Advertisement

Advertisement

Trailer towing for Your Volkswagen Passat SUV Sixth Generation (2005-2010)

Trailer towing  
Introduction  
In this section you’ll find information about:  
Technical requirements  
Hitching up and connecting a trailer  
Loading the trailer  
Driving with a trailer  
Ball mount  
Retrofitting a trailer hitch  
Maximum permissible trailer weight  
Maximum permissible trailer weight  
Obey country-specific requirements about trailer towing and trailer hitches.  
Volkswagen does not recommend installing a trailer hitch on your vehicle. Your Volkswagen was  
mainly designed for carrying passengers. If you plan to tow a trailer, please remember your vehicle will  
be performing a job for which it was not primarily intended. The additional load will affect durability,  
handling, fuel economy, and performance, and may require the vehicle to be serviced more often.  
Trailer towing not only places more stress on the vehicle, it calls for more concentration from the  
driver. Always follow the operating and driving instructions given, and use common sense.  
Under winter conditions, install winter tires on the vehicle and the trailer.  
Tongue weight  
The maximum permissible trailer tongue weight exerted on the ball mount must not exceed 165 lbs  
(75 kg).  
More information:  
Power locking and closing system  
Preparation for the anti-theft alarm system  
Lights  
Braking, stopping, and parking  
Saving fuel and helping the environment  
Driver assistance systems  
Tires and wheels  
Parts, accessories, repairs and modifications  
WARNING  
Riding in a trailer is dangerous and may be illegal.  
WARNING  
Improper use of the trailer hitch can cause accidents and injuries. An improperly installed,  
incorrect, or damaged trailer hitch can cause the trailer to separate from the towing vehicle  
and cause serious personal injuries.  
Only use an undamaged, properly mounted trailer hitch.  
Never repair or modify the trailer hitch.  
To reduce the risk of injury in rear-end collisions, and the risk to pedestrians and cyclists  
when the vehicle is parked, always remove the ball mount when you are not towing a trailer.  
Never install a “weight distributing” or “load equalizing” trailer hitch on your vehicle. The  
vehicle was not designed for these kinds of trailer hitches. The trailer hitch attachment can  
fail, causing the trailer to tear loose from the vehicle.  
WARNING  
Improper trailer towing can cause loss of vehicle control and serious personal injury.  
Driving with a trailer and carrying heavy or large things can change the way the vehicle  
handles, increase the distance it needs to stop safely, and cause accidents.  
Always secure the load properly with suitable and undamaged straps so that the load will  
not shift.  
Always adapt your speed and driving to the heavier load and the weight distribution in the  
vehicle. Take road, weather, traffic, and visibility conditions into account as well.  
Reduce your speed even more than you otherwise would when going downhill and under  
unfavorable load, weather, or wind conditions.  
Trailers with a high center of gravity tip more easily than trailers with a low center of  
gravity.  
Always avoid sudden maneuvers and hard braking.  
Be especially careful when passing other vehicles.  
Reduce speed immediately if the trailer shows the slightest sign of swaying.  
Never try to stop the swaying by accelerating.  
Always obey speed limits. In some areas, the speed limits for vehicles towing trailers are  
lower than for vehicles without trailers. Never drive faster than 50 mph (80 km/h; under  
exceptional circumstances 60 mph - 100 km/h) when towing a trailer. This applies even if the  
local speed limit is higher.  
If you are driving a new vehicle or a vehicle with a new or rebuilt engine, do not tow a trailer  
during the break-in period, about 600 miles (1000 km), Parts, accessories, repairs and modifications.  
If you tow a trailer, your vehicle may need maintenance more often because of the extra load it  
has to move.  
When you are not towing, remove the trailer hitch ball. This helps keep the trailer hitch from  
causing damage to your vehicle and to others if your vehicle is hit from behind.  
Some models need a trailer hitch to tow or tow-start other vehicles. You may want to always  
carry the ball mount in the vehicle after it has been removed. Be sure to stow it securely.  
