2. Put the gearbox into neutral.
3. Switch on the ignition.
4. Press the desired memory button → Fig. 1.
5. Select reverse gear.
6. Adjust the exterior mirror on the front passenger side so that you have a good view of the kerb area, for example.
The settings for the mirror position will be saved automatically and assigned to the vehicle key that was used to unlock the
vehicle.
Opening the driver seat and exterior mirror settings
1. When the vehicle is stationary, the ignition is switched off and one vehicle door is open, briefly press the corresponding memory
button.
After around 10 minutes, the stored positions can no longer be adjusted automatically. The adjustment process is cancelled if
one of the memory buttons is pressed again.
with the ignition switched on or the vehicle door closed, press and hold the corresponding memory button until the stored
positions have been reached.
The front passenger exterior mirror will leave the position saved for reversing automatically if the vehicle drives forwards at a speed of
at least around 15 km/h (around 10 mph) or if you turn the rotary knob for the exterior mirror out of the position and into another
position.
If you open the driver door later than approximately 10 minutes after unlocking the vehicle, the driver seat and exterior mirrors
are not automatically adjusted.
Front seat convenience entry function
Variant 1: when the driver door is opened, the driver seat automatically moves to a position which makes it easy to enter the vehicle.
The driver seat moves back to its original position automatically as soon as the driver door is closed and the ignition is switched on.
Variant 2: before you get out of the vehicle, the driver seat automatically moves to the rear position and remains there. After you get in
again and close the driver door, the driver seat moves forward to the position that was stored last.
You can switch the convenient entry function on and off in the Infotainment system
.
Personalisation
You can save and access your individual seat setting in a user account via the personalisation function .
After switching off the ignition and locking the vehicle, the driver seat and exterior mirror settings are stored in the user account.
The driver seat and exterior mirror settings are restored after the vehicle is unlocked and the driver door is opened.
The seat responds to selecting or changing a user account as follows:
—Vehicle stationary or moving no faster than around 5 km/h (around 3 mph): seat is moved. You can cancel the movement at any time
by tapping the appropriate function button in the Infotainment system or by pressing a button on the driver seat.
—Vehicle moving faster than around 5 km/h (around 3 mph): seat is not moved. All other settings are made.
Some settings can be stored in the user accounts of the personalisation function and therefore change automatically when the
user account changes .
WARNING
Incorrect use of the seat functions can cause serious injuries.
● Always assume the correct sitting position before the start of the journey and maintain this position during the journey. This also
applies to all passengers.
● Adjust the memory function only when the vehicle is stationary.
● Keep hands, fingers, feet and other body parts away from seat’s moving parts and adjustment range.
English 
