Advertisement

Advertisement

Parking and maneuvering for Your Volkswagen Taos SUV First Generation (2022-2025)

Parking and maneuvering  
Parking the vehicle  
Parking  
1. Press and hold the brake pedal.  
2. In vehicles with an automatic transmission, move the selector lever into the P position.  
3. Set the electronic parking brake.  
4. On uphill and downhill slopes, turn the steering wheel so that the vehicle will roll into a curb if it begins moving.  
5. Stop the engine and switch the ignition off.  
The red  
indicator light in the instrument cluster display will turn on   
.
6. Release the brake.  
7. To engage the steering lock, you may need to turn the steering wheel slightly.  
8. Exit the vehicle ⇒  
. Pay attention to other road users.  
9. Take all vehicle keys with you and lock the vehicle.  
WARNING  
Parking the vehicle incorrectly can result in the vehicle rolling, even on slight downhill slopes. Accidents and serious or  
fatal injuries could result.  
Before exiting the vehicle, make sure the electronic parking brake is activated and the red warning light  
comes on in the Volkswagen Digital Cockpit display once the ignition has been switched off.  
Ignition switch: Never remove the remote vehicle key from the ignition switch when the vehicle is in motion.  
Otherwise, the steering lock could engage suddenly. Then you would not be able to steer the vehicle.  
When parking the vehicle, always follow the steps in the specified order.  
WARNING  
If you leave children, people requiring assistance or animals unattended in the vehicle, they may accidentally set the  
vehicle in motion or be subjected to very high or low temperatures. There is a risk of accidents and serious or fatal  
injuries.  
Never leave children, people requiring assistance or animals unattended in the vehicle.  
Parking spaces and surroundings  
To avoid damage and dangerous situations, always park the vehicle in a suitable parking area ⇒  
.
NOTICE  
Any unevenness in the ground, as well as sand or mud, may prevent the vehicle from being parked safely. This can result  
in damage to the vehicle.  
Always park the vehicle on firm and level ground.  
246  
NOTICE  
Vehicle components that are low to the ground such as the bumpers, spoilers, and parts of the suspension may collide  
with objects protruding up from the ground when they are driven over. The vehicle can be damaged.  
Drive carefully over driveways, ramps, curbs and fixed barriers, as well as when driving through dips.  
Rear seat information  
The function depends on the vehicle equipment.  
If the ignition is switched off, a message appears in the Infotainment system to remind you not to leave behind passengers in  
the rear seats ⇒  
.
If a rear door was used prior to driving, a message will also be displayed in the instrument cluster and a warning tone will  
sound if necessary. The warning tone can be set in the vehicle settings of the Infotainment system.  
Rear seat information muted.  
Electronic parking brake  
The electronic parking brake secures  
the parked vehicle to prevent it rolling  
away. It can be used to brake the  
vehicle in an emergency.  
Fig. 121 In the center console: button for the electronic parking brake.  
Switching on  
The red warning light in the instrument cluster comes on when the vehicle is held securely in place.  
1. When the vehicle is stationary, pull and hold the button for the electronic parking brake  
fig. 121.  
The yellow indicator light in the  
button comes on and the red  
warning light in the instrument cluster comes on.  
The electronic parking brake is engaged.  
Switching off  
1. Switch the ignition on.  
247  
2. Press the brake pedal and press the  
button.  
The indicator light in the button and the red  
warning light in the Volkswagen Digital Cockpit will turn off.  
Automatic switch-on if you leave the vehicle incorrectly  
On vehicles with an automatic transmission, if the system detects that the vehicle has been exited improperly, it can switch on  
the electronic parking brake automatically ⇒  
.
WARNING  
Parking the vehicle incorrectly can result in the vehicle rolling, even on slight downhill slopes. Accidents and serious or  
fatal injuries could result.  
When parking the vehicle, always follow the steps of the parking procedure in the specified order Parking.  
