Advertisement

Advertisement

Maintaining and cleaning -> Exterior for Your Volkswagen T Cross SUV First Generation (2018-2025)

After washing with a wax preservation  
Exterior  
— Wipe off the windscreen wiper blades with a dry  
cloth.  
What you should be mindful of  
Wash with a pressure washer  
WARNING  
NOTICE  
Risk of accident!  
Follow the operating instructions for the high-  
After washing the vehicle, the functionality of the  
brake system may be affected by moisture and, in  
winter, by ice.  
·
pressure cleaner, in particular the instructions re-  
lating to the pressure and the spray distance to  
the vehicle surface.  
Dry and clean the brakes by braking several  
·
Do not direct the water jet directly at the follow-  
ing vehicle parts:  
times.  
·
NOTICE  
— Films  
— Lock cylinder  
Bird droppings, insect residues, litter and sea salt  
residues, overflowed fuel etc. are to be removed  
as soon as possible.  
·
— Columns on the vehicle  
— Camera lenses and sensors  
— Plastic, chromed and anodised parts  
Do not use rough sponges, scourers or similar to  
remove dirt.  
·
Use cleaning agents intended for cleaning and  
care of the individual materials.  
Remove snow and ice  
·
NOTICE  
Do not use aggressive cleaning agents or chemi-  
cal solvents.  
·
Remove snow and ice with a plastic scraper or  
a suitable deicing agent.  
·
Do not polish the vehicle in a dusty environment.  
·
Clean the cameras with a hand brush.  
·
NOTICE  
Only move the scraper in one direction.  
·
Paint damage should be repaired as soon as pos-  
sible.  
·
Do not use scratchers or other sharp objects for  
foils.  
·
Do not treat painted parts with or hard waxes.  
·
Do not remove snow and ice with hot or warm  
water.  
·
Do not polish panels.  
·
Do not remove snow and ice from surfaces with  
coarse dirt.  
We recommend treating door seals and window  
·
·
guides with the appropriate materials from Volks-  
wagen original accessories. These ensure that the  
protective lacquer layer of the seals and window  
guides is not attacked.  
Instructions for cleaning  
Do not use abrasive cleaners to clean the revers-  
ing camera.  
·
Handwash  
Before driving through a car wash  
— Wash the vehicle from top to bottom with a soft  
sponge or wash glove and plenty of water, if nec-  
essary with additional suitable cleaning agents.  
— Observe the usual specifications of the car wash,  
e.g. close all windows, fold the mirrors, unscrew  
the antenna rod, etc.  
— Use a mild soap solution for foils and headlights  
1)  
.
— Move the windscreen wiper lever to position  
to adjust.  
— Use a glass cleaner for the windscreen wiper  
blades.  
— If there are special attachments on your vehicle,  
observe the instructions of the car wash operator.  
— Wash the cameras with clean water and dry with  
a suitable clean wipe.  
1)  
A mild soap solution consisting of 2 tablespoons of white neutral soap to 1 litre of lukewarm water.  
Exterior  
127  
NOTICE  
WARNING  
Risk of an accident!  
Wash out the sponge or wash mitt regularly.  
·
·
Severe dirt on the wheels can result in the  
wheels unbalancing.  
·
Use a different sponge for wheels, sills and the  
lower part of the vehicle than that used for the  
other vehicle parts.  
Car jack  
Do not wash the vehicle in the blazing sun.  
Do not dry the headlights or use sharp objects.  
·
·
·
— If necessary, treat moving parts with suitable  
grease.  
Do not put pressure on the bodywork when wash-  
ing.  
The temperature of the washing water may be  
a max. 60 °C.  
·
After hand washing  
— Rinse the vehicle and wipe it with a suitable clean  
cloth.  
Vehicle paint  
— Preserve the varnish at least twice a year with  
hard wax.  
— Use a polish for matt lacquers.  
Films  
Films will age and become brittle – this is entirely  
normal: this is not an error.  
The following factors have a negative effect on the  
life or colour fastness of the films:  
— Sun rays  
— moisture  
— Air pollution  
— Stones, e.g. due to the rebound of the cargo dur-  
ing transport on the roof rack  
Protection of hollow spaces  
Corrosion-prone cavities of the vehicle are perma-  
nently protected by preservative wax at the factory.  
— Remove spilled wax with a plastic scraper, clean  
stains with mineral spirits.  
Underseal  
The underside is permanently protected by the fac-  
tory against chemical and mechanical influences.  
— Have the protective coating checked by a special-  
ist garage before starting and at the end of the  
cold season.  
Wheels  
— After washing, preserve the wheels with suitable  
means.  
128  
Maintaining and cleaning