Advertisement

Advertisement

2024-2025 Volkswagen Tiguan 4 Door Driver information User Manual

MY CAR USER MANUAL

Driver information for Your Volkswagen Tiguan 4 Door Third Generation (2024-2025)

Driver information  
Symbols in the instrument cluster  
The warning and indicator lights can turn on individually or in combination with each other and indicate warnings, malfunctions  
and certain functions. Some warning and indicator lights come on when you switch the ignition on and must turn off after som  
time.  
Indicator lights that turn on in the light switch are described in the “Lights” chapter ⇒ Switching the lights on and off.  
WARNING  
Failure to respond to illuminated warning lights and messages may result in a vehicle breakdown, accidents and serious  
injuries or death.  
Never ignore illuminated warning lights and messages.  
Stop the vehicle as soon as it is safe to do so.  
Do not continue driving!  
Central warning light ⇒ Priority 1 warning message  
Fasten safety belt ⇒ Fasten seat belts reminder and seat belt safety indicator  
Electronic parking brake switched on ⇒ Electronic parking brake  
Holding force of the electronic parking brake too low ⇒ Electronic parking brake  
Do not continue driving!  
Brake system malfunction ⇒ Brake system malfunctioning  
Do not continue driving!  
Brake fluid level too low ⇒ Brake fluid level  
Do not continue driving!  
Brake system malfunction ⇒ Brake system malfunctioning  
Check brake system ⇒ Brake pad wear indicator  
Take over steering and be ready to brake. ⇒  
Introduction  
Do not continue driving!  
Engine oil level too low ⇒ Engine oil level very low  
15  
Do not continue to drive!  
Engine oil pressure too low ⇒ Engine oil pressure too low  
Do not continue to drive!  
Engine coolant system malfunction ⇒ Engine coolant  
Do not continue driving!  
Steering malfunction ⇒ Steering malfunction  
Rear Traffic Alert has detected an obstacle to the rear ⇒ Rear Traffic Alert  
Do not continue driving!  
12 V energy supply malfunction ⇒ 12-volt power supply  
Collision warning ⇒ Warning levels and braking support  
Take over the steering immediately ⇒ Take over the steering immediately  
Do not continue to drive!  
Transmission overheating ⇒ Transmission overheating  
Central warning light ⇒ Priority 2 warning message  
Airbag or safety belt pretensioner with diagnostic device switched off ⇒ Airbag or safety belt pretensioner  
with diagnostic device switched off  
Airbag or safety belt pretensioner malfunction ⇒ Airbag or safety belt pretensioner malfunction  
Front passenger's front airbag deactivated ⇒ Front passenger's front airbag switched off  
Emergency Call Service limited ⇒ Emergency Call Service limited  
Emergency Call Service malfunctioning ⇒ Emergency Call Service malfunction  
Electronic parking brake malfunction ⇒ Electronic parking brake malfunction  
Check brake system ⇒ Brake pad wear indicator  
16  
Comes on: Electronic Stability Control (ESC) malfunction ⇒ ESC malfunction  
Flashes: Electronic Stability Control (ESC) or Anti-slip regulation (ASR) in operation ⇒ Electronic Stability  
Control (ESC)  
ESC Sport switched on ⇒ ESC Sport  
Electronic Stabilization Control (ESC) switched off ⇒ ESC Off  
Anti-Slip Regulation (ASR) switched off ⇒ ASR  
Anti-Lock Braking System (ABS) malfunction ⇒ ABS failure or malfunction  
Engine oil system malfunction ⇒ Engine oil system malfunction  
Engine oil level too low ⇒ Engine oil level too low  
Engine oil level too high ⇒ Engine oil level too high  
Engine oil system malfunction ⇒ Engine oil system malfunction  
Tank almost empty ⇒ Fuel tank almost empty  
Semi-automated driving assistance (Travel Assist) not available ⇒ Travel Assist is not available or is not  
functioning as expected  
Tank cap not closed ⇒ Fuel tank cap open  
Driving light failure ⇒ Exterior lighting malfunction  
Rain/light sensor malfunction ⇒ Rain/light sensor malfunction, ⇒ Rain/light sensor malfunction  
Windshield wiper malfunction ⇒ Windshield wiper malfunction  
Washer fluid level too low ⇒ Washer fluid level too low  
Steering malfunction ⇒ Steering malfunction  
17  
Do not continue to drive!  
Tire pressure low ⇒ Tire pressure low  
Do not continue to drive!  
Tire pressure monitoring system malfunction ⇒ Tire Pressure Monitoring System malfunction  
Autonomous Emergency Braking (Front Assist) switched off ⇒ Using Front Assist  
Cruise control system malfunction ⇒ Cruise control system malfunction  
Adjustable speed warning ⇒ Driving data menu  
Adaptive cruise control (ACC) not available ⇒ ACC is not available  
Semi-automatic vehicle control in a medical emergency (Emergency Assist) is functioning ⇒ Driving with  
Emergency Assist  
Lane Assist in control ⇒ Driving with Lane Assist  
Lane Assist in control ⇒ Driving with Lane Assist  
Semi-automatic vehicle control in a medical emergency (Emergency Assist) is functioning ⇒ Driving with  
Emergency Assist  
Side Assist malfunction ⇒ Side Assist malfunctioning  
Rear Traffic Alert brakes ⇒ Automatic braking intervention  
Engine control malfunction ⇒ Engine control malfunction  
Exhaust system malfunction ⇒ Exhaust-related malfunction  
Particulate filter clogged with soot ⇒ Particulate filter clogged with soot  
Engine RPM limited ⇒ Engine speed limited  
12-volt power supply malfunction ⇒ 12-volt power supply  
18  
Transmission malfunction ⇒ Transmission overheating  
Vehicle key not in vehicle ⇒ Valid vehicle key cannot be detected  
Press the brake pedal. ⇒ The engine is not starting, ⇒ Driving is restricted by the selector lever lock  
Turn signals ⇒ Turn signal indicator light  
Trailer turn signal ⇒ Trailer turn signal indicator light  
Speed stored, regulation active ⇒  
Introduction, ⇒ Switching ACC on and off  
Cruise control switched on, regulation active ⇒  
Lane Assist active ⇒ Driving with Lane Assist  
Lane Assist active ⇒ Driving with Lane Assist  
Introduction  
Semi-automated driving assistance (Travel Assist) active ⇒  
Introduction  
Adaptive Cruise Control (ACC) regulates, no vehicle driving ahead is detected ⇒ Switching ACC on and off  
Adaptive Cruise Control (ACC) regulates, vehicle driving ahead is detected ⇒ Switching ACC on and off  
Hill Descent Control is active ⇒ Hill Descent Control  
High beams or headlight flasher ⇒ Switching the high beam headlights on and off  
High beam or headlight flasher ⇒ Switching the high beam headlights on and off  
Hill Descent Control is not active ⇒ Hill Descent Control  
Outside temperature is below +39 °F (+4 °C) ⇒ Volkswagen Digital Cockpit Pro Information Displays,  
⇒ Volkswagen Digital Cockpit Basic Information Displays, ⇒ Analog Instrument Cluster Information  
Displays  
Start/Stop system active ⇒ Start-stop system  
19  
Start/Stop system not available ⇒ Start-stop system  
Economical driving condition ⇒ Analog Instrument Cluster Information Displays  
Service due ⇒ Service interval display  
Semi-automated driving assistance (Travel Assist) active, Adaptive Cruise Control active, adaptive lane  
guidance inactive ⇒  
Introduction  
High beam assistance active ⇒ Switching on high beam assistance  
Take over the steering ⇒ Take over the steering  
Autonomous Emergency Braking (Front Assist) starts ⇒ Autonomous Emergency Braking starts  
Distance warning ⇒ Warning levels and braking support  
Cruise control switched on ⇒  
Introduction  
Cruise control system malfunction ⇒ Cruise control system malfunction  
Adaptive Cruise Control (ACC) regulates, no vehicle driving ahead is detected ⇒ Switching ACC on and off  
Adaptive Cruise Control (ACC) regulates, vehicle driving ahead is detected ⇒ Switching ACC on and off  
Offroad driving profile ⇒ Driving mode properties  
Eco driving mode ⇒ Driving mode properties  
Normal driving mode ⇒ Driving mode properties  
Sport driving mode ⇒ Driving mode properties  
Individual driving mode ⇒ Driving mode properties  
Snow driving mode ⇒ Driving mode properties  
Offroad Custom driving profile ⇒ Driving mode properties  
20  
Mobile phone connected via Bluetooth® ⇒ Volkswagen Digital Cockpit Pro Information Displays,  
⇒ Volkswagen Digital Cockpit Basic Information Displays, ⇒ Analog Instrument Cluster Information  
Displays  
Mobile phone battery charge level ⇒ Volkswagen Digital Cockpit Pro Information Displays, ⇒ Volkswagen  
Digital Cockpit Basic Information Displays, ⇒ Analog Instrument Cluster Information Displays  
Note about information in the Owner's Manual ⇒ Note about information in the Owner's Manual  
Rear seat information muted ⇒ Parking  
Warning and information texts  
The status of some functions inside the vehicle and vehicle components are checked when the ignition is switched on or while  
driving. Malfunctions are indicated by red and yellow warning symbols in the instrument cluster display and may also be  
signaled audibly in some cases. The appearance of texts and symbols may vary depending on the instrument cluster version.  
