insert it into
the opening in the hood B (arrow).
Closing the engine hood
ꢀ
ꢀ
ꢀ
Lift the hood slightly ⇒ꢀ
Take out the hood support and clamp it in place in its bracket A.
.
Lower the engine hood by hand until it is about 8 in. (20 cm) above its latch and then let it drop into
place to latch it. Do not push down on it afterwards!
If the hood does not close completely, open it again and close it properly.