Advertisement

Advertisement

Heating and air conditioning system -> Seat ventilation for Your Volkswagen T Cross SUV First Generation (2018-2025)

Outside temperature approximately below 35  
° C  
The recirculation mode prevents contaminated  
outside air getting into the interior of the vehi-  
cle.  
After pressing the  
button, the  
symbol  
is shown in the Climatronic display even if the  
conditions for switching on the cooling system are  
not met. The cooling system switches on when the  
conditions for switching on the cooling system are  
met.  
Operation  
Heated rear window  
— Using the button on the operating part of the  
air conditioning.  
With a temperature setting outside of the number  
range, one of the following icons will be displayed in  
the Climatronic display:  
Windscreen heating switches off automatically after  
some time.  
If the engine is switched off when the heating is on  
and turned back on again within about 10 minutes,  
the heating is continued.  
LO  
HI  
Maximum cooling power  
Maximum heating power  
When the air conditioner is operating, the en-  
gine idle speed may increase automatically.  
Troubleshooting  
The indicator light in the button or below the but-  
ton flashes  
Troubleshooting  
The heating does not work as the battery charging  
level of the 12 volt vehicle battery is too low.  
Water under the vehicle  
When the cooling system is switched on, water can  
drip off the air conditioning system. This is not  
a leak.  
Seat ventilation  
Fogging  
— Switch on automatic mode.  
Or:  
What you should be mindful of  
— Increase the blower speed, switch on the cooling  
system, and set the air distribution to the wind-  
screen.  
NOTICE  
Risk of seat damage!  
Do not kneel on the seats or otherwise apply con-  
centrated pressure to them.  
·
Automatic switch-off of the cooling system  
If the coolant temperature is too high, the cooling  
system may switch off automatically. This ensures  
sufficient engine cooling.  
Do not turn on the ventilation in the following sit-  
uations:  
·
— The seat is not occupied.  
— There are objects on the seat, such as a child  
seat.  
Heated windscreen  
— There are additional seat covers or protective  
covers on the seat.  
Usage  
Windscreen heating is used for defrosting or venti-  
lating the windscreen.  
Requirements  
Running engine  
Requirements  
Running engine  
Heated windscreen  
57  
Operation  
Driver information system  
— Press the or button above the control panel  
of the air conditioner.  
Analogue instrument cluster  
The ventilation is switched on with maximum venti-  
lation output. By repeatedly pressing the button, the  
ventilation output is reduced until it is switched off.  
Overview  
Overview of instrument cluster  
The ventilation output is indicated by the number of  
illuminated indicator lights in the button.  
The ventilation can be adjusted with the igni-  
tion on. The ventilation is only switched on af-  
ter the engine has been started.  
A
B
C
D
E
F
Tachometer with indicator lights  
Display  
Speedometer with indicator lights  
Bar with indicator lights  
Coolant temperature gauge  
Multifunction button  
:
— Setting the time  
— Display service interval  
Multifunction button  
G
H
:
— Reset odometer (trip)  
Fuel gauge  
NOTICE  
Risk of serious damage to the engine and the ex-  
haust system!  
Never run the fuel tank completely empty!  
·
In poor visibility and with dipped headlights  
off, the brightness of the instrument cluster  
lighting is reduced to remind the driver to turn on  
the light.  
Display overview  
The following information is shown in the display:  
58  
Driver information system