Calibrating the compass
In order to calibrate the compass, you need a valid compass zone for
the location and enough room to drive in a circle.
Switch on the ignition.
Select the Settings menu followed by the Compass and Calibrate
menu items.
Confirm the Please drive a full circle to calibrate message by
pressing the /+ button on the multi-function steering wheel, and then
drive in a complete circle at about 6 mph (10 km/h).
During calibration, CAL is shown in the instrument cluster display.
The calibration is complete when the compass direction is displayed.
Service reminder display
¤ Please first read and note the introductory information and
heed the WARNINGS
The service appointment reminder is shown in the instrument cluster
display.
For information on maintenance intervals, please see the
⇒ꢀBooklet Warranty and Maintenance.
For vehicles with time- or distance driven-dependent service, only
fixed service intervals are displayed.
Service reminder
If service is due in the near future, a service reminder is displayed
when the ignition is switched on.
The messages Oil change and Inspection are shown in the instru-
ment cluster display with the number of miles (km) and days remain-
ing until service is due.
Service event
When Service is due, the message Oil change now! or Inspection
now! is shown in the instrument cluster display.
Viewing service message
The current service message can be accessed when the ignition is
switched on, the engine is switched off, and the vehicle is stopped: