Practical equipment for Your Volkswagen Jetta 4 Door Seventh Generation (2019-2025)

Practical equipment  
Storage compartments  
Introduction  
WARNING  
Loose objects can be thrown around the inside of the vehicleduring sudden driving or braking maneuvers. This can cause  
a loss of vehicle control, and can cause accidents and serious or fatal injuries.  
Store objects in only closed storage compartments.  
Always keep the storage compartments closed while driving.  
Do not place mobile devices or similar objects in the rear center armrest storage system while driving.  
Only hang lightweight clothing, up to a maximum of 2.5 kg (approximately 5.5 lbs), from the coat hooks in the  
vehicle.  
Never leave heavy, hard or sharp objects in clothing pockets.  
WARNING  
Incorrect usage of the cup holders can cause injuries. While driving, during a sudden braking maneuver or in the event of  
an accident, objects in the cup holder may be thrown around and hot drinks may be spilled. This can cause serious  
injuries and serious burns.  
Only stow soft, break-resistant, closed vessels in the cup holder.  
Integrated storage systems of the rear center armrest must always be used in the locked end positions.  
Do not place hot beverages in the cup holders.  
Take care that only suitably sized drinks are stored in the cup holder. Drinks must always be steady and secure in  
the cup holder.  
WARNING  
If the glove compartment is open while you are driving, objects may be flung into the vehicle interior. This can cause a loss  
of vehicle control, and can cause accidents and serious or fatal injuries.  
Always keep the glove compartment closed while driving.  
WARNING  
Lighters in the vehicle can become damaged or ignite unintentionally, for example due to high surface temperatures. This  
can cause severe burns and vehicle damage.  
Before closing compartments or storage areas, always make sure that there are no cigarette lighters near the  
sections that will be closing.  
Never place lighters in compartments, in storage areas, or on other surfaces in the vehicle.  
253  
WARNING  
Closed beverage bottles can explode from heat and burst from frost in the vehicle and cause serious injuries.  
Never leave closed beverage bottles in an extremely hot or extremely cold vehicle.  
NOTICE  
Objects stored in the vehicle may be damaged by strong sunlight or the effects of heat or cold or cause damage to the  
vehicle.  
Never leave any objects, groceries, or medications that are sensitive to temperature in the vehicle interior.  
Bear in mind that objects made from transparent materials, e.g. transparent suction cups on door windows, can  
concentrate sunlight.  
NOTICE  
Depending on the vehicle equipment, the rear center armrest may have a storage system. Folding in the rear center  
armrest with the storage system open can damage the cup holder.  
Before folding in the rear center armrest, make sure that objects have been removed and that integrated storage  
systems are closed or folded in.  
Cup Holder in the Rear Center Armrest  
Please read the introductory information and heed the Warnings and Notice   
and Introduction.  
Fig. 126 In the backrest of the center seat: folding rear center armrest (general example).  
254  
Fig. 127 In the rear center armrest: cup holder (general example).  
There is a cup holder in the rear center armrest.  
To fold forward: pull the center armrest in the direction of the arrow with the loop fig. 126.  
To fold back: fold the center armrest upward in the opposite direction to the arrow and press it all the way toward the sea  
backrest fig. 126.  
Passengers must not sit in the center rear seat when the center armrest is folded down.  
Sockets  
Introduction  
Electrical devices can be connected to the sockets in the vehicle.  
The 12 V socket only works when the ignition is switched on.  
WARNING  
Using sockets and connected electrical devices incorrectly can cause fires and serious or fatal injuries.  
If the electrical devices become too warm, turn off the devices immediately and disconnect them.  
Be aware that sockets and devices connected to them may still be used, e.g. by children in the vehicle, when the  
ignition is switched off.  
NOTICE  
Electrical devices that are unsuitable, not permitted, or connected incorrectly may cause damage to the vehicle or  
electronics.  
Never connect electrical devices that provide power, such as solar panels or battery chargers, to the 12 V socket in  
order to charge the 12 V vehicle battery.  
255  
Only use electrical devices that have been tested for compliance with the applicable directives for electromagnetic  
compatibility.  
Do not use any malfunctioning devices.  
To reduce the risk of damage from voltage fluctuations, turn electrical devices off before switching the ignition on or  
off and before starting the engine.  
Refer to the operating instructions for the electrical devices.  
NOTICE  
The vehicle electrical system can be damaged when the maximum load is exceeded.  
Never connect electrical devices that draw more than the specified load of a 12 V socket.  
The 12 V vehicle battery will drain if the ignition and electrical devices are switched on while the engine is switched off.  
Unshielded devices can cause malfunctions in the radio, the Infotainment system and in the vehicle electronics, depending  
on the vehicle equipment.  
Sockets in the vehicle  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Introduction.  
Do not exceed the maximum power of the sockets. The power draw of the external devices is indicated on their identification  
labels.  
12 V socket  
Fig. 128 In the lower part of the center console: 12-volt socket with removable cover (general example).  
The total continuous output of all 12 V sockets in the vehicle is 120 W   
Introduction.  
The maximum power of a 12 V socket in the vehicle with the engine running totals 180 W.  
NOTICE  
256  
Using 12 V sockets for too long at maximum power can cause the fuse to blow.  
Never use 12 V sockets at their maximum power for longer than 10 minutes.  
