Get Parking and maneuvering -> Park Distance Control (PDC) Guide for Volkswagen Taos SUV First Generation (2022-2025)

recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

Malfunction of Camera Image of the Rear View Camera System

The camera image is unclear, “ﬂickering” or has been disabled.

A technical malfunction may have occurred.

1. In the event of an unclear camera image, clean the Rear View Camera system ⇒ Exterior care and cleaning.

2. If the problem persists, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen

recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

Parking Function Screen Not Displayed Following Activation

The parking system has been switched on or activated, yet the display in the Infotainment system does not change to the

function-speciﬁc screen, e.g. segment display for Park Distance Control, camera display during Park Assist.

1. Switch the parking system off and on again.

2. If the screen is still not displayed, a system malfunction has occurred. Contact a suitably qualiﬁed professional.

Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.

Park Distance Control (PDC)

Introduction

Park Distance Control assists the driver

when parking and warns if there are

obstacles.

System function

Using ultrasonic sensors, Park Distance Control detects the distance between the vehicle and an obstacle.

The Park Distance Control warns you of a collision via colored segments on the screen of the Infotainment system and via

warning chimes ﬁg. 122, ⇒

If the driver does not respond to an approaching obstacle, automatic braking support may intervene (depending on the vehicle

equipment) → page , Automatic braking intervention.

WARNING

The Park Distance Control is not a replacement for the driver's attention and works only within the system limitations. Park

Distance Control might not be able to detect some obstacles and may not react, may react late, or may react in a way that

is undesired. If you do not take care, there is a risk of accidents and serious injuries.

Always stay attentive and do not rely solely on the system. The driver is always responsible for control of the

vehicle.

React quickly to the Park Distance Control visual warnings and chimes.

Apply the brakes using the brake pedal before encountering an obstacle.

NOTICE

The system will only provide visual and audible warnings for obstacles within the vehicle's path. The collision area has

been reached, at the latest, when the second to last segment is displayed in the Park Distance Control screen or a

continuous warning tone sounds. There is a risk of damage to the vehicle.

Always brake the vehicle in good time before encountering an obstacle.

253

NOTICE

Depending on the vehicle equipment, distances to obstacles in the side areas are also displayed. Any obstacles that enter

these areas from the outside are not displayed. The vehicle may be damaged in this instance.

In order to fully scan and display the side areas, move the vehicle a few meters forwards or backwards.

Screen display

Fig. 122 Infotainment system: display of rear Park Distance Control (general example).

Red section of the image: Nearby obstacle. The vehicle is at risk. Brake!

Yellow section of the image: Obstacle in the

path of the vehicle. The vehicle is at risk. Steer around the obstacle. White or gray section of the image: Obstacle outside

of the vehicle's path.

chimes.

Switch maneuver braking on and off (depending on the vehicle equipment).

Mute the warnin

Park Distance Control settings

Depending on the vehicle equipment, settings for the Park Distance Control can be adjusted in the vehicle settings in the

Infotainment system ⇒ Vehicle settings menu.

Switching Park Distance Control (PDC) on and off

Please read the introductory information and heed the Warnings and Notice ⇒

and Safety instructions.

254

Fig. 123 In the center console: Park Distance Control button (depending on the vehicle equipment).

The Park Distance Control button is located in the center console or in the Infotainment system, depending on the vehicle

equipment.

Switching on

1. Select the reverse gear.

Or: tap the

function key in the Infotainment system (depending on the vehicle equipment).

Or: Press the

button in the center console (depending on the vehicle equipment) ﬁg. 123.

Or: The vehicle will roll backward.

Switching off

1. Tap the

function key in the Infotainment system (depending on the vehicle equipment).

Or: Press the

button in the center console (depending on the vehicle equipment) ﬁg. 123.

Or: engage the P selector lever position.

Park Distance Control also switches off when forward travel becomes faster.

Automatic activation when driving forwards

Park Distance Control activates automatically in the event of an obstacle in the front area, e.g. in dense trafﬁc or when driving

into a garage.

The function can be deactivated in the Park Distance Control settings in the Infotainment system.

1. To close the screen, tap the home button

No automatic braking intervention takes place → page , Automatic braking intervention . The braking support can be

switched on via the function key.

in the Infotainment system.

The function is available again under the following conditions:

The vehicle has been accelerated to more than approx. 15 km/h (approx. 9 mph) and then the speed has fallen below thi

again.

Or: the ignition has been switched off and on again.

255

Or: parking lock P has been changed to a gear.

If an obstacle is detected in front of the vehicle, the Park Distance Control display appears in the Infotainment system. If

the vehicle continues to approach the obstacle, a warning chime also sounds.

If Park Distance Control only has sensors in the rear area, automatic activation is not possible when driving forward or

when the vehicle rolls backward.

Rear View Camera (Rear View)

Introduction

The Rear View Camera system in the

rear of the vehicle makes it easier for

the driver to see behind the vehicle

and assists when parking.

System function

The Rear View Camera system shows the area behind the vehicle on the Infotainment system screen. Depending on the

mode and vehicle equipment, orientation lines may assist in the view toward the rear ⇒

WARNING

The Rear View Camera system is not a replacement for the driver's attention and works only within the system limitations.

Using the camera image to estimate the distance to people or obstacles may not be precise. If you do not take care, there

is a risk of accidents and serious injuries.

Always stay attentive and do not rely solely on the system. The driver is always responsible for control of the

vehicle.

Bear in mind that camera lenses can enlarge and distort the ﬁeld of vision.

The orientation lines superimposed on the camera image are shown by the system regardless of the vehicle's surroundings.

There is no automatic obstacle detection by the camera while it is active. The driver must evaluate whether the vehicle will fit

in the parking space.

If a camera is installed in the trunk lid, the orientation lines are also hidden if the trunk lid is open.

Switching the Rear View Camera system on and off

Please read the introductory information and heed the Warnings and Notice ⇒

and Safety instructions.

The operation of the Rear View Camera system depends on the vehicle equipment.

Switching on

Rear View Camera system without parking mode selection:

1. Select the reverse gear.

Rear View Camera system with parking mode selection:

1. Select the reverse gear.

Or: tap the

function key in the Infotainment system (depending on the vehicle equipment).

button (depending on the vehicle equipment).

Or: press the

Switching off

Rear View Camera system without parking mode selection:

1. Disengage reverse gear.

256

Parking and maneuvering -> Park Distance Control (PDC) for Your Volkswagen Taos SUV First Generation (2022-2025)

Related Topics

Parking and maneuvering

Popular Owner Manuals

Latest Owner Manuals