Technical requirements  
Please first read and note the introductory information and heed the WARNINGS  
Use only a weight-carrying trailer hitch designed and approved for the gross weight of the trailer you  
want to tow. The trailer hitch must be suitable for your vehicle and trailer and must be securely bolted  
to the appropriate place on the vehicle chassis. Use only a trailer hitch with a removable ball mount.  
Always check with the trailer hitch manufacturer to make sure that you are using the correct trailer  
hitch and carefully follow the hitch manufacturer's instructions. Never install a “weight-distributing” or  
“load-equalizing” trailer hitch on your vehicle. The vehicle is not designed for this kind of trailer hitch  
⇒ꢀ  
.
Do not use a bumper-mounted trailer hitch  
Never install a trailer hitch on the bumper or on the bumper attachments. The trailer hitch must not  
interfere with the impact-absorbing bumper system. Do not make any changes to the vehicle exhaust  
and brake systems. From time to time, check that all trailer hitch mounting bolts are securely fastened.  
When you are not towing, remove the trailer hitch. This helps keep the trailer hitch from causing  
damage if your vehicle is hit from behind.  
Engine cooling system  
Towing a trailer makes the engine and its cooling system work harder. It is important that the engine  
cooling system is up to the job. Make sure that the cooling system has enough coolant.  
Trailer brakes  
If your trailer has its own brakes, make sure it meets all regulations. The trailer brake system must  
never be directly connected to the vehicle's brake system.  
Safety chains  
Always use safety chains between your vehicle and the trailer, Hitching up and connecting a trailer.  
Trailer taillights  
Trailer lights must meet all regulations, Hitching up and connecting a trailer.  
Never connect the trailer lights directly to the electrical system of your vehicle.  
Outside mirrors  
If you cannot see the traffic behind you using the regular outside mirrors, then you must install  
extended mirrors. Extended mirrors may also be required by law in some countries / states /  
provinces. Always adjust the outside mirrors before driving. It's vital that you always have a clear view  
to the rear of the vehicle.  
Maximum power consumption for the trailer  
Do not exceed the power ratings listed in the chart below.  
Electrical load  
Brake lights total  
Maximum power  
108 watts  
Turn signals per side  
Side marker lights total  
Taillights total  
54 watts  
100 watts  
54 watts  
WARNING  
An improperly installed or incorrect trailer hitch can cause a trailer to separate from the  
tow vehicle and cause serious personal injuries.  
If you don't have to tow a trailer any more, remove the entire trailer hitch. Always seal all  
bolt holes to prevent water and deadly exhaust fumes from getting into the vehicle.  
NOTICE  
If the trailer lights are not connected properly, the vehicle's electronics may be damaged.  
If the trailer uses too much electricity, the vehicle's electronics may be damaged.  
Never connect the electrical system for the trailer directly to the electrical connections for  
the rear lights or to any other unsuitable power sources. Use only a suitable connector to  
provide power to the trailer.  
If you tow a trailer frequently, Volkswagen recommends having the vehicle serviced between the  
regular maintenance and inspection intervals because of the extra load it has to pull.  
Hitching up and connecting a trailer  
Please first read and note the introductory information and heed the WARNINGS  
Safety chains  
Always make sure that the safety chains are properly attached to the towing vehicle. Leave enough  
slack in the chains so that you can go around corners without stretching the chains. The safety chains  
must not drag on the ground, however.  
Trailer taillights  
Make sure that the trailer lights work properly and meet legal requirements. Do not exceed the  
maximum power consumption for the trailer, Maximum power consumption for the trailer.  
WARNING  
Improper connections to the vehicle electrical system can cause malfunctions that affect the  
entire vehicle electrical system, which can lead to accidents and serious personal injury.  
Have any work on the electrical system done by an authorized Volkswagen dealer or  
authorized Volkswagen Service Facility.  
Never connect the electrical system for the trailer directly to the electrical connections for  
the rear lights or to any other unsuitable power sources. Use only a suitable connector to  
provide power to the trailer.  
