¤ Please first read and note the introductory information and
heed the WARNINGS
Instrument explanations ⇒ꢀfig. 9:
(1) Speedometer.
(2) Tachometer (thousands of revolutions per minute when the en-
gine is running).
The red zone at the end of the scale indicates maximum permis-
sible engine rpm (revolutions per minute) for all gears after the
break-in period. Before reaching the red zone, select the next
higher gear or selector level position D, or ease your foot off the
accelerator ⇒ꢀ .
(3) Displays ⇒ꢀ Displays
(4) Reset button for the trip odometer display (trip).
– Push the E3%4 button for about 1 second to reset to zero.
(5) Fuel gauge ⇒ꢀ Refueling.
(6) Button for setting the instrument cluster clock, the Radio or
Radio & Navigation system clock, and the analog clock1.
– With the ignition on, push the -® button to highlight the
hour or the minutes in the clock display.
– To advance the clock, push the E3%4 button (4). Press and
hold the button to fast forward.
– Push the -® button again to finish setting the clock. The
analog clock may take a few seconds to show the updated
time.
(7) Engine coolant temperature display ~ ⇒ꢀEngine coolant.
NOTICE
To help prevent engine damage, always avoid high engine
speeds, full throttle acceleration, and heavy engine loads when
the engine is cold.
To help prevent engine damage, the tachometer needle should
only enter the red zone (warning zone) briefly.
1
On appropriately equipped vehicles, the clocks can also be set via the Settings menu in the instrument
cluster display ⇒ꢀpage 32, Settings menu, ⇒ꢀpage Error! Bookmark not defined., Settings menu.
English 