Any malfunctions currently occurring can also be manually called up. To do this, open the Vehicle status or Vehicle menu  
⇒ Vehicle settings menu.  
Priority 1 warning message  
The red central warning light flashes or comes on, in some cases together with warning tones or additional symbols.  
Do  
not continue driving! There is a hazard. Check the malfunction. Contact an authorized Volkswagen dealer or authorized  
Volkswagen Service Facility immediately for assistance.  
Priority 2 warning message  
The yellow central warning light flashes or comes on, in some cases together with warning tones or additional symbols.  
Malfunctions or insufficient operating fluids can cause vehicle damage and vehicle malfunctions. Check the malfunction as  
soon as possible. Immediately contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility to have  
the system checked. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen  
Service Facility.  
Note about information in the Owner's Manual  
You can find more information about the existing warning message in the Owner's Manual.  
Informational text  
Information about various processes in the vehicle.  
If there are multiple warning messages, the symbols will appear consecutively for several seconds. The symbols will  
appear until the malfunction is corrected.  
If warning messages about malfunctions appear when the ignition is switched on, settings or information displays may not  
appear as described. If the malfunction persists, contact a suitably qualified professional. Volkswagen recommends  
contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
21  
Introduction to the instrument cluster  
The vehicle may be equipped either with an analog instrument cluster or a Volkswagen Digital Cockpit. The instrument cluster  
shows essential information, such as speed.  
In addition, the following functions, among others, are available depending on the equipment:  
Various menus, such as for the driver assistance systems.  
Status displays for the driver assistance systems.  
Display messages.  
Warning and indicator lights.  
Information about economy and range.  
Content can be individually adapted and settings can be changed in the menus.  
WARNING  
Operating the Volkswagen Digital Cockpit and Infotainment system can distract you from traffic. If the driver is distracted  
while driving, accidents and serious or fatal injuries can occur.  
Always drive attentively and responsibly.  
Never operate the instrument cluster while driving.  
Only adjust any settings in the instrument cluster or Infotainment system when the vehicle is stationary.  
WARNING  
If there is a serious fault in the instrument cluster, the display may be turned off. The warning light  
may also come on  
here. No further warnings can be displayed. This may result in vehicle breakdowns while driving, accidents and serious or  
fatal injuries.  
Safely stop the vehicle.  
See an authorized Volkswagen dealer or authorized Volkswagen Service Facility for assistance.  
After starting the engine when the 12 V vehicle battery is severely drained or when it has been replaced or jump-started,  
the system settings, e.g. personal convenience settings and programming, and user profiles may be changed or erased.  
Check and correct the settings after the 12 V vehicle battery is sufficiently recharged.  
Volkswagen Digital Cockpit Pro  
Overview of the Volkswagen Digital Cockpit Pro  
The Volkswagen Digital Cockpit Pro is a digital instrument cluster with a high-resolution TFT color display. By selecting  
different information profiles, other displays can be shown in addition to the standard dials, such as the tachometer. The term  
Volkswagen Digital Cockpit Pro is used to refer to the “Pro digital instrument cluster” in the following.  
22  
Fig. 9 In the instrument panel: Volkswagen Digital Cockpit Pro (general example).  
Tachometer (RPM of the running engine).  
Currently engaged gear or selector lever level ⇒ Driving.  
Displays ⇒ Operating the Volkswagen Digital Cockpit Pro.  
Speedometer.  
Digital speed display.  
Operating the Volkswagen Digital Cockpit Pro  
Fig. 10 Right side of the multi-function steering wheel: Operating the Volkswagen Digital Cockpit Pro (variant 1).  
23  
Fig. 11 Right side of the multi-function steering wheel: Operating the Volkswagen Digital Cockpit Pro (variant 2).  
Fig. 12 On the right side of the steering column: buttons on the windshield wiper lever.  
Vehicles with a multi-function steering wheel do not have buttons on the windshield wiper lever. The Volkswagen Digital  
Cockpit Pro is then exclusively operated via the buttons on the multi-function steering wheel. The functions of buttons on the  
multi-function steering wheel vary depending on the vehicle equipment.  
Vehicles with multi-function steering wheel: Menus cannot be opened when a priority 1 warning message is displayed  
24  
→ page , Warning and information texts. You can confirm and hide some messages using the  
function steering wheel fig. 10, fig. 11.  
button on the multi-  
Vehicles without multi-function steering wheel: Menus cannot be opened when a priority 1 warning message is displayed  
→ page , Warning and information texts. You can confirm and hide some messages using the  
fig. 12 button.  
Selecting a menu or information display  
Vehicles with multi-function steering wheel:  
1. Switch the ignition on.  
2. If a message or vehicle icon is displayed, press the  
button, repeatedly if necessary.  
or button.  
button on the windshield wiper lever or wait until  
3. To display a menu and to scroll through the menu, press the  
4. To open the displayed menu or the information display, press the  
the menu or information display opens automatically after a few seconds.  
Vehicles without multi-function steering wheel:  
1. Switch the ignition on.  
2. If a message or vehicle icon is displayed, press the  
button fig. 12, repeatedly if necessary.  
3. To go to the menu selection or to return to the menu selection from a menu or information display, press and hold the  
rocker switch fig. 12.  
4. To scroll through the menus, press the rocker switch upward or downward.  
5. To open the displayed menu or the information display, press the  
information display opens automatically after a few seconds.  
fig. 12 button or wait until the menu or  
Applying settings in the menus  
Vehicles with multi-function steering wheel:  
1. Press the  
or  
arrow button in the displayed menu until the preferred menu item is highlighted.  
The item is marked with a frame around it.  
2. Press the  
A check mark  
button to apply the desired changes.  
indicates that the respective function is switched on.  
3. To return to the menu selection, press the  
or  
button.  
Vehicles without multi-function steering wheel:  
1. In the displayed menu, press the rocker switch fig. 12 upwards or downwards until the desired menu item is marked.  
The item is marked with a frame around it.  
2. Press the  
A check mark  
button fig. 12 to apply the desired changes.  
indicates that the respective function is switched on.  
3. Select the Back menu item or press and hold the fig. 12 rocker switch.  
VIEW button on multi-function steering wheel  
You can use the  
button to switch between the classic display of dials, the large platform without information profiles,  
and the enhanced view with highlighted information profiles. The classic display shows the large dials on the right and left side  
and the selected information profile is displayed in the center.  
1. Press and hold the  
button to select from the preset information profiles in the list:  
Classic View without information profiles.  