Before exiting the vehicle, make sure the electronic parking brake is activated and the red  
the Volkswagen Digital Cockpit display comes on after switching off the ignition.  
warning light in  
Automatic switch-off when starting to drive  
If one of the following situations occurs when the driver door is closed, the electronic parking brake will release automatically  
as you drive off ⇒  
:
Automatic transmission: A gear is engaged and the accelerator pedal is pressed.  
WARNING  
If the accelerator pedal is accidentally pressed when the electronic parking brake is activated, this may release the  
electronic parking brake. The vehicle will start moving. Accidents and serious injuries could result.  
Do not press the accelerator pedal when the engine is running and a gear is engaged if the vehicle is to be brought  
to a standstill.  
Starting to drive on steep inclines or with increased vehicle weight  
You can prevent the electronic parking brake from releasing automatically if you pull the  
while starting to drive.  
button upward for a short time  
If more engine power is required when starting to drive, the electronic parking brake will release only after the  
released.  
switch is  
Holding Force on Steep Inclines  
If the gradient of the parking area is too steep, the vehicle may not be held securely in place.  
The warning light in the instrument cluster display will flash red and a message will appear.  
1. Park the vehicle in a different parking space with a lower gradient.  
The vehicle is not held securely in place until the  
indicator light stays on.  
Driving through a car wash  
If you would not like the electronic parking brake to switch on automatically, e.g. in a car wash, note the following:  
1. Automatic transmission: Put the vehicle in neutral N.  
Emergency braking function  
248  
Only use the emergency braking function in an emergency, if the vehicle cannot be stopped using the brake pedal ⇒  
1. Pull and hold the switch.  
.
The vehicle will brake abruptly. A warning chime will also sound at the same time.  
The electronic parking brake is switched on when the vehicle is stationary.  
WARNING  
The electronic parking brake is not designed for braking the vehicle, as doing so increases the braking distance. This  
could result in accidents and serious or fatal injuries.  
Always use the brake pedal to brake the vehicle and never the electronic parking brake unless it is an emergency.  
Noises can be heard when you switch the electronic parking brake on of off. This may also occur during an automatic  
check.  
Troubleshooting  
/
Electronic parking brake malfunction  
The yellow central warning light comes on. The  
display.  
symbol with a message is additionally shown in the instrument cluster  
There is a system malfunction.  
1. Contact a suitably qualified professional. Volkswagen recommends contacting an authorized Volkswagen dealer or  
authorized Volkswagen Service Facility.  
The electronic parking brake does not switch off  
The requirements for switching off the electronic parking brake are not met Electronic parking brake.  
The 12 V vehicle battery is drained Preparing and Performing a Jump-start.  
Information about the parking systems  
Safety instructions  
WARNING  
Parking systems are not a replacement for the driver's attention and can only operate within the limitations of the system.  
The parking systems cannot detect all driving situations and may not react, or may react with a delay, or may react in a  
way that is not desired. If you are careless, there is a risk of accidents, serious injuries and death.  
Always stay attentive and do not rely solely on the system. The driver is always responsible for control of the  
vehicle.  
Always keep an eye on the direction of travel and the vehicle surroundings when parking.  
Pay particular attention to small children, animals and objects when parking.  
Do not allow the parking system's display to distract you from the traffic around you.  
Bear in mind that the parking system may not react if the vehicle approaches too quickly and will not issue a  
warning.  
Always adapt your speed and driving style to the visibility, weather, road and traffic conditions.  
249  
NOTICE  
When you maneuver in a parking space without a curb, the vehicle may be damaged by obstacles.  
Keep a safe distance of approx. 50 cm (around 20 in) from walls and buildings.  
Sensor and camera boundaries  
Various sensors and cameras that detect the vehicle surroundings ultrasonically, by radar waves, and visually are located on  
and in the vehicle. The various parking systems use different combinations of sensors. All sensors have technical and physica  
limits ⇒  
In some situations, some objects may not be detected, e.g. trailer draw bars, narrow poles, fences, posts, and trees,  
extremely low or high obstacles, or trunk lids that are opening or already open ⇒  
:
.
The parking system coverage areas have “blind” spots in their range where they cannot detect people and objects.  
