Changing light bulbs
Release the bulb socket assembly from the locking tabs ⇒ꢀfig. 224 A (arrows) and remove
7.
the bulb socket assembly from the taillight assembly.
8.
9.
Replace the burned out light bulb with a new bulb of the same type B.
Put the bulb socket assembly in the taillight assembly. The locking tabs A must latch with
an audible “click.”
Installing the taillight assembly
10.
11.
Carefully put the taillight assembly in the opening in the vehicle body.
Carefully reinsert the taillight assembly into the opening in the luggage compartment lid.
Hold the rear light assembly with one hand in the installation position, and with the other
hand tighten fastening screw ⇒ꢀfig. 223 B (4).
Plug connector plug B (1) into the bulb socket assembly and push latch B (2) in the
direction opposite to the arrow.
12.
13.
14.
15.
Check the taillight assembly for proper installation and secure fit.
Replace the small carpeted taillight access cover; and the battery trim panel, if any (see
step 3 above).
Close the luggage compartment lid
Different models may have different taillights, and the light bulb may be in a different location
than shown in the illustrations.
Replacing license plate lights
ꢀPlease first read and note the introductory information and heed the WARNINGS
Your vehicle is equipped with LED license plate lights. Individual LED lights cannot be replaced. It is
not possible to replace the LED unit without dismantling vehicle components. Please see an
authorized Volkswagen dealer or an authorized Volkswagen Service Facility for assistance.
383
English 