Advertisement

Advertisement

Lights -> Turn signals for Your Volkswagen Tayron SUV First Generation (2018-2025)

Pressing the switch in the appropriate area:  
1
2
3
4
5
Change to the next massage program.  
Change to the previous massage program.  
Increase the intensity of the massage program.  
Reduce the intensity of the massage program.  
Switches the massage function on and off.  
Depending on equipment, further settings for the massage function can be made in the Infotainment system (→ Front seats,  
Infotainment system).  
WARNING  
Incorrect use of the seat functions can cause serious injuries.  
Always assume the correct sitting position before the start of the journey and maintain this position during the journey. This also  
applies to all passengers.  
Switch the massage function on and off only when the vehicle is stationary.  
Keep hands, fingers, feet and other body parts away from seat’s moving parts and adjustment range.  
On the left-hand side of the steering column: lever for turn  
signal, main beam and wipers.  
A
B
Indicate right  
Indicate left  
.
.
Switching turn signals on and off  
1. Switch on the ignition.  
2. Move the lever from the centre position to the required position → Fig. 1.  
3. To switch off the turn signal, move the lever to the basic position.  
Go to a suitably qualified workshop and have the vehicle checked if the acoustic signal does not sound when a turn signal is switched  
on. Volkswagen recommends using an authorised Volkswagen repairer.  
Convenience turn signal  
1. Push the lever up or down to the point where you encounter resistance and then release the lever.  
The turn signal flashes three times.  
To cancel the lane change flash, immediately move the lever in the opposite direction up to the pressure point and then release it.  
The convenience turn signal can be activated and deactivated in the vehicle settings in the Infotainment system (→ Vehicle settings  
menu).  
WARNING  
Incorrect use of turn signals, a failure to use turn signals, or forgetting to switch off a turn signal can confuse other road users. This  
can cause accidents and serious or fatal injuries.  
Always activate the turn signal in good time when changing lanes and performing overtaking or turning manoeuvres.  
Always switch off the turn signal once the lane change or overtaking or turning manoeuvre has been completed.  
The hazard warning lights also work when the ignition is switched off.  
Some settings can be stored in the personalised user accounts and therefore change when the user account changes.  
Switching lights on  
1. Switch on the ignition.  
2. Tap the  
function button as often as required until the corresponding indicator lamps light up.  
The dipped beam headlights are switched on. The indicator lamp lights up green.  
Automatic lighting control: dipped beam is switched on or off depending on the brightness level , (→ Automatic lighting  
control).  
Side lights switched on, the indicator lamp lights up green. The automatic lighting control function  
speed of around 10 km/h (around 6 mph).  
is activated from a  
Switching off the lights  
1. Switch off the ignition.  
The orientation lighting can be switched on (→ Orientation lighting).  
Side lights or continuous parking light on both sides of the vehicle switched on . The indicator lamp lights up green.  
- -  
Display only in the instrument cluster display: a text message appears stating that the lights are switched off.  
Daytime running lights