Dirt, ice, or water on the sensors and cameras may be detected as obstacles or prevent the detection of objects in some  
cases. In addition to dirt and snow, soap residue or other coatings can also impair the sensor range page , Exterior  
care and cleaning.  
External noises and certain surfaces on objects and clothing can affect the sensor signals. In some situations, people an  
objects may not be detected or may be detected incorrectly.  
Certain objects, such as small posts or grating, cannot be shown or cannot be adequately shown due to the resolution of  
the screen and if there is insufficient lighting.  
The cameras only show two-dimensional images on the screen. Due to the lack of depth of field, it may be difficult or  
impossible to identify protruding objects or recesses in the road.  
Volkswagen recommends practicing with the parking systems in a location or parking space with no traffic in order to  
become acquainted with the functions.  
Requirements  
The use of parking systems, e.g. with camera assistance, may not be allowed in some countries and regions according to  
legal provisions.  
General information  
So that the sensors and cameras can detect the area surrounding the vehicle as well as possible and display this image on  
the Infotainment system screen, the following requirements must be met.  
The doors and trunk lid are closed.  
The outside mirrors must not be folded in.  
Sensors or cameras are not covered by attachments, e.g. bicycle rack systems, or license plate holders with decorative  
frames. The decorative license plate holder must not protrude at the sides or bottom.  
The vehicle must be on level ground.  
The vehicle must not be loaded primarily in the rear or on one side.  
Engine is running.  
Braking assistance systems such as ESC or ASR are switched on.  
If you use any other functions in the Infotainment system while you are parking, the parking function and its warning  
chimes will be deactivated.  
250  
Finding a suitable parking space  
The length and width of the parking space must be larger than the vehicle measurements and provide enough space to  
maneuver.  
The distance when driving past the parking space is approx. 1 m (approx. 3 feet).  
Automatic braking intervention  
The automatic braking function of the  
parking system helps to avoid  
collisions once an obstacle is detected.  
Parking systems with braking support  
Depending on the vehicle equipment, the vehicle has parking systems with a maneuvering and/or emergency braking function  
.
The automatic braking support of Park Distance Control is only possible in the rear area.  
WARNING  
Automatic braking support is not a replacement for the driver's attention and works only within the system limitations. In  
some driving situations, the automatic braking support may be limited or may intervene in a way that is not desired or may  
not engage at all. If you are careless, there is a risk of accidents, serious injuries and death.  
Always stay attentive and do not rely solely on the system. The driver is always responsible for control of the  
vehicle.  
In a hazardous situation, apply the brakes using the brake pedal before encountering an obstacle.  
React quickly to parking system warnings, e.g. Park Distance Control.  
When is automatic braking available?  
A parking system has been activated by the driver.  
When maneuvering, the vehicle is not driving faster than approx. 10 km/h (approx. 6 mph).  
What happens during an automatic braking intervention?  
The vehicle brakes to a stop and is kept stationary for around two seconds.  
Automatic braking by the maneuver braking function. Stop the vehicle with the brake pedal!  
Automatic braking  
intervention by Rear Traffic Alert. Stop the vehicle with the brake pedal!  
Depending on the vehicle equipment, there may be a message on the instrument cluster display.  
Maneuver braking for Park Distance Control  
Maneuver braking brakes only in the event of obstacles in the rear area and is automatically switched on after each time the  
ignition is switched on.  
Maneuver braking can be temporarily deactivated via the  
function key in the Park Distance Control screen display.  
After a braking intervention, maneuver braking may be inactive for a short distance or may only be ready for operation  
after a gear change. Drive carefully for the first few meters, e.g. in case of further obstacles in the vicinity.  
General information  
Switch the parking system off temporarily if automatic braking support happens too frequently or when undesired and  
maneuver the vehicle carefully, for example when driving off-road or parking in your garage.  
251  
Following a Rear Traffic Alert emergency braking intervention, it will take approx. 10 seconds before automatic braking  
support can occur again.  
Troubleshooting  
The parking system is functioning differently than expected  
The requirements for the parking system are not met Requirements.  
The areas detected by the sensors or camera may be blocked by accessories such as bicycle racks.  
