3. Operate one-tap wiping ⇒ Operating the windshield wiper lever.
Lifting the windshield wiper arms
1. Move the windshield wiper arms into the service position before lifting ⇒
.
2. Only hold and lift wiper arms in the area where they attach to the wiper blade.
Placing the windshield wiper arms back
1. Before driving, carefully place the wiper arms back against the windshield, holding them only in the area where they attac
to the wiper blade.
2. To return the wiper arms to the home position, operate “one-tap wiping” when the ignition is switched on ⇒ Operating the
windshield wiper lever.
The wiper arms move back to the original position.
NOTICE
Failing to take care when working on the wiper arms can damage the hood, windshield, or wiper arms.
Lift the wiper arms with care, and only in the service position.
Never open the hood when the wiper arms are raised up.
Always place the wiper arms carefully against the windshield before driving.
Cleaning and changing wiper blades
Wiper blades with a graphite coating are installed at the factory. The graphite coating allows the wiper blade to glide easily ove
the window. A damaged graphite coating creates an increased noise level when wiping the window.
Check the condition of the wiper blades regularly.
If wiper blades are rubbing, replace them if they are damaged or clean them if they are dirty
⇒
.
Damaged wiper blades should be replaced immediately. Wiper blades can be obtained from suitably qualified professionals.
Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.
Cleaning the wiper blades
1. Put the wiper arms into the service position ⇒ Putting the windshield wipers in the service position .
2. Lift the wiper arms and only hold in the area where they attach to the wiper blade.
3. Clean the wiper blades carefully with a damp sponge ⇒
.
4. Place the wiper arms carefully on the windshield.
Changing the windshield wiper blades
335
English 