12/29/2015
Bedienungsanleitung < Service & Zubehör < Volkswagen Deutschland
If a message or vehicle pictogram is displayed, press button → Fig. 15 ① ꢀ on the windscreen wiper level or the
multifunction steering wheel → Fig. 16ꢀ. You may need to press the button several times.
button on the
Operation using the windscreen wiper lever: to display the selection menu → Selection menuꢀ or to return to the selection menu from
another menu or information display, press and hold the rocker switch → Fig. 15 ② ꢀ until the selection menu is displayed. To browse
through the selection menu, press the rocker switch up or down.
Operation using the multifunction steering wheel: to display and browse through the selection menu, press
or
→ Fig. 16ꢀ.
To open the menu or information display shown in the selection menu, press → Fig. 15 ① ꢀ on the windscreen wiper lever, press the
button on the multifunction steering wheel → Fig. 16ꢀ, or wait until the menu or information display opens automatically after a few
seconds.
Adjusting settings in menus
In the displayed menu, press the rocker switch → Fig. 15 ② ꢀ on the windscreen wiper lever up or down, or press the arrow buttons
or
on the multifunction steering wheel → Fig. 16ꢀ until the required menu option is selected. A frame appears around the selected
option.
Press button → Fig. 15 ① ꢀ on the windscreen wiper lever or press the
button on the multifunction steering wheel → Fig. 16ꢀ to
make the required change. A tick indicates that the particular system or function is active.
Returning to the selection menu
Using the menu: in the menu, select the Back menu option to leave the menu.
Using the multifunction steering wheel: press the
or
button → Fig. 16ꢀ.
If warning messages about malfunctions are displayed when the ignition is switched on, it may not be possible to adjust some settings
as described, or the information display may appear differently. If this is the case, take the vehicle to a qualified workshop to have the
malfunction rectified.
Selection menu
First read and observe the introductory information and safety warnings →
ꢀ
Introduction
Menu
Function
See
Information and settings for the multifunction display (MFD).
→ Driving data ꢀ ,
→ Menu and system
settings (SETUP) ꢀ
Driving data
Display of current warning or information messages and other system components
depending on the equipment level.
→ Assist systems menuꢀ ,
→ Menu and system
settings (SETUP) ꢀ
Assist systems
Information and settings for the driver assist systems.
Information displays from active navigation system:
Turning arrows and proximity bars are displayed if you use active route guidance. The
design is similar to the symbols used in the infotainment system.
⇒ BookletNavigation
system,
Navigation
Audio
The direction of travel (compass function) and the name of the road being used are
displayed if the route guidance option is not active.
Station display in radio mode.
Display of station list in radio mode.
Track display in media mode.
⇒ BookletRadio, /
⇒ BookletNavigation
system,
24/32
English 