Advertisement

Advertisement

Replacing light bulbs -> Replacing headlight bulbs for Your Volkswagen Passat SUV Sixth Generation (2005-2010)

Replacing headlight bulbs  
Fig. 217 In the engine compartment: Covers in the left headlight assembly: A Side marker light, B Low beam  
headlight, C High beam headlight, D Turn signal and parking light, E Daytime running light.  
Fig. 218 In the wheel housing: Removing cover.  
Please first read and note the introductory information and heed the WARNINGS  
It is not necessary to dismantle the headlight assembly to replace a light bulb.  
(A)  
(B)  
(C)  
(D)  
(E)  
⇒ꢀfig. 217  
Side marker  
light  
Low beam  
High beam  
Turn signal  
and parking  
light  
Daytime  
running lights  
1.  
2.  
Please review and follow the checklist  
Open the engine hood ⇒ꢀ  
(A)  
(B)  
(C)  
(D)  
(E)  
⇒ꢀfig. 217  
Side marker  
light  
Low beam  
High beam  
Turn signal  
and parking  
light  
Daytime  
running lights  
Unscrew the  
fastening screw  
⇒ꢀfig. 218  
(arrow) with a  
short  
screwdriver. To  
access the  
screw, turn the  
wheel in  
Same as column  
(A).  
3.  
question inward  
as shown in .  
Remove the  
cover from the  
wheel house  
lining .  
Same as column  
(A).  
4.  
Turn plastic  
cover ⇒ꢀfig. 217  
A (E)  
counterclockwise  
and remove.  
On the back of the headlight assembly, pull off the rubber cover for  
the bulb you are replacing.  
5.  
6.  
Left side of the  
vehicle: Turn  
plastic bulb  
Turn plastic bulb Press plastic Same as  
socket tab on back of column (A).  
counterclockwise bulb socket to  
Same as column  
(A).  
socket  
(about 1/8 turn)  
to release it.  
release it.  
counterclockwise  
(about 1/8 turn)  
to release it.  
Right side of the  
vehicle: Turn  
plastic bulb  
socket clockwise  
(about 1/8 turn)  
instead.  
7.  
8.  
9.  
Pull plastic bulb socket assembly back and out of the headlight assembly.  
Replace the burned out light bulb with a new bulb of the same type.  
Reinsert the bulb socket assembly into the headlight assembly.  
377  
(A)  
(B)  
(C)  
(D)  
(E)  
⇒ꢀfig. 217  
Side marker  
light  
Low beam  
High beam  
Turn signal  
and parking  
light  
Daytime  
running lights  
10.  
Left side of the  
vehicle: Turn  
plastic bulb  
Turn plastic bulb  
socket clockwise  
until it locks into the headlight  
Push bulb  
socket into  
Same as  
column (A).  
Same as column  
(A).  
socket clockwise  
until it locks into  
place in the  
headlight  
place in the  
headlight  
assembly.  
assembly  
until you hear  
it “click” into  
place.  
assembly.  
Right side of the  
vehicle: Turn  
plastic bulb  
socket  
counterclockwise  
instead.  
Place the plastic  
cover A (E) in  
the headlight  
assembly  
housing and turn  
clockwise as far  
as it will go.  
Replace rubber cover on the back of the headlight assembly for the  
bulb you replaced.  
11.  
Place the cover  
⇒ꢀfig. 218 in the  
wheel housing  
liner and use the  
screwdriver in  
the vehicle tool  
kit to tighten the  
fastening screw  
(arrow).  
Same as column  
(A).  
12.  
Please carry out each step only in the order specified:  
The illustrations show the left headlight assembly from the rear. The right headlight assembly is  
the mirror image of the left headlight assembly.