NOTICE  
Never attach a trailer to the vehicle or leave it attached to the vehicle when the trailer is  
supported by a trailer jack or blocks. Various things (such as a change in trailer or vehicle load  
or a flat tire) can lower or raise the vehicle. This subjects the trailer hitch and the trailer to  
strong forces that can damage the vehicle or the trailer.  
If the engine is switched off and accessories in the trailer are on and use electricity from the  
vehicle, the vehicle battery will be drained as long as the electrical systems of the vehicle and the  
trailer are connected.  
Loading the trailer  
Please first read and note the introductory information and heed the WARNINGS  
Maximum permissible trailer weight and tongue weight  
Maximum permissible trailer weight is the load that the vehicle can tow ⇒ꢀ . The tongue load or  
tongue weight is the load pressing down on the trailer hitch ball mount, Ball mount.  
The maximum permissible trailer weight and tongue weight for your vehicle are listed on, Maximum  
permissible trailer weight, Maximum permissible trailer weight in this Manual.  
The trailer load and tongue weight on the type identification plate for the trailer hitch are only test  
values. The vehicle-specific figures are often lower than these values. In some countries, but generally  
not in the United States, the vehicle-specific figures are listed in the official vehicle documents.  
Specifications in official vehicle documents always take precedence.  
To help ensure optimum handling and driving safety, Volkswagen recommends always using the  
maximum permissible tongue weight. If the tongue weight is too low, the vehicle and trailer will not  
handle as well.  
Tongue weight increases the load on the rear axle and, in turn, reduces the remaining load your  
vehicle can carry, Determining the correct load limit.  
Combined towing weight  
Combined towing weight is the weight of the loaded towing vehicle plus the weight of the loaded  
trailer.  
This vehicle has not been designed to tow a Class II trailer and must never be retrofitted to tow a  
Class II trailer. Always make sure that your vehicle has been designed to tow the trailer you want to  
use and that it is legal to tow the trailer where you will be driving.  
Loading the trailer  
The weight distribution in the vehicle and trailer must be balanced. Use the maximum permissible  
tongue weight and make sure that the load in the trailer is evenly distributed and that it is not front-  
heavy or tail-heavy:  
Distribute the load in the trailer so that heavy objects are directly above the axle or as close as  
possible to the axle.  
Secure loads properly on the trailer.  
Tire pressure  
Always follow the trailer manufacturer's tire pressure recommendations for the trailer tires.  
When towing, inflate the towing vehicle's tires to the maximum permissible pressure listed on the tire  
pressure label, Tires and wheels.  
WARNING  
Exceeding the gross weight ratings for axle, tongue, vehicle, trailer or combined weight can  
cause accidents and serious personal injury.  
Never exceed the specified values.  
Never let the actual weights at the front and rear axles exceed the Gross Axle Weight  
Rating. Never let the combined front and rear weights exceed the Gross Vehicle Weight  
Rating.  
WARNING  
Trailer loads that are not properly secured can shift when the vehicle is moving or braking  
and suddenly change the way the vehicle handles, causing accidents and severe injuries.  
Always load the trailer properly.  
Always secure the load properly with suitable, undamaged straps that can be tightened so  
that the load cannot shift.  
Driving with a trailer  
Please first read and note the introductory information and heed the WARNINGS  
Headlight settings  
Towing a trailer can raise the front end of the vehicle enough for the low beams to blind other road  
users. If your vehicle does not have headlight range adjustment, have the headlights adjusted by an  
authorized Volkswagen dealer or authorized Volkswagen Service Facility. Vehicles with Xenon  
headlights self-adjust to vehicle load and do not need manual adjustment.  
Special towing considerations  
If the trailer has an overrun brake, apply the brakes gently at first and then firmly. This helps to  
prevent sudden brake shock and helps prevent trailer wheels from locking up.  
Due to the combined towing weight including the higher gross vehicle weight, the stopping distance  
is longer.  
Before driving downhill, especially on hills that are long or steep, shift into a lower gear (manual or  
automatic transmission) so that the engine helps to brake the vehicle. Otherwise, the brake system  
could overheat and might fail.  
The vehicle's center of gravity and, in turn, the vehicle's handling, will change because of the trailer  
load and the increased combined towing weight of the vehicle and trailer.  