Only ever use a single 12 V socket at maximum power.  
NOTICE  
When using two or more 12 V sockets at the same time, the total power draw of the connected electrical accessory must  
not exceed 190 W.  
Only ever use a single 12 V socket at maximum power.  
Charging Options for Mobile Devices  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Introduction.  
You can charge mobile devices in the  
vehicle either wirelessly or by using the  
built-in USB-C connectors.  
Charging with USB-C Connectors  
The vehicle may contain the following USB-C ports:  
Symbol for a USB port for data transmission and charging.  
Available Charging Power  
Symbol for a USB port for charging only.  
Voltages up to 20 V are provided via the USB port, which enables up to 45 W charging power.  
Depending on the vehicle equipment, the following charging profiles may be supported by the USB ports:  
Legacy charging (2.5 W).  
BC1.2 (7.5 W).  
USB-C charging (15 W).  
USB power delivery (up to 45 W).  
The actual charging power of the connected device depends on the following aspects:  
Supported charging profiles.  
Device charge level.  
Device temperature.  
Charging cable used.  
For double USB ports, the charging power can be split between both ports.  
Wireless charging function  
257  
Fig. 129 In the center console: breathable liner pad for wireless charging function (general example).  
Liner mat with telephone symbol.  
The wireless charging function depends on the vehicle equipment and is not available in all countries.  
Wireless charging enables wireless energy transfer through electromagnetic induction over a short distance for cell phones  
that are Qi-certified.  
The liner pad with a rear shelf for the wireless charging function is located in the area of the center console and is designed fo  
only one Qi-certified cell phone at a time fig. 129.  
On some vehicles, the liner pad has a telephone symbol indicating the center position fig. 129.  
The charging capacity is 15 W.  
If the vehicle interior is cooled by the air conditioner, cool air is directed into the storage compartment, depending on the  
vehicle equipment.  
Qi Standard  
The Qi standard enables wireless charging of suitable Qi-certified cell phones. To nd out whether a cell phone supports the Q  
standard, see the cell phone operating instructions. An overview of Qi-certified cell phones can be viewed under the following  
external link of the Wireless Power Consortium, Inc:  
Volkswagen AG assumes no liability for the completeness and accuracy of this list. The manufacturer of the cell phone may  
provide additional information regarding compatibility.  
Cell phones that are not Qi-certified may be subject to limitations with regard to wireless charging.  
The Qi symbol  
is displayed in the Infotainment system to indicate the status of wireless charging.  
Wireless Cell Phone Charging  
Requirements  
A suitable cell phone that is no larger than the designated rear shelf and is Qi-certified.  
258  
1. Remove any foreign objects from the storage compartment prior to charging ⇒  
.
2. Remove the protective case of the cell phone and any other foreign objects (if present), then place the cell phone flat  
against the rear shelf with the display facing upward.  
The charging process starts automatically.  
3. Refer to the operating instructions for the cell phone.  
The Infotainment system informs you when the charging process is starting and, if applicable, if there are any foreign objects  
with metal components in the storage compartment.  
Depending on the vehicle equipment, the charging function can be deactivated manually in the Infotainment system.  
Meaning of the Qi symbols  
The white Qi symbol indicates that the cell phone is charging.  
possible.  
The red Qi symbol indicates that wireless charging is no  
Tap the Qi symbol for an explanation of the status and, if necessary, to switch on wireless charging.  
WARNING  
Metal objects on the shelf can become very hot. This may cause burns or fires.  
Do not place metal objects or objects with metal components on the wireless charging shelf.  
Remove any foreign objects immediately.  
NOTICE  
If cards or other objects with magnetic strips or with chips are placed on the rear shelf for wireless charging, the data  
stored on these may be damaged.  
Do not place any ID cards, debit cards or credit cards with magnetic strips or chips on the wireless charging shelf.  
The cell phone can become hot during cordless charging. Keep the vents clean as they improve the air supply around the  
cell phone fig. 129.  
Troubleshooting  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Introduction.  
Cell phone is not Charging  
A message regarding a foreign object in the storage compartment may be displayed in the Infotainment system.  
If the cell phone is in an unfavorable position on the liner mat, this can impair the charging function. This can be caused by  
changes in position – even small shifts that may occur as a result of vibrations, for example.  
The position of the cell phone must be corrected in order to restore correct charging function.  
1. Align the cell phone centrally on the charging surface.  
The charging function can also be impaired by metallic parts – in particular, magnetic parts of a cell phone or its protective  
case.  
1. Rotate the mobile phone approx. 180° with the display still facing upward on the charging surface.  
If cards or other objects with magnetic strips or with chips are placed on the liner pad for wireless charging, the data saved on  
259  
these may be damaged.  
Depending on the model, an error message with the red Qi symbol can be displayed in the Infotainment system. In these  
conditions, it is not possible to use the cordless charging function.  
1. Remove IDs, bank cards and credit cards with magnetic strips or with a chip from the liner pad. The error message is  
automatically closed.  
You can then charge the cell phone again with the wireless charging function.  
If the cell phone on the liner pad becomes too hot, it may switch off for safety reasons. In these conditions, it is not  
possible to use the cordless charging function.  
1. Take the cell phone off the liner pad and allow it to cool in another storage compartment. You can then charge it again wit  
the wireless charging function.  
260