The sensors are dirty or covered in ice Exterior care and cleaning , ⇒  
The camera is dirty or icy and the camera image is unclear Exterior care and cleaning , ⇒  
Sources of noise interfere with the ultrasonic signal, e.g. driving over cobblestones ⇒  
.
.
.
The vehicle may be damaged in the radar sensor area, for example, due to parking barriers or an accident ⇒  
There may have been changes to the paint or vehicle structure in the area where the sensors or camera are located, for  
example on the front of the vehicle or the suspension ⇒  
.
.
Fault displays  
1. Note any messages on the instrument cluster display and in the Infotainment system.  
NOTICE  
If you use the parking system despite a malfunction, the vehicle may be damaged.  
Contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility in the event of a parking  
system malfunction. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized  
Volkswagen Service Facility.  
No sensor range or Park Distance Control malfunction  
If a sensor malfunctions, the sensor area is deactivated. The symbol shows the affected sensor area in the Infotainment  
system.  
Park Distance Control is switched off completely if necessary.  
If Park Distance Control is malfunctioning, a continuous tone will sound for several seconds when you switch it on. Where  
applicable, a message will appear in the instrument cluster display.  
1. Check if one of the causes listed above is responsible.  
2. Once the source of the issue has been resolved, switch the system on again.  
3. If the problem persists, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen  
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Maneuver braking restricted or not available  
A message is displayed in the Infotainment system or instrument cluster.  
Automatic braking occurs unexpectedly or does not occur as usual. If the function is switched off, automatic braking does not  
occur.  
1. Check the sensors on the vehicle for damage or dirt and clean them if necessary Exterior care and cleaning.  
2. Switch the ignition off and back on again.  
3. If the problem persists, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen  
252  
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Malfunction of Camera Image of the Rear View Camera System  
The camera image is unclear, “flickering” or has been disabled.  
A technical malfunction may have occurred.  
1. In the event of an unclear camera image, clean the Rear View Camera system Exterior care and cleaning.  
2. If the problem persists, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen  
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Parking Function Screen Not Displayed Following Activation  
The parking system has been switched on or activated, yet the display in the Infotainment system does not change to the  
function-specific screen, e.g. segment display for Park Distance Control, camera display during Park Assist.  
1. Switch the parking system off and on again.  
2. If the screen is still not displayed, a system malfunction has occurred. Contact a suitably qualified professional.  
Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Park Distance Control (PDC)  
Introduction  
Park Distance Control assists the driver  
when parking and warns if there are  
obstacles.  
System function  
Using ultrasonic sensors, Park Distance Control detects the distance between the vehicle and an obstacle.  
The Park Distance Control warns you of a collision via colored segments on the screen of the Infotainment system and via  
warning chimes fig. 122, ⇒  
.
If the driver does not respond to an approaching obstacle, automatic braking support may intervene (depending on the vehicle  
equipment) page , Automatic braking intervention.  
WARNING  
The Park Distance Control is not a replacement for the driver's attention and works only within the system limitations. Park  
Distance Control might not be able to detect some obstacles and may not react, may react late, or may react in a way that  
is undesired. If you do not take care, there is a risk of accidents and serious injuries.  
Always stay attentive and do not rely solely on the system. The driver is always responsible for control of the  
vehicle.  
React quickly to the Park Distance Control visual warnings and chimes.  
Apply the brakes using the brake pedal before encountering an obstacle.  
NOTICE  
The system will only provide visual and audible warnings for obstacles within the vehicle's path. The collision area has  
been reached, at the latest, when the second to last segment is displayed in the Park Distance Control screen or a  
continuous warning tone sounds. There is a risk of damage to the vehicle.  
Always brake the vehicle in good time before encountering an obstacle.  
253  
NOTICE  
Depending on the vehicle equipment, distances to obstacles in the side areas are also displayed. Any obstacles that enter  
these areas from the outside are not displayed. The vehicle may be damaged in this instance.  
In order to fully scan and display the side areas, move the vehicle a few meters forwards or backwards.  
Screen display  
Fig. 122 Infotainment system: display of rear Park Distance Control (general example).  