Weight distribution is especially bad if the towing vehicle is empty and the trailer is loaded. If you  
absolutely must drive with this combination, drive with extra care and at a reduced speed.  
Starting off with a trailer on hills  
Depending on how steep the hill is and the combined towing weight, a parked vehicle with trailer can  
roll backwards when you first start moving.  
When starting off with a trailer on a hill:  
Depress and hold the brake pedal and depress and hold the clutch (manual transmission).  
Shift into first gear or Drive D, Shifting.  
Unlock the parking brake and gently release it while holding the unlock button. At the same time,  
release the brake pedal and gradually depress the accelerator and, for manual transmission, let out  
the clutch until you can feel the car moving forward. If applicable, follow the instructions for the Hill  
Hold feature, Hill Hold.  
Do not release the parking brake lever until the engine starts to move the vehicle forward. If your  
vehicle has an automatic transmission, you can also depress and hold the brake pedal for added  
braking and then let up on the brake pedal when you feel that the vehicle “wants” to move forward.  
Drive ahead slowly.  
WARNING  
Improper trailer towing can cause loss of vehicle control and serious personal injury.  
Driving with a trailer and carrying heavy or bulky items changes the way the vehicle  
handles and increases the distance it needs to stop safely.  
Always watch what is happening up ahead and around you. Brake earlier than you would  
if you were not towing a trailer.  
Always adapt your speed and driving to the heavier load and the weight distribution in the  
vehicle. Take road, weather, traffic, and visibility conditions into account as well.  
Reduce your speed even more than you otherwise would when going downhill and under  
unfavorable load, weather, or wind conditions.  
Drive especially carefully and accelerate gently. Always avoid sudden maneuvers and  
hard braking.  
Be especially careful when passing other vehicles.  
Reduce speed immediately if the trailer shows even the slightest sign of swaying.  
Never try to stop the swaying by accelerating.  
Always obey speed limits. In some areas speed limits for vehicles towing trailers are lower  
than for vehicles without trailers.  
Ball mount  
Fig. 117 Dimensions of the ball mount support.  
Please first read and note the introductory information and heed the WARNINGS  
Your vehicle is not equipped with a trailer hitch or preparations for the installation of a trailer hitch. If  
you must tow a trailer, you must have the necessary electrical wiring and socket together with a  
suitable trailer hitch installed. Because towing a trailer places a great deal of stress on the vehicle, the  
attachment of a trailer to the vehicle and the dimensions of the receiver and ball mount are very  
important so that the extra forces the vehicle has to withstand can be properly handled.  
The receiver used requires both a ball mount and a ball that meet special requirements regarding  
geometry and size. This applies to both the height of the ball above the surface where it attaches  
⇒ꢀfig. 117 (A), and the pin-to-ball distance (B).  
These dimensions are important because they help determine the way that the forces that arise during  
towing are applied to the receiver and its attachments to the vehicle. If you buy a ball mount and ball,  
make sure that they meet the following specifications.  
Ball mount dimensions  
The drop height (A) from the center of the ball to the center of the hole for the securing pin on the  
ball mount must be at least 1 inch (25.4 mm) and at most 27/8 inches (73 mm).  
The pin-to-ball distance (B) from the center of the ball to the center of the hole for the securing pin  
on the ball mount must be no more than 7 inches (178 mm).  
The ball diameter must be no more than 17/8 inches (47.6 mm).  
A ball mount and ball combination that does not meet these specifications can damage your vehicle  
and may even fail in use ⇒ꢀ  
Never install a “weight distributing” or “load equalizing” trailer hitch on your vehicle. The vehicle is not  
.
designed for this kind of trailer hitch ⇒ꢀ  
.
WARNING  
An improperly installed or unsuitable trailer hitch can cause the trailer to separate from the  
towing vehicle and result in a major accident with serious personal injuries.  
Have any trailer hitch retrofit or other work on a trailer hitch done by a qualified workshop.  
CAUTION  
The ball mount sticks out behind the rear bumper and can cause injury to pedestrians and  
cyclists.  
