1. Remove any foreign objects from the storage compartment prior to charging ⇒
.
2. Remove the protective case of the cell phone and any other foreign objects (if present), then place the cell phone flat
against the rear shelf with the display facing upward.
The charging process starts automatically.
3. Refer to the operating instructions for the cell phone.
The Infotainment system informs you when the charging process is starting and, if applicable, if there are any foreign objects
with metal components in the storage compartment.
Depending on the vehicle equipment, the charging function can be deactivated manually in the Infotainment system.
Meaning of the Qi symbols
The white Qi symbol indicates that the cell phone is charging.
possible.
The red Qi symbol indicates that wireless charging is no
Tap the Qi symbol for an explanation of the status and, if necessary, to switch on wireless charging.
WARNING
Metal objects on the shelf can become very hot. This may cause burns or fires.
Do not place metal objects or objects with metal components on the wireless charging shelf.
Remove any foreign objects immediately.
NOTICE
If cards or other objects with magnetic strips or with chips are placed on the rear shelf for wireless charging, the data
stored on these may be damaged.
Do not place any ID cards, debit cards or credit cards with magnetic strips or chips on the wireless charging shelf.
The cell phone can become hot during cordless charging. Keep the vents clean as they improve the air supply around the
cell phone fig. 129.
Troubleshooting
Please read the introductory information and heed the Warnings and Notice ⇒
and Introduction.
Cell phone is not Charging
A message regarding a foreign object in the storage compartment may be displayed in the Infotainment system.
If the cell phone is in an unfavorable position on the liner mat, this can impair the charging function. This can be caused by
changes in position – even small shifts that may occur as a result of vibrations, for example.
The position of the cell phone must be corrected in order to restore correct charging function.
1. Align the cell phone centrally on the charging surface.
The charging function can also be impaired by metallic parts – in particular, magnetic parts of a cell phone or its protective
case.
1. Rotate the mobile phone approx. 180° with the display still facing upward on the charging surface.
If cards or other objects with magnetic strips or with chips are placed on the liner pad for wireless charging, the data saved on
259
English 