Lupo 1999 ➤ , Lupo 3L 1999 ➤
Maintenance - Edition 03.2018
♦ For stock vehicles and vehicles in storage perform measures
according to ⇒ ElsaWin - “Maintenance tables” !
Scope of work
Page
– Battery: Check battery terminals by hand for tightness
– Battery: Check
⇒ page 26
⇒ page 28
– Fuse(s) (in ashtray): Fit
– Wheel bolts: tightening to specified torque
⇒ page 28
– Fit all equipment which has been packed inside vehicle (if part
of original equipment): Mats, wiper arms, spoilers, roof aerial,
wheel trims/hub caps, tyre valve extensions
– All switches, electrical consumers, sockets, gauges and other
controls: Check function
– Clock: setting to correct time
– Service interval display: Reset
⇒ page 29
⇒ page 43
⇒ page 30
– Radio: Activate anti-theft coding, store local radio stations to sta‐
tion buttons
– Windscreen wipe/wash system and headlight washer system:
Check function and spray jet settings; replenish with Windscreen
Clear - G 052 164- to maximum
⇒ page 34
– Engine oil level: checking
⇒ page 32
⇒ page 56
– Engine and components in engine compartment: visual check for
leaks and damage (from above)
– Coolant level: Check it is at maximum
– Power assisted steering: Check fluid level
– Brake fluid level: Check level is at maximum
⇒ page 57
⇒ page 71
⇒ page 100
⇒ page 31
– Transportation devices: removing blocking pieces from springs
on front axle
– Vehicle from below (without removing engine cover for noise in‐
sulation): inspect engine and components in engine compart‐
ment, protective bellows, brake system, steering, axles, gearbox,
final drive, hoses and fluid reservoirs for leaks and damage
⇒ page 56
– Vehicle underside (floor pan): Visual check for damage
⇒ page 92
– Edge protection on doors (plastic film): remove.
1
–
⇒ page 94
⇒ page 95
Tyres (including spare) : Check
1
–
Tyre pressures (including spare) : Check, correct if necessary
– Check vehicle interior for cleanliness: Front and rear seats, in‐
terior trim, carpets/mats, windows
– Check vehicle exterior for cleanliness: Paintwork, decorative
parts, windows, wiper blades
– Seat and carpet protective coverings: remove.
– “Your first service” sticker: Apply sticker on door pillar (B-pillar);
the sticker can be found on an instruction attached at front of
vehicle wallet. Destroy the instruction after attaching the sticker!
⇒ page 18
– Service schedule: enter delivery inspection.
– Owner's literature: check that literature is complete and prepare
for delivery to customer.
– Carry out road test
⇒ page 111
1
Vehicles type “6E” are not fitted with spare wheel
16
2. Service work
English 
