Infotainment system -> Operating the Infotainment system for Your Volkswagen Jetta 4 Door Seventh Generation (2019-2025)

Pages  
Certain menus and functions have multiple pages with different content. The current page is highlighted.  
Tap a selection to switch to a page.  
To switch between pages, swipe left or right on the screen.  
Control Center  
The control center contains additional function keys for functions and notifications. Displayed functions can be configured  
Personalizing the Infotainment system.  
1. Tap and hold the selection and swipe down to open the control center.  
Screen (touchscreen) (without position numbers)  
You can operate the Infotainment system functions via the screen. You will find detailed explanations of the different finger  
movements in the quick guide to the Infotainment system, if available.  
1. To open the quick guide to the Infotainment system, open the app overview and tap  
.
Scroll bars (without position numbers)  
Certain menus and functions contain additional content above and below the content currently displayed on the screen.  
1. Tap the scroll bar and swipe down or up to display additional content.  
Gesture control (without position numbers)  
Gesture control can also be activated, depending on the country. If gesture control is activated, this is shown on the screen.  
1. Open the app overview and tap  
Screen Hand gesture.  
Operating the Infotainment system  
Restoring the Infotainment System to Factory Settings  
1. Open the app overview and tap Settings  
Restore factory settings.  
When restoring factory settings, the vehicle settings are deleted, and personal data may also be deleted. Mobile online  
services can no longer be used in this vehicle. The services can only be used again after reactivation. If there is a primary  
user in the vehicle, they will also be deleted and informed of this via e-mail. Please note additional information on this in the  
chapter on the mobile online services ®.  
Opening the Quick Guide to the Infotainment System (if available)  
Depending on the vehicle equipment, the Infotainment system has a quick guide to operating the Infotainment system. Furthe  
information and tips on operation can be found in the quick guide to the Infotainment system.  
1. Open the app overview and tap  
.
Switching the Infotainment System On or Off  
In the following case, the Infotainment system switches on automatically:  
If the Infotainment system was not previously switched off manually, it will switch on when the ignition is switched on.  
The Infotainment system starts at the volume that was last set, as long as this does not exceed the preset maximum switch-o  
volume.  
In the following cases, the Infotainment system will switch off automatically:  
Vehicles with an ignition lock: if the vehicle key is removed from the ignition lock.  
Vehicles with a starter button: if the driver door is opened when the ignition is not active.  
If you switch on the Infotainment system manually while the ignition is not active, it will switch off after approximately  
30 minutes without user input.  
289  
If the Infotainment system is no longer responding, it automatically restarts. If restarting does not work, tap the sensor area fo  
switching on and off, or press the dial and pressure switch and hold for approx. 15 seconds.  
WARNING  
During a restart of the Infotainment system, functions such as the Rear View Camera system display, acoustic and visual  
warnings of the Park Distance Control and Rear Traffic Alert, the Park Distance Control, the Rear Traffic Alert and other  
warning tones may not be available for a short time. This can cause accidents and serious injuries.  
Always stay attentive and do not rely solely on the systems. The driver is always responsible for control of the  
vehicle.  
Pay attention to the traffic situation and the vehicle environment when entering and leaving a parking space.  
In a hazardous situation, apply the brakes using the brake pedal.  
Wait until the Infotainment system and the other systems are fully started.  
Main Menus in the App Overview  
The following main menus may be included as function keys in the app overview:  
Ambient lighting, Ambient light Interior/reading lights, ambient lighting.  
Owner's Manual: Digital Manual, if available. Driver assistance Driver assistance systems.  
Help: Here, you can find additional information about Infotainment system functions and operation, e.g. the  
or Sound System and sound settings. Climate control Heating and air conditioning system.  
Navigation Navigation. or Radio Radio. Legal. Setup System and sound  
Telephone Mobile phone interface.  
App-Connect App-Connect.  
Vehicle Driver  
information.  
quick guide .  
Media Media.  
settings.  
Configuring the App Overview  
In the app overview, you can configure the layout of the function keys, pages and displays or have them positioned using  
standard layout templates. The app overview cannot be configured in all available Infotainment systems.  
1. Open the app overview.  
2. Tap the function key and hold until the function key is highlighted.  
3. Move the function key to the preferred position and release it.  
Personalization  
Depending on the vehicle equipment, you can personalize function keys and pages Personalizing the Infotainment system  
Personalizing the Infotainment system  
Depending on the vehicle equipment,  
you can personalize the Infotainment  
system to access your favorite and  
frequently used functions quicker.  
The Infotainment system pages contain tiles for accessing additional menus and functions.  
Adjusting tiles  
Adjust the tiles and displayed tile functions in the Infotainment system pages in order to manage the Infotainment system as  
you wish.  
1. Open the app overview.  
290  
2. Tap and hold tiles until an additional window appears.  
3. Tap the desired function in the additional window. Various functions are available depending on the size of the tile.  
Or: to return to the page, tap any free area of the screen.  
There are always at least two pages available. They cannot be removed. Depending on the vehicle equipment, you can  
add two further pages. A maximum of four pages can be displayed.  
For some tiles, more functions are available than can be seen initially in the additional window. To see all the functions,  
swipe up or down in the additional window.  
Adjusting the control center  
Adjust the Infotainment system Control Center for quicker access to your favorite and frequently used functions.  
1. Open the Control Center.  
2. Tap and hold the function until an additional window appears.  
3. Tap the desired function in the additional window and hold until the function is highlighted.  
4. Move the function to the preferred position and release it.  
The active function is automatically removed from the control center and added to the additional window.  
For the control center, more functions are available than can be seen initially in the additional window. Swipe to the left  
or right in the additional window to see all the functions.  
Opening personalization tips (if available)  
Further information and tips on personalization can be found in the digital manual for the Infotainment system.  
1. Open the app overview and tap  
Adjustment.  
System and sound settings  
The selection of available settings varies depending on the vehicle equipment and country.  
Changing settings  
The meanings of the following symbols apply to all system and sound settings.  
Changes will be automatically applied when the menu is closed.  
,
or  
The setting is selected and activated or switched on.  
,
or  
The setting is not selected and  
deactivated or switched off.  
or  
Open the drop-down list. Increase the set value. Reduce the set value. Go back  
Use the slide control to continuously change the set value.  
stepwise. Go forward stepwise.  
System settings  
Depending on the vehicle equipment, the settings for the main menus may also be available in the system settings.  
The system settings may include the following functions, information, and setting options:  
Restore factory settings.  
Screen.  
Copyright.  
Data connection.  
Units.  
Configuration assistant.  
291