Rear View Camera system with dynamic orientation lines
ꢀ Introduction
In this section you’ll find information about:
Operation
Perpendicular parking (Mode 1)
Parallel parking (Mode 2)
A camera in the rear hatch assists the driver while parking in reverse or maneuvering. The camera
image is shown together with orientation lines projected by the system on the screen of the factory-
installed navigation system.
Rear View Camera system may take a few seconds to bring up the camera image.
2 different orientation lines (modes) can be selected:
ꢀ
lot.
Mode 1: Backing into a parking space at right angles to the direction of traffic, such as in a parking
ꢀ
Mode 2: Parallel parking (parking parallel to the direction of traffic).
You can select the mode by tapping the function key on the radio or navigation system screen. Only
the mode selected is displayed.
More information:
ꢀ
Exterior views
ꢀ
ꢀ
⇒ꢀBooklet Radio or ⇒ꢀBooklet Navigation system
Parts, accessories, repairs and modifications
WARNING
Rear View Camera system is not able to give you a clear and undistorted view of all areas
behind the vehicle.
ꢀ
ꢀ
The camera has blind spots in which it cannot see people and objects.
Always be careful and look around you when parking. The camera cannot show people,
animals, and objects in certain situations. Watch out for small children and animals in
particular.
ꢀ
Due to the screen resolution, the camera may not pick up thin posts, chain-link fences and
similar fences, and other objects, or it may show them unclear.
The camera lens enlarges and distorts the field of vision and causes objects on the screen
to appear altered and imprecise.
Always keep the camera lens clean and free of snow and ice; do not cover the lens.
ꢀ
ꢀ
English 