To reduce the risk of injury in rear-end collisions, and the risk to pedestrians and cyclists  
when the vehicle is parked, always remove the ball carrier when you are not towing a trailer.  
NOTICE  
Never use a ball larger than 17/8 inches (47.6 mm) on your vehicle. The vehicle was not  
designed to tow heavier trailers with a receiver larger than the specified ball. The increased  
loads can damage the attachment points for the trailer hitch.  
Never use an adapter to increase the size of the trailer hitch receiver from 17/8 inches  
(47.6 mm) to 2 inches (50.8 mm) or more than to tow a trailer that is heavier than the maximum  
permissible trailer weight that your vehicle can tow.  
You can use an adapter if required for the proper installation of a bicycle rack or other  
similar carrier as long as the maximum weight limits are observed. When using bicycle racks  
or similar carriers, make sure that the rear lights are not blocked.  
Only use trailer hitches that are approved by the hitch manufacturer for your vehicle and  
model.  
Retrofitting a trailer hitch  
Fig. 118 Dimensions and attachment points for retrofitting a trailer hitch.  
Please first read and note the introductory information and heed the WARNINGS  
Volkswagen recommends having the trailer hitch retrofit performed by a qualified workshop because  
cooling system modifications or the installation of heat shields may be necessary. Volkswagen  
recommends that you see an authorized Volkswagen dealer or an authorized Volkswagen Service  
Facility before having a hitch installed on your vehicle.  
When retrofitting a trailer hitch, the specified distance dimensions must be strictly adhered to. Under  
no circumstances may the distance from the center of the ball to the surface of the road ⇒ꢀfig. 118 (D)  
be less than the specified minimum. This minimum height must be present even when the vehicle is  
fully loaded and subject to the maximum tongue weight.  
Distance dimensions :  
(A)  
(B)  
(C)  
(D)  
(E)  
Attachment points  
48 inches (1218 mm)  
at least 2.8 inches (70 mm)  
14.2 inches (360 mm)  
13.1 inches (333.4 mm)  
(F)  
27.8 inches (705.3 mm)  
41.3 inches (1048.2 mm)  
(G)  
WARNING  
Improper or incorrect connections to the vehicle electrical system can cause malfunctions  
that affect the entire vehicle electrical system and cause accidents and serious personal  
injury.  
Never connect the electrical system of the trailer directly to the electrical connections of  
the rear lights or other unsuitable power sources. Use only a suitable connector to provide  
power to the trailer.  
Have any trailer hitch retrofit or other work on a trailer hitch done by a qualified workshop.  
WARNING  
An improperly installed or unsuitable trailer hitch can cause the trailer to separate from the  
towing vehicle and result in a major accident with serious personal injuries.  
Maximum permissible trailer weight  
Please first read and note the introductory information and heed the WARNINGS  
Engine  
Engine ID  
code  
Transmission  
Trailer  
Trailer hitch  
tongue weight  
All gasoline and diesel  
engines  
all  
all  
1000 lbs (450 kg) 165 lbs (75 kg)  
The Gross Vehicle Weight Rating and the Gross Axle Weight Rating must not be exceeded, even with  
a trailer. These ratings are listed on the safety compliance label on the left front door jamb ⇒ꢀpage 36.  
When a trailer is towed, the weight of the ball mount and the tongue weight of the trailer are added to  
the vehicle weight, Determining the correct load limit.  
The trailer weight ratings given above are valid only up to altitudes of 3000 ft (1000 m) above sea  
level. The maximum permissible combined towing weight must be reduced by about 10% for every  
3000 ft (1000 m), or portion thereof, of additional altitude.  
WARNING  
Exceeding the gross trailer weight rating and tongue weight can cause accidents and serious  
personal injury.  
Never let the actual weights at the front and rear axles exceed the Gross Axle Weight  
Rating (GAWR). Never let the combined front and rear weights exceed the Gross Vehicle  
Weight Rating (GVWR).  
NOTICE  
Exceeding the gross weight ratings can cause extensive vehicle damage that is not covered by  
any Volkswagen Limited Warranty.