—In conditions where dust or sand has been blown up.
—Damage to the windscreen in the camera’s field of vision.
—If the camera window is covered by condensation, dirt, a sticker, snow or ice.
—If the camera is switched off automatically due to a high ambient temperature or prolonged exposure to direct sunlight. When the
camera is available again, Dynamic Light Assist will also be available once more.
—If the camera is faulty or the power supply is interrupted.
WARNING
Dynamic Light Assist may not be able to recognise all driving situations correctly and may not work properly in certain situations.
Dynamic Light Assist supports the driver. The driver is responsible for the vehicle lighting being switched on correctly. Improperly
switching on the main beam can distract and dazzle other road users. This can cause accidents and serious or fatal injuries.
● Always check the lighting yourself and adjust it to suit the light, visibility and traffic conditions.
● Switch off the main beam manually if it may cause dazzle to other road users.
WARNING
If the camera window is dirty, covered or damaged, the function of Dynamic Light Assist may be impaired. This also applies if changes
are made to the vehicle’s lighting system, for example if additional headlights are fitted. This can cause accidents and serious or fatal
injuries.
● Clean the camera window at regular intervals, and keep it free from snow and ice.
● Do not cover the camera window.
● Check the area of the windscreen which is in the camera’s field of view for damage at regular intervals.
The dynamic cornering light permits optimum illumination of the road.
The dynamic cornering light works only when the automatic lighting control
(around 6 mph).
is switched on and at speeds above around 10 km/h
The dynamic cornering light can be activated and deactivated in the vehicle settings in the Infotainment system (→ Vehicle settings
menu).
English 