Get Adaptive Cruise Control (ACC) -> Switching the ACC on and off Guide for Volkswagen Polo SUV Seventh Generation (2021-2025)

Left-hand side of the multifunction steering wheel.

Switching on

1. Press the

button.

ACC is not yet performing a control intervention.

Starting control

1. While driving forwards, press the

button.

ACC stores the current speed and maintains the set distance. If the current speed is outside the defined speed range, ACC will set

the minimum speed when driving more slowly than the limit or the maximum speed when driving faster than the limit.

Relevant brake support systems are also activated (→ Brake support systems).

The following indicator lamps light up, depending on the driving situation:

ACC has taken control; no vehicle detected ahead.

ACC has taken control; vehicle detected ahead.

ACC is not performing a control intervention; no vehicle detected ahead.

ACC is not performing a control intervention; vehicle detected ahead.

Cancelling system control

1. Briefly press the

button.

depress the brake pedal while driving.

The indicator lamp corresponding to the driving situation lights up grey, the speed and distance remain stored.

If a relevant brake support system is deactivated, control is automatically interrupted (→ Brake support systems).

Resuming control

1. Press the

button.

ACC adopts the last set speed and last set distance. The instrument cluster display shows the set speed and the indicator lamp

corresponding to the driving situation lights up.

Switching off

1. Press and hold the

button.

The set speed is deleted.

Changing to the speed limiter

1. Press the

button.

2. Select the speed limiter on the instrument cluster display.

ACC is switched off.

Depending on equipment, the

button is either on the multifunction steering wheel or on the turn signal lever.

Setting the distance

On the instrument cluster display: set distance for control

(illustration).

You can set the distance in five steps from very small to very large:

1. Press the

button.

2. Press the or button.

press the

button repeatedly until the required distance is selected.

The instrument cluster display shows the chosen setting → Fig. 1 1 . Please observe any country-specific regulations for the

minimum distance.

Control always starts at the level that the respective user had set at the end of the last trip.

If the ACC has not taken control, the set distance and vehicle are not highlighted on the instrument cluster display.

Adjusting the speed

You can adjust the stored speed within the defined speed range by means of the buttons on the multifunction steering wheel:

+ 1 km/h (1 mph):

Press the

button, only when ACC is active.

Adaptive Cruise Control (ACC) -> Switching the ACC on and off for Your Volkswagen Polo SUV Seventh Generation (2021-2025)

Related Topics

Adaptive Cruise Control (ACC)

Popular Owner Manuals

Latest Owner Manuals