Automatic The information profiles adjust to the selected driving mode. Only for vehicles with Driving Mode Selection.  
Preset 1 Individual selection of information profiles  
25  
Preset 2 Individual selection of information profiles  
Preset 3 Only on vehicles with standard factory-installed navigation system.  
Navigation map in the Volkswagen Digital Cockpit Pro  
Depending on the vehicle equipment, the Volkswagen Digital Cockpit Pro may display a detailed navigation map.  
The navigation map can be displayed in three sizes. With the larger map view, the navigation map is shown across the entire  
display. To select the desired map size, proceed as follows:  
1. Select menu item Navigation.  
2. Press the  
3. Press the  
button on the multi-function steering wheel to switch between the map sizes.  
arrow buttons on the multi-function steering wheel to zoom in or out.  
or  
4. When zooming manually, press the  
button on the multi-function steering wheel to switch to auto-zoom.  
Depending on the equipment, navigation will be shown on two screens or only on one screen. The navigation map may  
appear in the Volkswagen Digital Cockpit Pro and in the Infotainment system or just in the Infotainment system. If the  
navigation map is shown in the Infotainment system, only navigation arrows are shown in the Volkswagen Digital Cockpit.  
If warning messages about malfunctions appear when the ignition is switched on, settings or information displays may not  
appear as described. If the malfunction persists, contact a suitably qualified professional. Volkswagen recommends  
contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
WARNING  
Operating the Volkswagen Digital Cockpit and Infotainment system can distract you from traffic. If the driver is distracted  
while driving, accidents and serious or fatal injuries can occur.  
Always drive attentively and responsibly.  
Never operate the instrument cluster while driving.  
Only adjust any settings in the instrument cluster or Infotainment system when the vehicle is stationary.  
Volkswagen Digital Cockpit Pro Information Displays  
Information profiles  
Using the Digital Cockpit menu item in the vehicle Infotainment system vehicle settings, you can select different, topic-specific  
information profiles ⇒ Vehicle settings menu. Depending on the selected information profile, the Volkswagen Digital Cockpit  
Pro may show additional information in the center of the dials or the dials may be hidden and the additional information shown  
across the entire display. The following information profiles can be selected:  
Audio. Digital display of the current audio playback  
Acceleration Graphic display of the longitudinal and lateral acceleration  
Comfort drive Travel Assist. Visual display of various driver assistance systems ⇒ Driver assistance systems.  
Distance Display of the distance driven.  
Gear indicator Display of the current gear or the selected gear.  
Speed Display of the speed.  
Elevation Display of the current elevation above sea level.  
Compass Digital compass display  
Navigation Graphic display of arrow navigation  
26  
Range. Display of the range.  
Consumption Graphic display of the current consumption and the digital display of the average consumption  
Traffic sign recognition Display of detected traffic signs.  
Destination arrival information. Display of remaining driving time, the distance to the destination, and the estimated  
arrival time.  
Depending on the equipment, the number and scope of the information profiles that can be selected may vary.  
Possible displays in the Volkswagen Digital Cockpit Pro  
Depending on the vehicle equipment, different information may be shown in the Volkswagen Digital Cockpit Pro:  
Outside temperature display.  
Detected road sign from the traffic sign recognition.  
Driver assistance systems.  
Driving data menu and menus for various settings.  
Gear recommendation ⇒ Gear recommendation.  
Speed warnings.  
Speed warning for winter tires.  
Open doors, hood and trunk lid.  
Infotainment system and navigation information.  
Odometer displays.  
Compass display.  
Radiator fan run-on.  
Engine code ().  
Service interval display.  
Status display for the start-stop system ⇒ Start/Stop system.  
Phone information.  
Time.  
Selector lever position.  
Warning and information texts.  
Warning and indicator lights ⇒ Symbols in the instrument cluster.  
Outside temperature display  
When outside temperatures are colder than approximately +4°C (+39°F), a snowflake symbol also appears on the outside  
temperature display  
. This symbol remains on until the outside temperature rises above +6 °C (+43 °F).  
In the following situations, the temperature displayed may be higher than the actual outside temperature due to heat radiating  
from the engine:  
When the vehicle is stationary  
When the driving speed is very low  
The measurement range is from -45 °C (-49 °F) to +76 °C (+169 °F)  
WARNING  
27  
Roads may be icy when outside temperatures are low, even if they are above the freezing point. There is an increased  
risk of an accident on icy roads. This could result in serious or fatal injuries.  
If the  
symbol is displayed in the instrument cluster display, drive with extra caution.  
Always adapt your speed and driving style to the visibility, weather, road and traffic conditions.  
Never rely solely on the outside temperature display.  
Gear recommendation  
A recommendation to select a fuel-saving gear may be displayed in the Volkswagen Digital Cockpit while driving ⇒ Gear  
recommendation.  
Open doors, hood and trunk lid  
If, after unlocking the vehicle and while driving, any doors and/or the hood or trunk lid are open, this is displayed in the  
Volkswagen Digital Cockpit and an audible signal may also sound.  
Speed warning for winter tires  
If the set maximum speed is exceeded, this will be shown in the digital instrument cluster.  
Settings for the speed warning can be adjusted in the vehicle settings in the Infotainment system ⇒ Winter tires.  
Compass display  
When the ignition is switched on, the instrument cluster display shows an abbreviation to indicate the direction the vehicle is  
currently traveling, for example “NW” for northwest.  
If the Infotainment system is switched on and route guidance is not active, the graphic display of a compass is also available.  
Odometer displays  
The odometer registers the total distance that the vehicle has driven.  
The trip trip odometer shows the miles that were driven since the trip odometer was last reset.  
1. Reset the odometer via the Infotainment system or the service menu ⇒ Service menu.  
Radiator fan run-on  
This indicator appears after the ignition has been switched off, if the radiator fan continues to run.  
The radiator fan may continue running due to:  
Exhaust gas post-treatment, through particulate filter regeneration, for example.  
Active brake cooling after descent.  
Dissipation of engine heat after high load, e.g. trailer mode.  
Engine code  
1. Open the service menu ⇒ Service menu.  
2. Select the Engine code menu item.  
Phone information  
If a cell phone is connected via Bluetooth, the Bluetooth symbol  
The symbol also indicates the charge level of the mobile device.  
will be displayed in the Volkswagen Digital Cockpit.  
Selector lever position  
28  
The selector lever position that is engaged is shown on the left side of the selector lever and in the Volkswagen Digital  
Cockpit.  
If necessary, the respective gear is displayed in the Volkswagen Digital Cockpit when in the D/S selector lever position and  
when in tiptronic mode ⇒ Selector lever.  
Suitably qualified professionals can program or modify additional functions depending on the vehicle equipment.  
Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
There are different instrument clusters; therefore the versions and appearances of the displays may vary. Malfunctions will  
only be indicated by indicator lights if the display does not have warning or information texts.  
Some displays in the Volkswagen Digital Cockpit may be hidden due to events that occur suddenly, e.g. incoming phone  
calls.  
Depending on the equipment, some settings and displays may also appear in the Infotainment system.  
Volkswagen Digital Cockpit Basic  
Overview of the Volkswagen Digital Cockpit Basic  
The Digital Cockpit is a digital instrument cluster with a high-resolution TFT color display. By selecting different views, e.g.  
tachometer, and different displays in the main display area and in the secondary display areas, further content can be shown.  
The term “Volkswagen Digital Cockpit” is used to refer to the digital instrument cluster in the following.  
Fig. 13 In the instrument panel: Volkswagen Digital Cockpit Basic (general example).  
Secondary display area.  
Time, compass and temperature.  
Main display area.  
Secondary display area.  
Currently engaged gear or selector lever level.  
Active driver assistance.  
Range.  
Coolant temperature gauge.  
Fuel gauge.  
Operating the Volkswagen Digital Cockpit Basic  
29  
Fig. 14 Right side of the multi-function steering wheel: Operating the Volkswagen Digital Cockpit Basic (variant 1).  
