Get Seats and head restraints -> Folding the backrest of the rear bench seat forwards and backwards Guide for Volkswagen Tayron SUV First Generation (2018-2025)

3. Release the loop and engage the rear seat backrest in position by pushing forwards and backwards gently.

The rear seat backrest is split. Each part of the rear seat backrest can be folded down to increase the size of the luggage compartment.

Folding the rear seat backrest forwards with the loop

Rear bench seat: folding the rear seat backrest forwards and

backwards.

1. Push the head restraint all the way down.

2. Slide the rear bench seat back as far as it will go.

3. Pull the loop → Fig. 1 forwards in the direction of the arrow while simultaneously supporting and folding the rear seat backrest

forwards →

4. Fold the rear seat backrest completely forward by hand until it locks in place.

Folding rear seat backrest forwards with the remote release button

In the luggage compartment: remote release lever for the

left 1 and the right 2 parts of the rear seat backrest.

1. Push the head restraint all the way down.

2. Open the boot lid.

3. Pull the remote release lever → Fig. 2 in the direction of the arrow for the section of the backrest that is to be folded forwards.

The corresponding backrest section of the rear seat backrest is unlocked and can be folded forwards.

4. Close the boot lid if necessary.

Folding back the rear seat backrest

1. Use the loop to release the rear seat backrest → Fig. 1.

The rear seat backrest pops out of the catch.

2. Keep pulling on the loop while folding back the rear seat backrest.

3. Make sure that the seat belt is not caught anywhere.

4. Fold back the rear seat backrest and push it firmly into the catch so that it is securely engaged → . The release lever on the

seat must be in the basic position. The rear seat backrest must always be securely engaged.

5. Adjust the rear seat backrest if necessary.

6. Adjust the head restraint if necessary.

7. Close the boot lid if necessary.

Folding the rear seat backrest of the middle centre seat forward and back individually

Rear bench seat: folding the middle seat forward and back.

1. Push the head restraint all the way down.

2. Slide the rear bench seat back as far as it will go.

3. To fold the middle seat forwards, press the release lever down fully → Fig. 3.

4. Guide the rear seat backrest of the middle seat down with your hand until it is resting flat on the seat cushion →

Do not transport anyone on the middle seat if it is folded forward →

5. To fold the rear seat backrest of middle seat back, guide the rear seat backrest of the middle seat back by hand and press firmly

into the catch.

The red marking on the release lever → Fig. 3 1 must no longer be visible.

WARNING

Injuries can be caused if the rear seat backrest is folded forwards and backwards without due care and attention.

● While folding the rear seat backrest forward, always make sure that no people or animals are in its path.

● Never fold the rear seat backrest forwards or backwards while the vehicle is in motion.

● Ensure that the seat belt is not trapped or damaged when folding back the rear seat backrest.

● Always keep hands, fingers, feet and other body parts away from the swivel area when folding the rear seat backrest forwards and

backwards.

● Ensure that each rear seat backrest engages securely, otherwise the seat belts for the rear seats will not offer maximum

protection. This applies to the centre seat of the rear bench seat in particular. If a seat is occupied and the corresponding rear seat

backrest has not clicked securely into place, the seat occupant and rear seat backrest may move forwards in the event of a sudden

braking or driving manoeuvre or during accidents.

● If the rear seat backrest is folded forwards or is not engaged securely into place, passengers must not use these seats.

NOTICE

Damage to the vehicle, vehicle components, particularly the seat belts and their components, or to other objects could be caused if

the rear seat backrest is folded forwards and backwards in an uncontrolled way or without due care.

● Before folding the rear seat backrests forwards, always adjust the front seats so that the rear head restraints or rear seat cushions

do not collide with the front seats.

● Before folding the rear seat backrest forward, make sure that there is no latch plate of a seat belt in a belt buckle.

● Before folding down the rear seat backrest, always make sure that there are no objects located in its path.

Each rear seat can be folded down to increase the size of the luggage compartment.

Folding seats in the third row into the loading floor position

Third row of seats: folding the rear seat into the loading floor

position.

1. Open the boot lid.

2. Push the head restraint all the way down.

3. To avoid damage to the seat and belt, release the seat belt from both buckles.

4. Push the seats in the second row forwards.

5. Remove items from the floor area in front and behind the rear seat →

6. Remove objects from the seat recess behind the rear seat.

7. To unlock the rear seat backrest, pull the release lever → Fig. 1 1 fully to the rear.

8. Guide the rear seat backrest down with your hand until it is resting flat on the seat frame →

Do not transport anybody on this rear seat if it is folded forward →

9. Close the boot lid.

Folding back seats in the third row

Seats and head restraints -> Folding the backrest of the rear bench seat forwards and backwards for Your Volkswagen Tayron SUV First Generation (2018-2025)

Related Topics

Seats and head restraints

Popular Owner Manuals

Latest Owner Manuals