Advertisement

Advertisement

Keys, locks and alarm system -> Deactivate keyless locking for Your Volkswagen T Cross SUV First Generation (2018-2025)

— Release the door handle.  
Lock  
Locking the door without the lock cylinder  
— Close the door.  
— Open the door.  
— Press the button .  
— Insert the key or a flat-head screwdriver into the  
slot.  
After locking, it is not possible to unlock within  
2 seconds by touching the door handle.  
— Use the key or a flat-blade screwdriver to push it  
in towards the door.  
Unlocking the boot lid  
— Press the handle of the boot lid.  
After closing, the door is locked.  
Protection against inadvertently locking the key in  
the vehicle  
Deactivate keyless locking  
If the key is locked inside the vehicle, the vehicle will  
unlock itself automatically. If no door is opened  
within 45 seconds, the vehicle automatically locks  
again.  
Usage  
If the key is locked in the boot, the boot lid will au-  
tomatically unlock itself.  
The keyless locking system, (Keyless Access), ena-  
bles unlocking and locking of the vehicle without ac-  
tively using the remote control key.  
Settings  
Operation  
Deactivate keyless locking  
Keep the key with you when unlocking and locking.  
— Lock the vehicle with the button on the key.  
— Press the button on the door handle within 5 sec-  
onds.  
Release  
Deactivation is confirmed by a single flash of the  
direction indicators.  
— To check the deactivation, wait at least 10 sec-  
onds and then pull the door handle.  
The door must remain locked.  
Keyless locking is automatically activated once again  
after the vehicle is unlocked.  
— Grab the door handle.  
— Press the button .  
— Open the door.  
Troubleshooting  
The vehicle cannot be unlocked or locked with the  
remote control  
— Lock or unlock the vehicle with the button on the  
key.  
24  
Keys, locks and alarm system  
— Min. Then try to unlock or lock the vehicle using  
the sensors on the handle.  
Operating conditions  
— If keyless locking does not work, seek the help of  
a specialist garage.  
For the correct functioning of the alarm system, all  
windows must be closed.  
If the vehicle is not unlocked for a longer peri-  
od of time, the function can be deactivated  
automatically.  
When the ignition was switched on, no key was  
found  
illuminates  
Message that no key was found in the vehi-  
cle  
— Insert the key into the vehicle.  
Alarm system  
Functionality  
When an alarm is triggered, acoustic and optical sig-  
nals are output.  
The alarm system is activated automatically approxi-  
mately 30 seconds after the vehicle is locked.  
The alarm system is automatically deactivated after  
the vehicle is unlocked.  
Alarm triggering  
The activated alarm system triggers an alarm when  
the following events occur:  
— Opening the bonnet  
— Opening the boot lid  
— Opening the door  
— Manipulation of the ignition lock  
— Opening the door unlocked via the lock cylinder  
— Press the button for the alarm system on the key  
(only applies to key variant 2 » page 21)  
Switching off the triggered alarm  
— Unlock the vehicle.  
Or:  
— Turn on the ignition.  
Or:  
— Press the button for the alarm system on the key  
(only applies to key variant 2 » page 21).  
Alarm system  
25