30  
Fig. 15 Right side of the multi-function steering wheel: Operating the Volkswagen Digital Cockpit Basic (variant 2).  
Fig. 16 On the right side of the steering column: buttons on the windshield wiper lever.  
Vehicles with a multi-function steering wheel do not have buttons on the windshield wiper lever. The Volkswagen Digital  
Cockpit Basic is then exclusively operated via the buttons on the multi-function steering wheel. The functions of buttons on the  
multi-function steering wheel vary depending on the vehicle equipment.  
Vehicles with multi-function steering wheel: Menus cannot be opened when a priority 1 warning message is displayed  
31  
→ page , Warning and information texts. You can confirm and hide some messages using the  
function steering wheel fig. 14, fig. 15.  
button on the multi-  
Vehicles without multi-function steering wheel: Menus cannot be opened when a priority 1 warning message is displayed  
→ page , Warning and information texts. You can confirm and hide some messages using the  
fig. 16 button.  
Views in the main display area  
1. Vehicles with multi-function steering wheel: Press the  
The following views can be shown in the display area:  
Digital view Digital speedometer with secondary displays.  
button to switch the main display.  
Speed  
Classic display of the speedometer as a dial.  
Tachometer Classic display of the tachometer as a dial.  
Depending on the vehicle equipment, the amount of information shown and the scope thereof may vary.  
After switching off the ignition, a display is shown with information on the vehicle status, e.g. total mileage.  
In the speed and tachometer views, an additional secondary display can be configured in the center of the dial.  
Selecting secondary displays  
Vehicles with multi-function steering wheel: The secondary displays can be configured or hidden independently of each other.  
Various driving data, navigation information or information about audio playback or phone interfaces can be shown on the  
secondary displays. To select the secondary displays, proceed as follows:  
1. Select the right or left secondary display area using the  
2. Select the preferred secondary display using the and  
or  
buttons.  
arrow buttons.  
3. Confirm your selection with the  
button.  
Selecting secondary displays in the dial  
Vehicles with multi-function steering wheel:  
1. Select the preferred secondary display using the  
and  
arrow buttons.  
2. Confirm your selection with the  
button.  
Vehicles without multi-function steering wheel:  
1. To open the secondary displays, press the rocker switch fig. 16 upward or downward.  
2. To scroll through the menus, press the rocker switch fig. 16 upward or downward.  
3. Press the  
button fig. 16 to confirm the selected secondary display.  
If warning messages about malfunctions appear when the ignition is switched on, settings or information displays may not  
appear as described. If the malfunction persists, contact a suitably qualified professional. Volkswagen recommends  
contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
WARNING  
Operating the Volkswagen Digital Cockpit and Infotainment system can distract you from traffic. If the driver is distracted  
while driving, accidents and serious or fatal injuries can occur.  
Always drive attentively and responsibly.  
Never operate the instrument cluster while driving.  
Only adjust any settings in the instrument cluster or Infotainment system when the vehicle is stationary.  
32  
Volkswagen Digital Cockpit Basic Information Displays  
Possible displays  
Depending on the vehicle equipment, different information may be shown in the main display and secondary display areas of  
the Volkswagen Digital Cockpit Basic:  
Outside temperature display.  
Time and date.  
Digital speed.  
Detected road sign from the traffic sign recognition.  
Driver assistance systems.  
Driving data menu, e.g. Travel time/distance driven.  
Gear recommendation ⇒ Gear recommendation.  
Speed warning for winter tires.  
Open doors, hood and trunk lid.  
Odometer displays.  
Compass display.  
Radiator fan run-on.  
Engine code ().  
Navigation information.  
Engine oil temperature.  
Radio information.  
Service interval display.  
Status display for the start-stop system ⇒ Start/Stop system.  
Phone information.  
Selector lever position.  
Warning and information texts.  
Warning and indicator lights.  
Destination information.  
You can adjust further settings in the submenu.  
Outside temperature display  
When outside temperatures are colder than approximately +4°C (+39°F), a snowflake symbol also appears on the outside  
temperature display  
. This symbol remains on until the outside temperature rises above +6 °C (+43 °F).  
In the following situations, the temperature displayed may be higher than the actual outside temperature due to heat radiating  
from the engine:  
When the vehicle is stationary  
When the driving speed is very low  
The measurement range is from -45 °C (-49 °F) to +76 °C (+169 °F)  
33  
WARNING  
Roads may be icy when outside temperatures are low, even if they are above the freezing point. There is an increased  
risk of an accident on icy roads. This could result in serious or fatal injuries.  
If the  
symbol is displayed in the instrument cluster display, drive with extra caution.  
Always adapt your speed and driving style to the visibility, weather, road and traffic conditions.  
Never rely solely on the outside temperature display.  
Gear recommendation  
A recommendation to select a fuel-saving gear may be displayed in the Volkswagen Digital Cockpit while driving ⇒ Gear  
recommendation.  
Open doors, hood and trunk lid  
If, after unlocking the vehicle and while driving, any doors and/or the hood or trunk lid are open, this is displayed in the  
Volkswagen Digital Cockpit and an audible signal may also sound.  
Speed warning for winter tires  
If the set maximum speed is exceeded, this will be shown in the digital instrument cluster.  
Settings for the speed warning can be adjusted in the vehicle settings in the Infotainment system ⇒ Winter tires.  
Compass display  
If the Compass secondary display is activated, the direction in which you are currently driving is shown as a blue arrow with a  
depiction of the vehicle and a compass.  
Radiator fan run-on  
This indicator appears after the ignition has been switched off, if the radiator fan continues to run.  
The radiator fan may continue running due to:  
Exhaust gas post-treatment, through particulate filter regeneration, for example.  
Active brake cooling after descent.  
Dissipation of engine heat after high load, e.g. trailer mode.  
Engine code (EC)  
1. Open the service menu ⇒ Service menu.  
2. Select the Engine code menu item.  
Navigation information  
When route guidance is activated, the Navigation instruction auxiliary display shows the direction of travel as an arrow.  
An arrow behind the entry in the configuration menu indicates a submenu.  
The submenu lists your home address and a list of your most recent destinations. Route guidance can be started with the  
button.  
Phone information  
If the Phone secondary display is activated and a cell phone is connected via Bluetooth, the Bluetooth symbol  
displayed in the Volkswagen Digital Cockpit. The symbol also indicates the charge level of the mobile device.  
will be  
34  
In the submenu, a list of the most recent phone calls is shown and you have the option to call the displayed contacts back.  
Selector lever position for automatic transmission  
The selector lever position and, depending on the driving mode, the gear that is engaged, are shown on the selector lever and  
in the Volkswagen Digital Cockpit. The gear shift pattern is displayed when the brake or the selector lever in the instrument  
cluster are actuated.  
Destination information  
When route guidance is activated, the Destination information secondary display shows the predicted journey time and  
distance from the destination.  
Some displays in the Volkswagen Digital Cockpit may be hidden due to events that occur suddenly, e.g. incoming phone  
calls.  
Depending on the equipment, some settings and displays may also appear in the Infotainment system.  
Analog instrument cluster  
Overview of the analog instrument cluster  
Fig. 17 In the instrument panel: analog instrument cluster (general example).  
Speedometer.  
Tachometer (RPM of the running engine).  
Displays ⇒ Analog instrument cluster, ⇒ Analog Instrument Cluster Information Displays.  
Reset, set, and display button.  
Fuel gauge.  
Coolant temperature gauge.  
Operating the analog instrument cluster  
35  
Fig. 18 Right side of the multi-function steering wheel: Operating the analog instrument cluster (variant 1).  
36  
Fig. 19 Right side of the multi-function steering wheel: Operating the analog instrument cluster (variant 2).  
Fig. 20 On the right side of the steering column: buttons on the windshield wiper lever.  
Vehicles with multi-function steering wheel:  
Menus cannot be opened when a priority 1 warning message is displayed → page , Warning and information texts. You can  
confirm and hide some messages using the  
fig. 18, fig. 19 button on the multi-function steering wheel.  
