The MFI menu has 2 automatic trip memories: 1 – single trip memory and 2 – total trip memory.
The number of the memory is shown at the upper right of the display. The trip memories are in
addition to the trip odometer, which is displayed in the bottom part of the instrument cluster and
controlled using the 0.0/SET button on the right of the instrument panel ⇒ꢀfig. 11 (4), ⇒ꢀfig. 12 (4).
To display the distance driven on trips 1 and 2, select the Routeitem in the MFI menu (MFI>
Route). Press the OK button (⇒ꢀfig. 17) to toggle between Route 1 and Route 2 (trip 1 and trip 2).
Push and hold the OK button to manually reset a trip memory to 0.
The memory accumulates and stores information about distance driven and
fuel used from the time the ignition was switched on until the time it was
Single trip
memory
switched off.
1
2
If the ignition stays off for 2 hours or more, stored information is automatically
deleted. If the trip is continued within 2 hours after the ignition was switched
off, the new values are added.
The memory displays and stores the accumulated driving and fuel
consumption data of any number of single trips up to a total driving time of
99 hours and 59 minutes, and up to a total distance of 9999 miles (9999 km),
depending on the instrument cluster version. If one of the maximum values is
exceeded, then the memory is automatically cleared and starts again from 0.
Total trip
memory
Possible MFI menu displays
The following displays can be accessed in the MFI menu if enabled under Settings> MFI data.
Displays that are not enabled will not appear.
Display
Function
Travel time
Driving time in hours (h) and minutes (min) corresponding to trip
memories 1 and 2 (toggle).
Consumption
--.- mpg
Current fuel consumption in miles per gallon (l/100 km) while driving.
When units are set to miles, dashes appear instead of a number when
the engine is running and the vehicle is standing still.
When units are set to kilometers, the display shows liters consumed
per hour when the engine is running and the vehicle is standing still.
Consumption
--.- l/100 km
Av. consumption
--.- mpg
Average fuel consumption in miles per gallon (l/100 km) on trips per trip
memories 1 and 2 (toggle) is displayed once the vehicle has been
driven about 330 feet (100 m). Until then, dashes appear instead of a
number. The value displayed is updated every 5 seconds.
Av. consumption
--.- l/100 km
Range ꢀ -- mi
Range ꢀ -- km
Route -- mi
Estimated distance in miles (km) that the vehicle can go with the fuel
left in the tank the way you are currently driving. Takes account of the
current fuel consumption, among other things.
Distance driven in miles (km) per trip memories 1 and 2 (toggle).
Route -- km
English 