Red section of the image: Nearby obstacle. The vehicle is at risk. Brake!  
Yellow section of the image: Obstacle in the  
path of the vehicle. The vehicle is at risk. Steer around the obstacle. White or gray section of the image: Obstacle outside  
of the vehicle's path.  
chimes.  
Switch maneuver braking on and off (depending on the vehicle equipment).  
Mute the warnin  
Park Distance Control settings  
Depending on the vehicle equipment, settings for the Park Distance Control can be adjusted in the vehicle settings in the  
Infotainment system Vehicle settings menu.  
Switching Park Distance Control (PDC) on and off  
Please read the introductory information and heed the Warnings and Notice   
and Safety instructions.  
254  
Fig. 123 In the center console: Park Distance Control button (depending on the vehicle equipment).  
The Park Distance Control button is located in the center console or in the Infotainment system, depending on the vehicle  
equipment.  
Switching on  
1. Select the reverse gear.  
Or: tap the  
function key in the Infotainment system (depending on the vehicle equipment).  
Or: Press the  
button in the center console (depending on the vehicle equipment) fig. 123.  
Or: The vehicle will roll backward.  
Switching off  
1. Tap the  
function key in the Infotainment system (depending on the vehicle equipment).  
Or: Press the  
button in the center console (depending on the vehicle equipment) fig. 123.  
Or: engage the P selector lever position.  
Park Distance Control also switches off when forward travel becomes faster.  
Automatic activation when driving forwards  
Park Distance Control activates automatically in the event of an obstacle in the front area, e.g. in dense traffic or when driving  
into a garage.  
The function can be deactivated in the Park Distance Control settings in the Infotainment system.  
1. To close the screen, tap the home button  
No automatic braking intervention takes place page , Automatic braking intervention . The braking support can be  
switched on via the function key.  
in the Infotainment system.  
The function is available again under the following conditions:  
The vehicle has been accelerated to more than approx. 15 km/h (approx. 9 mph) and then the speed has fallen below thi  
again.  
Or: the ignition has been switched off and on again.  
255  
Or: parking lock P has been changed to a gear.  
If an obstacle is detected in front of the vehicle, the Park Distance Control display appears in the Infotainment system. If  
the vehicle continues to approach the obstacle, a warning chime also sounds.  
If Park Distance Control only has sensors in the rear area, automatic activation is not possible when driving forward or  
when the vehicle rolls backward.  
Rear View Camera (Rear View)  
Introduction  
The Rear View Camera system in the  
rear of the vehicle makes it easier for  
the driver to see behind the vehicle  
and assists when parking.  
System function  
The Rear View Camera system shows the area behind the vehicle on the Infotainment system screen. Depending on the  
mode and vehicle equipment, orientation lines may assist in the view toward the rear ⇒  
.
WARNING  
The Rear View Camera system is not a replacement for the driver's attention and works only within the system limitations.  
Using the camera image to estimate the distance to people or obstacles may not be precise. If you do not take care, there  
is a risk of accidents and serious injuries.  
Always stay attentive and do not rely solely on the system. The driver is always responsible for control of the  
vehicle.  
Bear in mind that camera lenses can enlarge and distort the field of vision.  
The orientation lines superimposed on the camera image are shown by the system regardless of the vehicle's surroundings.  
There is no automatic obstacle detection by the camera while it is active. The driver must evaluate whether the vehicle will fit  
in the parking space.  
If a camera is installed in the trunk lid, the orientation lines are also hidden if the trunk lid is open.  
Switching the Rear View Camera system on and off  
Please read the introductory information and heed the Warnings and Notice ⇒  
and Safety instructions.  
The operation of the Rear View Camera system depends on the vehicle equipment.  
Switching on  
Rear View Camera system without parking mode selection:  
1. Select the reverse gear.  
Rear View Camera system with parking mode selection:  
1. Select the reverse gear.  
Or: tap the  
function key in the Infotainment system (depending on the vehicle equipment).  
button (depending on the vehicle equipment).  
Or: press the  
Switching off  
Rear View Camera system without parking mode selection:  
1. Disengage reverse gear.  
256