Vehicles without multi-function steering wheel:  
37  
Menus cannot be opened when a priority 1 warning message is displayed → page , Warning and information texts. You can  
confirm and hide some messages using the  
fig. 20 button.  
Selecting a menu or information display  
Vehicles with multi-function steering wheel:  
1. Switch the ignition on.  
2. If a message or vehicle icon is displayed, press the  
button, repeatedly if necessary.  
3. To display a menu and to scroll through the menu, press the  
or  
button.  
4. To open the displayed menu or the information display, press the  
button on the windshield wiper lever or wait until  
the menu or information display opens automatically after a few seconds.  
Vehicles without multi-function steering wheel:  
1. Switch the ignition on.  
2. If a message or vehicle icon is displayed, press the  
necessary.  
fig. 20 button on the windshield wiper lever, repeatedly if  
3. To display the menus ⇒ Driving data menu or to return to the menu selection from a menu or information display, press  
and hold the rocker switch fig. 20 on the windshield wiper lever.  
4. To scroll through the menus, press the rocker switch  
fig. 20 on the windshield wiper lever upward or downward.  
fig. 20 button on the windshield wiper leve  
5. To open the displayed menu or the information display, press the  
or wait until the menu or information display opens automatically after a few seconds.  
Applying settings in the menus  
Vehicles with multi-function steering wheel:  
1. Press the  
and  
arrow buttons in the displayed menu until the preferred menu item is marked.  
The item is marked with a frame around it.  
2. Confirm your selection using the button.  
indicates that the respective function is switched on.  
A check mark  
Vehicles without multi-function steering wheel:  
1. In the displayed menu, press the rocker switch  
fig. 20 on the windshield wiper lever upwards or downwards unti  
the preferred menu item is highlighted.  
The item is marked with a frame around it.  
2. Press the  
A check mark  
button on the windshield wiper lever fig. 20 to apply the preferred changes.  
indicates that the respective function is switched on.  
Returning to menu selection  
Vehicles with multi-function steering wheel:  
1. Press the  
or  
button.  
Vehicles without multi-function steering wheel:  
1. Select the Back menu item.  
VIEW button on multi-function steering wheel  
Vehicles with multi-function steering wheel:  
You can use the  
button to switch between the different views in the display area.  
Odometer displays  
The odometer registers the total distance that the vehicle has driven.  
38  
The trip trip odometer shows the miles that were driven since the trip odometer was last reset.  
1. To reset the trip odometer to zero, press the  
button in the analog instrument cluster briefly.  
Engine code (EC)  
1. Switch the ignition on.  
2. To display the engine code, press and hold the  
button in the analog instrument cluster for about 15 seconds.  
If warning messages about malfunctions appear when the ignition is switched on, settings or information displays may not  
appear as described. If the malfunction persists, contact a suitably qualified professional. Volkswagen recommends  
contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
WARNING  
If the driver is distracted while driving, accidents and serious injuries can occur. Operating the instrument cluster can  
distract you from traffic.  
Always drive attentively and responsibly.  
Never operate the instrument cluster while driving.  
Analog Instrument Cluster Information Displays  
Depending on the vehicle equipment, different information may be shown in the analog instrument cluster:  
Outside temperature display.  
Detected road sign from the traffic sign recognition.  
Driver assistance systems.  
Driving data menu and menus for various settings.  
Gear recommendation ⇒ Gear recommendation.  
Speed warnings.  
Speed warning for winter tires.  
Open doors, hood and trunk lid.  
Infotainment system and navigation information.  
Odometer displays.  
Compass display.  
Radiator fan run-on.  
Engine code ().  
Service interval display.  
Status display for the start-stop system ⇒ Start/Stop system.  
Phone information.  
Time.  
Depending on the vehicle equipment: Fuel-efficient driving  
. Status display for Active Cylinder Management (ACT )  
⇒ Eco tips.  
Selector lever position.  
Warning and information texts.  
39  
Warning and indicator lights ⇒ Symbols in the instrument cluster.  
Suitably qualified professionals can program or modify additional functions depending on the vehicle equipment.  
Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Outside temperature display  
When outside temperatures are colder than approximately +4 °C (+39 °F), a snowflake symbol also appears on the outside  
temperature display  
. This symbol remains on until the outside temperature rises above +6 °C (+43 °F).  
In the following situations, the temperature displayed may be higher than the actual outside temperature due to heat radiating  
from the engine:  
When the vehicle is stationary  
When the driving speed is very low  
The measurement range is from -45 °C (-49 °F) to +76 °C (+169 °F)  
WARNING  
Roads may be icy when outside temperatures are low, even if they are above the freezing point. There is an increased  
risk of an accident on icy roads. This could result in serious or fatal injuries.  
If the  
symbol is displayed in the instrument cluster display, drive with extra caution.  
Always adapt your speed and driving style to the visibility, weather, road and traffic conditions.  
Never rely solely on the outside temperature display.  
Gear recommendation  
A recommendation to select a fuel-saving gear may be displayed in the analog instrument cluster while driving ⇒ Gear  
recommendation.  
Open doors, hood and trunk lid  
If, after unlocking the vehicle and while driving, any doors and/or the hood or trunk lid are open, this is displayed in the analog  
instrument cluster and an audible signal may also sound.  
Speed warning for winter tires  
If the set maximum speed is exceeded, this will be shown in the analog instrument cluster.  
Settings for the speed warning can be adjusted in the vehicle settings in the Infotainment system ⇒ Winter tires.  
Compass display  
When the ignition is switched on, the instrument cluster display shows an abbreviation to indicate the direction the vehicle is  
currently traveling, for example “NW” for northwest.  
If the Infotainment system is switched on and route guidance is not active, the graphic display of a compass is also available.  
Odometer displays  
The odometer registers the total distance that the vehicle has driven.  
The trip trip odometer shows the miles that were driven since the trip odometer was last reset.  
1. Reset the odometer via the Infotainment system or the service menu ⇒ Service menu.  
Radiator fan run-on  
40  
This indicator appears after the ignition has been switched off, if the radiator fan continues to run.  
The radiator fan may continue running due to:  
Exhaust gas post-treatment, through particulate filter regeneration, for example.  
Active brake cooling after descent.  
Dissipation of engine heat after high load, e.g. trailer mode.  
Engine code  
1. Open the service menu ⇒ Service menu.  
2. Select the Engine code menu item.  
Phone information  
If a cell phone is connected via Bluetooth, the Bluetooth symbol  
The symbol also indicates the charge level of the mobile device.  
will be displayed in the analog instrument cluster.  
Selector lever position  
The selector lever position that is engaged is shown on the side of the selector lever and in the analog instrument cluster.  
If necessary, the respective gear is displayed in the analog instrument cluster when in the D/S selector lever position and whe  
in tiptronic mode ⇒ Selector lever.  
Fuel-efficient driving  
If the vehicle is driving in a fuel-efficient manner, this will be indicated in the analog instrument cluster while driving  
.
There are different instrument clusters; therefore the versions and appearances of the displays may vary. Malfunctions will  
only be indicated by indicator lights if the display does not have warning or information texts.  
Some displays in the analog instrument cluster may be hidden due to events that occur suddenly, e.g. incoming phone  
calls.  
Depending on the equipment, some settings and displays may also appear in the Infotainment system.  
Tachometer  
The start of the red area on the tachometer indicates the maximum permissible engine speed for all gears when the engine is  
run in and at operating temperature.  
Before reaching the red area, shift to the next highest gear, select the selector lever position D/S or take your foot off the  
accelerator pedal.  
NOTICE  
A heavy engine load, especially when the engine is cold, can lead to engine damage.  
Avoid high engine speeds, full acceleration and heavy engine loads when the engine is cold.  
To prevent engine damage, the tachometer indicator may only be in the red area of the scale briefly.  
Shifting up early helps save fuel and reduce operating noises.  
