Get Driver information -> Time Guide for Volkswagen Tiguan 4 Door Third Generation (2024-2025)

Checking a Service Due Date in the Analog Instrument Cluster

1. Press and hold the button in the instrument cluster until Service appears in the display.

2. Release the

button.

The current service due date is shown in the display.

Checking a Service Due Date in the Volkswagen Digital Cockpit Pro and Basic Versions

When the ignition is on, the engine is off and the vehicle is stationary, the current service due date can be checked:

1. Open the service menu ⇒ Service menu.

Resetting the service interval display

If the service interval display was not reset after the oil change service or inspection service, the display can be reset as

follows:

Vehicles with analog instrument cluster:

1. Switch the ignition off.

2. Press and hold the

button in the instrument cluster.

3. Switch the ignition back on.

4. Release the

button when one of the following messages appears in the instrument cluster display: Reset oil change

service? or Reset inspection service?.

5. Press the

button in the instrument cluster to conﬁrm.

Vehicles with a digital instrument cluster: The service interval display can only be reset through the service menu ⇒ Service

menu.

Do not reset the service interval display between service intervals or incorrect information will be displayed.

If the oil change service interval was manually reset, the service interval display then also switches to a ﬁxed service interval,

even on vehicles with the ﬂexible oil change service interval.

The service message automatically disappears after a few seconds when the engine is running or by pressing the

button on the windshield wiper lever or the

button on the multi-function steering wheel.

If the 12 V vehicle battery in a vehicle with the flexible service interval has been disconnected for an extended period, the

time for the next oil change service cannot be calculated. Therefore, the service interval displays may show incorrect

calculations. If this is the case, follow the maximum permissible maintenance intervals.

Time

Setting the time in the Infotainment system

1. Depending on the design, press the

button or function key and open the Vehicle menu.

button or function key.

Or: depending on the vehicle equipment, press the

2. Depending on how your vehicle is equipped, open the Settings menu.

3. Select the Time and date menu item to set the time.

Setting the Time in the Volkswagen Digital Cockpit Pro

1. Select the Range information proﬁle.

2. Press and hold the

button on the multi-function steering wheel until the service menu is available in the instrument

cluster display ⇒ Service menu.

3. Select Time menu.

4. Set the correct time using the

arrow buttons.

Setting the Time in the Volkswagen Digital Cockpit Basic

1. Open the service menu ⇒ Service menu.

2. Select the Time menu.

3. Set the correct time with the

button.

Setting the time in the analog instrument cluster

1. To set all clocks in the vehicle, press and hold the

button in the analog instrument cluster until Time appears in the

instrument cluster display.

2. Release the

button.

The time is displayed and the hour display is marked.

3. Press the

button as many times as required until the preferred hours are displayed.

Press and hold the

button to move through the numbers faster.

After several seconds, the system automatically switches to minute display.

4. Press the button as many times as required until the desired minutes are displayed.

Press and hold the button to move through the numbers faster.

5. Release the button to ﬁnish setting the time.

Vehicle settings menu

You can switch individual functions

and systems on and off and adjust

settings in the vehicle settings menu in

the Infotainment system.

Opening the Vehicle settings Menu

1. Switch the ignition on.

2. If necessary, switch on the Infotainment system.

3. Depending on the equipment, press the

Or: depending on the design, press the

button or function key and select the Vehicle menu.

button or function key and select the Settings menu.

Or: Tap the

function key and select the Car menu.

4. To open other menus in the Vehicle settings menu or to adjust settings to the menu items, tap the

select the relevant function keys.

function key and

5. Tap the

function key to return to the previous menu.

A check mark

indicates that the respective function is switched on.

System settings and vehicle information display

Vehicle settings (setup)

Depending on vehicle equipment: Performance monitor.

Depending on vehicle equipment: Lap timer.

Off-road display ⇒ Offroad display.

Volkswagen Digital Cockpit (Pro) ⇒ Volkswagen Digital Cockpit Pro, ⇒ Volkswagen Digital Cockpit Pro Information

Displays.

Driver information -> Time for Your Volkswagen Tiguan 4 Door Third Generation (2024-2025)

Related Topics

Driver information

Popular Owner Manuals

Latest Owner Manuals