The roll-back function can reduce the risk of injuries when closing the sun blind → . The sun blind will open again automatically if it
is unable to close because it is stiff or obstructed.
1. Check to see why the sun blind has not closed.
2. Try to close the sun blind again.
The sun blind will open again immediately if it is still unable to close because it is stiff or obstructed. After opening, the sun blind
can be closed again within a short period of time without the roll-back function.
3. If the sun blind still cannot be closed, close it without the roll-back function.
Closing the sun blind without the roll-back function
1. Try to close the sun blind again.
2. If the sun blind still cannot be closed, swipe forward over the function button within 5 seconds and hold → Fig. 1 until the sun
blind is fully closed.
The sun blind will now close without the roll-back function.
3. Please go to a suitably qualified workshop if the sun blind still cannot be closed. Volkswagen recommends using an authorised
Volkswagen repairer.
If you let go of the function button during the closing procedure, the sun blind will open automatically.
Touch panel reacts differently than expected
Moisture, dirt and grease can impede the functioning of the touch panel.
1. Always keep the touch panel clean and dry.
WARNING
Closing the sun blind without the roll-back function can cause serious injuries.
● Always take care when closing the sun blind.
● Ensure that nobody obstructs the path of the sun blind, especially if the roll-back function is not active when it is closed.
In the rear window: sun blind (illustration).
The sun blinds for the rear side windows are fitted in the door trim at each window.
1. Use the protruding handle to fully pull up the sun blind in the direction of the arrow → Fig. 1.
2. Hook both rings on the bar into the corresponding brackets → Fig. 1 1 .
3. Ensure that the extended sun blind is secured firmly in the bracket.
To retract the sun blind, unhook it at the top and guide it down by hand →
.
English 