41  
Fuel gauge  
Digital fuel gauge  
Fig. 21 In the Volkswagen Digital Cockpit Pro: fuel gauge (general example).  
Fig. 22 In the Volkswagen Digital Cockpit Basic: fuel gauge (general example).  
WARNING  
If the fuel level is too low, this can result in irregular fuel supply and cause the engine to “sputter” or cut out, particularly  
when traveling uphill or downhill. This may result in vehicle breakdowns while driving, accidents and serious or fatal  
injuries. The steering, all driver assistance systems and brake support systems will not work if the engine cuts out due to  
fuel shortage or irregular fuel supply.  
42  
Check that the fuel tank is always sufficiently filled.  
Always refill the fuel when the fuel tank is only 1/4 full.  
NOTICE  
Irregular fuel supply can result in misfiring and unburnt fuel entering the exhaust system.  
Never drive with a completely empty fuel tank.  
The small arrow next to the fuel pump symbol on the fuel gauge indicates which side of the vehicle the fuel filler flap is on.  
Analog fuel gauge  
Fig. 23 In the analog instrument cluster: fuel gauge (general example).  
WARNING  
If the fuel level is too low, this can result in irregular fuel supply and cause the engine to “sputter” or cut out, particularly  
when traveling uphill or downhill. This may result in vehicle breakdowns while driving, accidents and serious or fatal  
injuries. The steering, all driver assistance systems and brake support systems will not work if the engine cuts out due to  
fuel shortage or irregular fuel supply.  
Check that the fuel tank is always sufficiently filled.  
Always refill the fuel when the fuel tank is only 1/4 full.  
NOTICE  
Irregular fuel supply can result in misfiring and unburnt fuel entering the exhaust system.  
43  
Never drive with a completely empty fuel tank.  
The small arrow next to the fuel pump symbol on the fuel gauge indicates which side of the vehicle the fuel filler flap is on.  
Troubleshooting  
Fuel tank almost empty  
The yellow indicator light turns on. The reserve supply (red marking ) is being used.  
1. Refuel at the next opportunity.  
Fuel tank cap open  
The yellow indicator light turns on.  
1. Close the fuel tank cap.  
Engine coolant temperature gauge  
Digital coolant temperature gauge  
Fig. 24 In the Volkswagen Digital Cockpit Pro: coolant temperature gauge (general example).  
Cold range. The engine is not at operating temperature yet. Avoid high engine RPMs and heavy engine load when the  
engine is not at operating temperature.  
Normal range.  
Warning range. The needle may move into the warning range when engine load is heavy, especially when outside  
temperatures are high.  
44  
Fig. 25 In the Volkswagen Digital Cockpit Basic: coolant temperature gauge (general example).  
Cold range. The engine is not at operating temperature yet. Avoid high engine RPMs and heavy engine load when the  
engine is not at operating temperature.  
Normal range.  
Warning range. The needle may move into the warning range when engine load is heavy, especially when outside  
temperatures are high.  
If the  
warning light flashes, the coolant temperature is too high or the coolant level is too low ⇒ Troubleshooting.  
Analog coolant temperature gauge  
Fig. 26 In analog instrument cluster: coolant temperature gauge (general example).  
Cold range. The engine is not at operating temperature yet. Avoid high engine RPMs and heavy engine load when the  
engine is not at operating temperature.  
Normal range.  
Warning range. The needle may move into the warning range when engine load is heavy, especially when outside  
45  
temperatures are high.  
If the warning light flashes, the coolant temperature is too high or the coolant level is too low ⇒ Troubleshooting.  
Driving data menu  
The driving data menu shows driving and consumption data. Depending on the vehicle equipment, various driving data can be  
displayed. The displayed driving data is dependent on the current driving style, the vehicle status, e.g. particle filter  
regeneration, and the current driving situation, e.g. city traffic. The driving data is determined as an average value over  
sections of different distances and the currently displayed value may therefore differ from the actual average value.  
Since start memory  
If the trip is interrupted for more than two hours, the memory is erased.  
Since refuel memory  
Display and memory of the collective driving and consumption data. The memory is erased when the vehicle is refueled.  
Extended period memory  
The memory collects the driving data up to 19 hours and 59 minutes or 99 hours and 59 minutes driving time or 1999.9 km  
(miles) or 9999.9 km (miles) distance driven. If one of these maximum thresholds is met, the memory is erased. The  
maximum thresholds may vary depending on the version of the instrument cluster.  
Volkswagen Digital Cockpit Pro and Analog Instrument Cluster Driving Data Menu  
The driving data is available in the context menu of the Volkswagen Digital Cockpit Pro.  
Switching Between the Displays in the Volkswagen Digital Cockpit Pro and the Analog Instrument Cluster  
Vehicles with multi-function steering wheel:  
1. Press the  
or  
button on the multi-function steering wheel.  
Vehicles without multi-function steering wheel:  
1. Press the TRIP rocker switch on the windshield wiper lever.  
Switching Between the Memories in the Volkswagen Digital Cockpit Pro and the Analog Instrument Cluster  
Vehicles with multi-function steering wheel:  
1. Press the  
button on the multi-function steering wheel.  
Vehicles without multi-function steering wheel:  
1. Press the  
button on the windshield wiper lever.  
Deleting the Driving Data Memories in the Volkswagen Digital Cockpit Pro and the Analog Instrument Cluster  
Vehicles with multi-function steering wheel:  
1. Select the memory to be erased.  
2. Press the  
button on the multi-function steering wheel.  
Vehicles without multi-function steering wheel:  
1. Select the memory to be erased.  
2. Press the  
button on the windshield wiper lever.  
If you would like to know how many kilometers are driven in the course of a day, clear the Long-term memory before you  
start driving and read it at the end of the day.  
Adjustable Speed Warning  
The following setting can be used to set an individual speed warning:  
Vehicles with multi-function steering wheel:  
1. Select the Warning at --- km/h or Warning at --- mph display.  
46  
2. Press the  
button on the multi-function steering wheel to save the current speed and to activate the warning.  
3. Set the speed on the multi-function steering wheel within approximately five seconds by pressing the  
buttons. Then press the button or wait several seconds.  
and  
arrow  
The speed will then be saved and the warning will be activated.  
4. Press the button again to deactivate.  
The stored speed is erased.  
Vehicles without multi-function steering wheel:  
1. Select the Warning at --- km/h or Warning at --- mph display.  
2. Press the  
button on the windshield wiper lever to save the current speed and to activate the warning.  
3. Set the desired speed within five seconds with the TRIP rocker switch on the windshield wiper lever. Then press the  
button or wait several seconds.  
The speed will then be saved and the warning will be activated.  
4. Press the  
button again to deactivate.  
The stored speed is erased.  
The warning can be set for speeds between 30 km/h (18 mph) and 250 km/h (155 mph).  
Depending on the country, a single warning tone sounds at speeds of over approximately 80 km/h (approximately 50 mph),  
and from approximately 120 km/h (approximately 75 mph), a continuous warning tone sounds. The  
be displayed in the instrument cluster display. This warning is required by law and cannot be altered.  
indicator light will also  
Volkswagen Digital Cockpit Basic Driving Data Menu  
The driving data is available in the secondary display area of the Volkswagen Digital Cockpit Basic.  
Selecting the Driving Data Menu in the Volkswagen Digital Cockpit Basic  
Vehicles with multi-function steering wheel:  
1. Select the right or left secondary display area using the  
2. Select your preferred driving data menu using the and  
3. Confirm your selection with the button.  
Vehicles without multi-function steering wheel:  
or  
buttons.  
arrow buttons.  
1. To open the secondary displays, press the rocker switch on the windshield wiper lever upward or downward.  
2. To scroll through the menus, press the rocker switch upward or downward.  
3. Press the  
button to confirm the selected driving data menu.  
Resetting the Driving Data Menu in the Volkswagen Digital Cockpit Basic  
Vehicles with multi-function steering wheel:  
1. Press the  
or  
button.  
