2007-2016 Volkswagen Tiguan 4 Door Power locking system -> Unlocking or locking the vehicle from the outside User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Power locking system -> Unlocking or locking the vehicle from the outside for Your Volkswagen Tiguan 4 Door First Generation (2007-2016)

Function  
Action  
Locking the vehicle with the  
power locking button:  
– Switch the ignition off.  
– Open a door once.  
– Press the power locking button .  
Locking the vehicle with the  
remote control vehicle key:  
– Switch the ignition off and on again  
OR: Remove the remote control vehicle from the ignition.  
– Open a door once.  
– Lock the vehicle with the remote control vehicle key.  
If the remote control vehicle key buttons ⇒ꢀ Vehicle key set or one of the power locking buttons  
Unlocking or locking the vehicle from the inside are pushed repeatedly in quick succession, the  
power locking system is switched off for a brief period to help keep it from being overloaded. The  
vehicle is then unlocked for about 30 seconds. Unless a door or the rear hatch is opened during this  
time, the vehicle is automatically locked afterwards.  
Unlocking or locking the vehicle from the outside  
Fig. 27 Remote control vehicle key with panic button.  
Please first read and note the introductory information and heed the WARNINGS  
Function  
Using the buttons on the remote control vehicle  
key buttons ⇒ꢀfig. 27  
Unlock the vehicle.  
Press the button. Keep pressed to unlock all doors  
and the rear hatch.  
Lock the vehicle.  
Press the button.  
Press the button.  
Unlock the rear hatch.  
Note: Depending on the settings for the power locking system in the Convenience sub-menu on  
vehicles with the Premium instrument cluster, it may be necessary to press the button on the  
remote control vehicle key twice to unlock all doors and the rear hatch ⇒ꢀ Volkswagen Information  
System.  
The vehicle key unlocks or locks the vehicle only when the battery in the remote control key has  
enough power, and the remote control vehicle key is within a few yards/meters of the vehicle.  
All turn signals flash once and the horn beeps once to confirm that the vehicle has been locked.  
The horn beep can be disabled by deactivating the “ATA confirmation” feature in the Convenience  
submenu ⇒ꢀ Convenience sub-menu.  
All turn signals flash twice to confirm that the vehicle has been unlocked.  
If the turn signals do not flash to confirm locking, one or more doors, the rear hatch or the engine hood  
is not locked.  
If the driver door is open, the vehicle cannot be locked with the remote control vehicle key.  
If the vehicle was unlocked with the remote control vehicle key and the door or the rear hatch has not  
been opened in about 30 seconds, the vehicle is automatically locked again. This feature helps  
prevent you from leaving the vehicle unlocked unintentionally.  
Unlocking or locking the vehicle from the inside  
Fig. 28 On all 4 doors: Power locking button.  
Please first read and note the introductory information and heed the WARNINGS  
Press button ⇒ꢀfig. 28:  
Unlock the vehicle.  
Lock the vehicle.  
The power locking button works whether the ignition is switched on or off but only when all doors are  
closed.  
If the vehicle is locked with the remote control vehicle key, the power locking switch is deactivated.  
If the vehicle is locked with the power locking button:  
The yellow indicator light in the power locking button lights up ⇒ꢀfig. 28 to indicate that all doors  
and the rear hatch are locked.  
Opening doors or the rear hatch from the outside is not possible, at a traffic light, for example.  
Doors can be unlocked and opened separately from inside the vehicle by pulling the door handle to  
open the door. The indicator light goes out. The unopened doors and rear hatch remain locked and  
cannot be opened from the outside.  
An open driver door will not be locked. This helps keep the driver from being locked out of the  
vehicle.  

Related Topics

Popular Owner Manuals