ACC adopts the last set speed and last set distance. The instrument cluster display shows the set speed and the indicator lamp
corresponding to the driving situation lights up.
Switching off
1. Press and hold the
button.
The set speed is deleted.
Changing to the speed limiter
1. Press the
button.
2. Select the speed limiter on the instrument cluster display.
ACC is switched off.
Depending on equipment, the
button is either on the multifunction steering wheel or on the turn signal lever.
Setting the distance
On the instrument cluster display: set distance for control
(illustration).
You can set the distance in five steps from very small to very large:
1. Press the
button.
2. Press the or button.
press the
button repeatedly until the required distance is selected.
The instrument cluster display shows the chosen setting → Fig. 1 1 . Please observe any country-specific regulations for the
minimum distance.
Control always starts at the level that the respective user had set at the end of the last trip.
If the ACC has not taken control, the set distance and vehicle are not highlighted on the instrument cluster display.
Adjusting the speed
You can adjust the stored speed within the defined speed range by means of the buttons on the multifunction steering wheel:
+ 1 km/h (1 mph):
Press the
button, only when ACC is active.
English 