2. Select the corresponding driving data menu in the configuration menu using the  
An arrow behind the entry in the configuration menu indicates a submenu.  
and  
arrow buttons.  
3. In the submenu, select Reset data and confirm by pressing the  
button.  
Vehicles without multi-function steering wheel:  
1. Press and hold the  
button.  
Driving Data in the Infotainment system  
Driving Data can be displayed in the Infotainment system, in addition to being displayed in the instrument cluster.  
47  
Selecting Displays in the Infotainment System  
You can select the driving data you would like to display using the vehicle settings in the Infotainment system ⇒ Vehicle  
settings menu.  
Consumption  
The average fuel consumption is displayed after approximately 300 m (approx. 984 ft).  
Range  
This indicates the approximate distance in km (miles) the vehicle can travel under the same driving conditions.  
Speed  
The average speed is displayed after approximately 100 m (approximately 328 ft).  
WARNING  
If the driver is distracted while driving, accidents and serious injuries can occur. Operating the Volkswagen Digital Cockpit  
and Infotainment system can distract you from traffic.  
Always drive attentively and responsibly.  
Never operate the instrument cluster while driving.  
Only adjust any settings in the instrument cluster or Infotainment system when the vehicle is stationary.  
Service  
Service menu  
Depending on the equipment, settings can be applied in the service menu.  
Opening the Service Menu in the Volkswagen Digital Cockpit Pro  
1. Select the Range information profile.  
2. Press and hold the  
button on the multifunction steering wheel for approximately four seconds.  
3. Navigate in the menu using the buttons on the multi-function steering wheel.  
Opening the Service Menu in the Volkswagen Digital Cockpit Basic  
1. Select the Travel time/distance driven secondary display.  
2. Press and hold the  
seconds.  
or  
button on the multi-function steering wheel in the same direction for approximately six  
3. Use the  
and  
arrow buttons to navigate the menu.  
Resetting the service interval display  
1. Select Service menu.  
2. Follow the instructions in the instrument cluster display.  
Resetting the oil change service  
1. Select Reset oil change service menu.  
2. Follow the instructions in the instrument cluster display.  
Resetting the Trip Odometer on the Volkswagen Digital Cockpit Pro  
1. Select Reset trip menu.  
48  
2. Follow the instructions in the instrument cluster display.  
Displaying the engine code  
1. Select Engine code menu.  
The engine code is shown on the instrument cluster display.  
Setting the time  
1. Select Time menu.  
2. Set the time with the  
and  
arrow buttons.  
Displaying copyright information  
1. Select the Copyright menu to access the copyright information.  
Service interval display  
Displays about service events appear in the instrument cluster display and in the Infotainment system. There are different  
versions of the instrument cluster and Infotainment system; therefore, the appearances of the displays may vary.  
Service appointments at Volkswagen are divided into oil change services and inspections. The service interval display informs  
the driver about the next service appointment which includes an engine oil change and about the next inspection.  
The service intervals are specified for vehicles with the fixed oil change service interval.  
Intervals are determined individually on vehicles with the flexible oil change service interval. Oil change services only need to  
be performed if the vehicle requires it. The specific operating conditions and the personal driving style are also taken into  
consideration. The service early warning message is first displayed 30 days prior to the calculated oil change service due  
date. The displayed remaining distance to be traveled is always rounded to 100 km (miles) and the remaining time is rounded  
to whole days.  
Service notification  
If an oil change service or an inspection service is due in the near future, a service notification will be displayed when the  
ignition is switched on.  
The specified mileage or time is the distance or time until the next service can be completed.  
Service event  
When an oil change service or an inspection service is due, a chime will sound when switching on the ignition and you can  
then see a wrench symbol  
Inspection now!  
for a few seconds in the instrument cluster display together with one of the following displays:  
Oil change now!  
Oil change service and inspection now!  
Checking a service due date in the Infotainment system  
When the ignition is on, the engine is off and the vehicle is stationary, the current service due date can be checked:  
Checking the service due date in the Infotainment system:  
1. Depending on the vehicle equipment, press the  
button or function key and select the Vehicle menu in the  
Infotainment system.  
Or: depending on the vehicle equipment, press the  
button or function key.  
2. Depending on how your vehicle is equipped, select the Settings menu.  
3. Select the Service menu item to display the service information.  
49  
Checking a Service Due Date in the Analog Instrument Cluster  
1. Press and hold the button in the instrument cluster until Service appears in the display.  
2. Release the  
button.  
The current service due date is shown in the display.  
Checking a Service Due Date in the Volkswagen Digital Cockpit Pro and Basic Versions  
When the ignition is on, the engine is off and the vehicle is stationary, the current service due date can be checked:  
1. Open the service menu ⇒ Service menu.  
Resetting the service interval display  
If the service interval display was not reset after the oil change service or inspection service, the display can be reset as  
follows:  
Vehicles with analog instrument cluster:  
1. Switch the ignition off.  
2. Press and hold the  
button in the instrument cluster.  
3. Switch the ignition back on.  
4. Release the  
button when one of the following messages appears in the instrument cluster display: Reset oil change  
service? or Reset inspection service?.  
5. Press the  
button in the instrument cluster to confirm.  
Vehicles with a digital instrument cluster: The service interval display can only be reset through the service menu ⇒ Service  
menu.  
Do not reset the service interval display between service intervals or incorrect information will be displayed.  
If the oil change service interval was manually reset, the service interval display then also switches to a fixed service interval,  
even on vehicles with the flexible oil change service interval.  
The service message automatically disappears after a few seconds when the engine is running or by pressing the  
button on the windshield wiper lever or the  
button on the multi-function steering wheel.  
If the 12 V vehicle battery in a vehicle with the flexible service interval has been disconnected for an extended period, the  
time for the next oil change service cannot be calculated. Therefore, the service interval displays may show incorrect  
calculations. If this is the case, follow the maximum permissible maintenance intervals.  
Time  
Setting the time in the Infotainment system  
1. Depending on the design, press the  
button or function key and open the Vehicle menu.  
button or function key.  
Or: depending on the vehicle equipment, press the  
2. Depending on how your vehicle is equipped, open the Settings menu.  
3. Select the Time and date menu item to set the time.  
Setting the Time in the Volkswagen Digital Cockpit Pro  
1. Select the Range information profile.  
2. Press and hold the  
button on the multi-function steering wheel until the service menu is available in the instrument  
cluster display ⇒ Service menu.  
3. Select Time menu.  
50  
4. Set the correct time using the  
or  
arrow buttons.  
Setting the Time in the Volkswagen Digital Cockpit Basic  
1. Open the service menu ⇒ Service menu.  
2. Select the Time menu.  
3. Set the correct time with the  
button.  
Setting the time in the analog instrument cluster  
1. To set all clocks in the vehicle, press and hold the  
button in the analog instrument cluster until Time appears in the  
instrument cluster display.  
2. Release the  
button.  
The time is displayed and the hour display is marked.  
3. Press the  
button as many times as required until the preferred hours are displayed.  
Press and hold the  
button to move through the numbers faster.  
After several seconds, the system automatically switches to minute display.  
4. Press the button as many times as required until the desired minutes are displayed.  
Press and hold the button to move through the numbers faster.  
5. Release the button to finish setting the time.  
Vehicle settings menu  
You can switch individual functions  
and systems on and off and adjust  
settings in the vehicle settings menu in  
the Infotainment system.  
Opening the Vehicle settings Menu  
1. Switch the ignition on.  
2. If necessary, switch on the Infotainment system.  
3. Depending on the equipment, press the  
Or: depending on the design, press the  
button or function key and select the Vehicle menu.  
button or function key and select the Settings menu.  
Or: Tap the  
function key and select the Car menu.  
4. To open other menus in the Vehicle settings menu or to adjust settings to the menu items, tap the  
select the relevant function keys.  
function key and  
5. Tap the  
function key to return to the previous menu.  
A check mark  
indicates that the respective function is switched on.  
System settings and vehicle information display  
Vehicle settings (setup)  
Depending on vehicle equipment: Performance monitor.  
