Emergency starting and starting the engine with a very weak vehicle battery or after the vehicle
battery has been replaced may change or delete system settings (including time, date, personal
convenience settings and programming). Check the settings and correct as necessary once the
vehicle battery has built up a sufficient charge.
Manual controls
Fig. 158 In the center console: Manual AC controls.
ꢀ Please first read and note the introductory information and heed the WARNINGS
Press the corresponding button to switch a function on or off. If a function is switched on, an indicator
light in or under the button lights up. To switch off a function, press the button again.
Button /
Knob
More information: Manual AC ⇒ꢀfig. 158.
Temperature
(1)
Turn knob to set the desired temperature. The ꢀ position provides maximum
cooling output. Recirculation mode and the cooling system switch on automatically.
ꢀ … ꢀ
Fan (2)
ꢁ, ꢀ
: Setting 0: the fan and manual air conditioning are switched off.
Setting 6: highest fan speed.
Air
distribution
(3)
Direct airflow by turning knob to any setting (continuously adjustable).
Defog / defrost button: Airflow is directed to the windshield. Recirculation mode
switches off automatically in this position. Increases the fan speed to clear the
windshield as quickly as possible. The cooling system switches on automatically to
dehumidify the air.
ꢂ
ꢀ
ꢁ
Air distribution to the air vents in the instrument panel.
Air distribution to the instrument panel and in the footwells.
English 
