Polo 2018 ➤, Polo 2022 ➤, Taigo 2022 ➤
Maintenance - Edition 10.2021
♦ Mileage
The following vehicle data can be found in the vehicle registra‐
tion certificate part 1:
♦ Registration number: “e.g. WOB-HH 1234”
♦ Emission key number “Field 14.1 (code for field 14)”
♦ Vehicle manufacturer: “Field 2”, “Field 2.1 (code for field 2)”
♦ Vehicle identification number “field E”
♦ Type and version “Field D2 (type only)”, “Field 2.2 (code for
field D.2)”
Specified data input for EET
There are different ways to enter the specified data:
♦ 1. By manual input
♦ 2. By bar code input from EET data sheet
♦ 3. Through ELSA web service
Note
♦ To use the ELSA web service, the exhaust gas testing sta‐
tion L which is used for the exhaust emissions test must be
integrated in the workshop network.
♦ The ELSA web service automatically transmits the data for
the specific vehicle via the network to the respective mask.
Manual specified data input for EET:
Note
All test conditions and data required for exhaust emissions test
can be found in the ⇒ Data sheets for exhaust emissions test
for respective engine.
– Perform manual data input according to instructions on dis‐
play.
– Enter displayed values on EET data sheet in column “Test
values for exhaust emissions test” on display as follows:
1 - Test speed (idling speed)
2 - Warm-up phase for catalytic converter
3 - Engine temperature
4 - Increased idling speed
5 - CO content at increased idling speed
6 - Lambda at increased idling speed
7 - Idling speed
8 - Select regulating probe type; either “Step-type probe” or
“Broad-band probe”.
9 - Lambda probe value
Specified data input for EET as bar code:
– If specified data for EET are available as bar code, read bar
code of EET data sheet with bar code reader.
5. Exhaust emissions test
187
English 