Depending on vehicle equipment: Lap timer.  
Off-road display ⇒ Offroad display.  
Volkswagen Digital Cockpit (Pro) ⇒ Volkswagen Digital Cockpit Pro, ⇒ Volkswagen Digital Cockpit Pro Information  
Displays.  
51  
Volkswagen Digital Cockpit (Basic) ⇒ Volkswagen Digital Cockpit Basic, ⇒ Volkswagen Digital Cockpit Basic  
Information Displays.  
Active media.  
Driving Data.  
Vehicle status.  
Radio station selection.  
After starting the engine when the 12 V vehicle battery is severely drained or has been replaced or jump-started, system  
settings, e.g. personal convenience settings and programming, may be adjusted or deleted. Check and correct the settings  
after the 12 V vehicle battery is sufficiently recharged.  
WARNING  
If the driver is distracted, accidents and serious injuries can occur. Operating the Infotainment system can distract you  
from traffic.  
Always drive attentively and responsibly.  
Adjust settings in the Infotainment system only when the vehicle is stationary.  
Dynamic Road Sign Display  
Introduction  
The Dynamic Road Sign Display  
detects standard road signs using a  
camera in the interior rearview mirror  
base and informs the driver of  
detected speed limits and passing  
restrictions. Within the system limits,  
the system also displays an additional  
sign to indicate special restrictions. The  
system may also continue to display  
the valid speed limit on roads without  
signs.  
The traffic signs recorded by the Dynamic Road Sign Display are shown in the display of the Volkswagen Digital Cockpit.  
Depending on the Infotainment system installed in the vehicle, the road signs may also be displayed there.  
Dynamic Road Sign Display is always active when the ignition is started.  
Road sign display  
Fig. 27 In the instrument cluster display: recognized speed limits (general example).  
52  
After checking and evaluating the information from the camera, the Infotainment system, and the current vehicle data, the  
Dynamic Road Sign Display function displays up to two valid traffic signs and a generic additional sign fig. 27:  
1st position: The road sign that is currently valid is shown on the left-hand side of the display, for example a speed limit of  
20 mph (approx. 35 km/h).  
2nd position: Another road sign can be displayed in the second position, such as a passing restriction.  
Additional signs: A recognized additional sign is displayed above the applicable traffic sign. Depending on the system, a  
generic additional sign is displayed instead of the actually recognized additional sign. The applicable traffic sign in  
the display of the instrument cluster is supplemented by the generic additional sign.  
WARNING  
The Dynamic Road Sign Display is not a replacement for the driver's attention and works only within the system  
limitations. This means that the Dynamic Road Sign Display cannot detect all road signs and may not react, or may react  
with a delay, or may react in a way that is not desired. Driving recommendations and road signs displayed in the Dynamic  
Road Sign Display may differ from the actual traffic situation.  
Observe the system limitations ⇒ Limits of the Dynamic Road Sign Display .  
Always stay attentive and do not rely solely on the system. The driver is always responsible for control of the  
vehicle.  
Traffic signs on the roads and traffic regulations must always take precedence over driving recommendations and  
displays from the Dynamic Road Sign Display function.  
Always adapt your speed and driving style to the visibility, weather, road and traffic conditions.  
Limits of the Dynamic Road Sign Display  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
Error messages  
No road signs available. The system is in the initialization phase.  
Or: the vehicle has not detected any road signs.  
Error: Dynamic Road Sign Display. System malfunction. If the malfunction persists, contact a suitably qualified  
professional. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen  
Service Facility.  
Speed Alert currently not available. The speed alert from the Dynamic Road Sign Display is malfunctioning. If the  
malfunction persists, contact a suitably qualified professional. Volkswagen recommends contacting an authorized  
Volkswagen dealer or authorized Volkswagen Service Facility.  
Dynamic Road Sign Display: Clean windshield! The windshield is dirty in the area around the camera or weather  
conditions are interfering with the camera view. Clean the windshield.  
Dynamic Road Sign Display is currently limited. Data is not being transmitted by the Infotainment system. Check that  
valid map data is loaded in the Infotainment system.  
Or: the vehicle is located in an area that is not detected on the map stored in the Infotainment system.  
No data available. The Dynamic Road Sign Display function is not supported in the country where the vehicle is currently  
being operated.  
Functional limitations  
The Dynamic Road Sign Display is subject to system limitations. The following conditions may cause the Dynamic Road Sign  
53  
Display function to be limited or to not operate at all:  
High ambient temperature or long exposure to direct sunlight.  
Poor visibility, such as in snow.  
Glare, for example from oncoming traffic or the sun  
High speeds  
If the camera is obstructed or dirty  
If road signs are outside of the camera’s visual field  
If road signs are partially or completely covered, for example by trees, snow, dirt, or other vehicles.  
If road signs are not in the standard format  
If there are damaged or bent road signs  
If there are variable traffic signs on overhead signs (variable display of road signs by LED s or other lighting).  
If there is outdated map material in the Infotainment system  
If there are stickers on vehicles that indicate road signs, such speed limits on commercial vehicles  
Operating the Dynamic Road Sign Display  
Please read the introductory information and heed the Warnings and Notice ⇒  
Introduction.  
Switching on and off  
The continuous display of road signs in the instrument cluster can be switched on and off through the vehicle settings in the  
Infotainment system.  
Speed warning  
If the Dynamic Road Sign Display function detects that a valid speed limit is being exceeded, it may warn the driver audibly or  
visually with a message in the instrument cluster display.  
The speed warning can be set or completely deactivated in the vehicle settings in the Infotainment system ⇒ Vehicle settings  
menu. The setting can be set at increments of 5 km/h (3 mph) within a range of 0 km/h (mph) and 10 km/h (5 mph) above the  
maximum permissible speed.  
Trailer mode  
On vehicles with a trailer hitch installed at the factory and a trailer that is connected to the vehicle electrical system, the displa  
of road signs relevant to a trailer, such as the valid speed limit and passing restrictions for vehicles with a trailer, can be  
activated and deactivated in the vehicle settings in the Infotainment system ⇒ Vehicle settings menu.  
For trailer mode, the display of valid speed limits can be adjusted to the model of the trailer and to the legal regulations. The  
setting can be set in increments of 10 km/h (5 mph) within a range of approx. 60 km/h (40 mph) and approx. 130 km/h  
(80 mph). If a speed is set that is higher than the permitted speed for driving with a trailer in the country or state where the  
vehicle is being operated, the Dynamic Road Sign Display function will automatically display the legal speed limit, for example  
approx. 80 km/h (50 mph) in California.  
If the speed warning is deactivated for the trailer, the Dynamic Road Sign Display function will display the speed limits as it  
would when driving without a trailer.  
54  

Related Topics

Symbols in the instrument cluster
Introduction to the instrument cluster
Volkswagen Digital Cockpit Pro
Volkswagen Digital Cockpit Basic
Analog instrument cluster
Fuel gauge
Engine coolant temperature gauge
Driving data menu
Service
Time
Vehicle settings menu
Dynamic Road Sign Display

Popular Owner Manuals

Audi
BMW
Citroen
Ford
Honda
Peugeot

Latest Owner Manuals

First Generation (2017-2025) Volkswagen T-Roc SUV First Generation (2017-2025) Volkswagen T-Roc SUV
First Generation (2021-2025) Volkswagen Taigo SUV First Generation (2021-2025) Volkswagen Taigo SUV
First Generation (2022-2025) Volkswagen Taos SUV First Generation (2022-2025) Volkswagen Taos SUV
First Generation (2018-2025) Volkswagen Tayron SUV First Generation (2018-2025) Volkswagen Tayron SUV
Third Generation (2024-2025) Volkswagen Tiguan 4 Door Third Generation (2024-2025) Volkswagen Tiguan 4 Door
Second Generation (2016-2024) Volkswagen Tiguan 4 Door Second Generation (2016-2024) Volkswagen Tiguan 4 Door