WARNING
Metallic objects on the shelf can become very hot. This can cause burns or fires.
● Do not place any metal or metallic objects on the shelf for the wireless charging function.
● Remove any foreign objects immediately.
NOTICE
If cards or objects with a magnetic stripe or chip are placed on the shelf for the wireless charging function, this may damage the data
stored on them.
● Do not place any ID, bank and credit cards etc. with a magnetic stripe or chip on the shelf for the wireless charging function.
The mobile telephone can become hot during wireless charging. Keep the ventilation grooves clean as they improve the airflow
around the mobile telephone → Fig. 1.
Mobile telephone is not charged
A message about a foreign object in the stowage compartment may be displayed on the Infotainment system.
An unfavourable position of the mobile telephone on the lining mat can impair the charging function. This can already be the case in
the event of small changes in position, e.g. due to vibrations.
The position of the mobile telephone must be corrected to re-establish the correct charging function.
1. Align the mobile telephone centrally on the charging area.
The charging function can also be impaired by metal and above all magnetic parts of a mobile telephone or its protective cover.
1. Turn the mobile telephone by around 180° and align on the charging area with the display still facing upwards.
If cards or objects with a magnetic stripe or chip are placed on the lining mat for the wireless charging function, this may damage the
data stored on them.
Depending on model, an error message with the red Qi symbol may be displayed on the Infotainment system. It is then not possible to
use the wireless charging function.
1. Remove ID cards, bank cards and credit cards with magnetic stripe or chip from the lining mat. The error message closes
automatically.
You can then charge the mobile telephone again using the wireless charging function.
If the mobile telephone becomes too hot on the mat, it may switch off for safety reasons. It is then not possible to use the
wireless charging function.
1. Remove the mobile telephone from the mat and allow it to cool down in another stowage compartment. You can then charge it
again using the wireless charging function.
Cybersecurity comprises measures to reduce the risk of unauthorised access by malware or an internet attack on vehicle functions,
data and control units. Connectivity components in particular are subject to the risk of unauthorised access or internet attacks.
Connectivity components are control units for data transmission, interfaces, media and diagnostic connections via which information
and data can be exchanged between the vehicle and mobile devices or the internet.
Connectivity components are equipped with security mechanisms that minimise the risk of unauthorised access to vehicle systems.
The connectivity components include the following in particular:
—Diagnostic port.
—Control unit with embedded eSIM card.
—Mobile phone interface.
English 