Get Practical equipment -> Multifunctional table Guide for Volkswagen Transporter Van Seventh Generation (2021-2025)

Multifunctional table

Fig. 1 Multifunctional table, basic position.

304

Fig. 2 Multifunctional table with raised table module.

1

2

3

4

5

6

7

8

9

Handle for releasing the latch, front.

Folding compartment.

Table module.

Drink holder and stowage compartment.

Table tops, folded in.

Lift button.

Double drink holder.

Handle for releasing the latch, rear.

Small stowage compartment under the table module.

10 Lifting column.

11 Table tops, folded out.

12 1.5 l bottle holder.

13 Large stowage compartment under the table module.

The multifunctional table serves as a centre table in the second and third row of seats. You can move the

multifunctional table along the seat rails between the rows of seats.

Depending on the equipment, you can also use the multifunctional table in the basic position in the front row of seats

→ Fig. 1.

When the table module is raised, you can use the compartments in the base of the multifunctional table as stowage

9

13

compartments → Fig. 2

and

.

Basic position of the multifunctional table

The multifunctional table is in the basic position if the following conditions are fulfilled:

✓ The multifunctional table is securely locked in the seat rails.

✓ The table tops are folded in.

✓ The table module is lowered.

Raising the table module

5

1. If necessary, fold in the table tops→ Fig. 1

the table module.

. To do this, fold up the table tops vertically and lower them into

6

2. Press the lift button → Fig. 1

.

10

The lifting column raises the table module→ Fig. 2

.

Lowering the table module

1. Make sure that the stowage compartments in the base of the multifunctional table are not too full

→ Multifunctional table.

2. Press the lift button while pushing the table module down from the engaged position.

305

3. Press the table module down by hand until it rests on the base and audibly clicks into place. Make sure that no

body parts of persons or animals and no items of clothing are between the table module and the base of the

multifunctional table → Multifunctional table.

The table module is lowered.

Moving the multifunctional table

You can move the multifunctional table along the seat rails. If the multifunctional table needs to be moved to

another row of seats, you must first remove the seat that is installed in the seat rails in the corresponding row of

seats.

5

1. Fold in the table tops→ Fig. 1

.

1

8

2. Pull and hold one of the handles→ Fig. 1

or

.

3. Push or pull the multifunctional table along the seat rails in the desired direction until the desired position is

reached.

4. Release the handle.

5. Push the multifunctional table slightly forwards and backwards until the multifunctional table audibly engages

in the seat rails.

It must not be possible to move the multifunctional table without operating the handles.

If the multifunctional table does not lock into the seat rails, remove the multifunctional table and consult a

suitably qualified workshop.

Removing the multifunctional table

You can remove the multifunctional table from the vehicle if necessary or place it in another pair of seat rails. The

multifunctional table can be removed more easily when this is done by two people.

To remove the multifunctional table from the vehicle, the path to the vehicle door must be clear. To do this, you may

first have to move one or more seats or remove them from the vehicle.

1

8

1. Pull and hold one of the handles→ Fig. 1

2. Pull and hold the second handle→ Fig. 1

or

.

1

8

.

3. Lift the multifunctional table out of the seat rails by the handles.

4. Place the multifunctional table on a flat, clean surface. If necessary, use an underlay.

The multifunctional table is removed.

The handles must be pulled one after the other. If you pull both handles at the same time, the multifunctional

table cannot be lifted out of the seat rails.

Installing the multifunctional table

You can install the removed multifunctional table in a free pair of seat rails in the vehicle if required. The

multifunctional table can be fitted more easily when this is done by two people.

When the multifunctional table has been removed from the vehicle, the path from the vehicle door to the desired

position of the multifunctional table must be clear. To do this, you may first have to move one or more seats or

remove them from the vehicle.

1

8

1. Pull one of the handles→ Fig. 1

or

.

306

1

8

2. Pull second handle→ Fig. 1

or

.

The locking elements on the underside of the multifunctional table are in the installation position.

3. Place the multifunctional table with the locking elements in the recesses of the seat rails.

4. Push the multifunctional table slightly forwards and backwards until the multifunctional table audibly engages

in the seat rails.

It must not be possible to move the multifunctional table without operating the handles.

The multifunctional table is installed.

If the multifunctional table does not lock into the seat rails, remove the multifunctional table and consult a

suitably qualified workshop.

Using the multifunctional table in the first row of seats

You can use the multifunctional table in the basic position in the first row of seats. To do this, the multifunctional

table must be installed in the centre seat rails.

5

1. Fold in the table tops→ Fig. 1

2. Lower the table module.

.

3. Move the multifunctional table to the first row of seats.

The table module must not be raised in the first row of seats when the ignition is switched on. As long as the

table module is raised in the first row of seats when the ignition is switched on, there is a warning in the

instrument cluster and in the Infotainment system. Only drive when the multifunctional table is in the basic

position.

Using the multifunctional table as a table

The multifunctional table has two table tops that you can fold out and in independently of each other.

1. Move the multifunctional table to the desired row of seats.

6

2. Press the lift button → Fig. 1

.

3

The lifting column raises the table module→ Fig. 1

11

.

3. Fold out the table tops→ Fig. 2

. To do this, pull the table tops vertically upwards as far as they will go and

fold them outwards.

If the multifunctional table is installed in the outer seat rails, you can only fold out the table top facing the

vehicle interior.

CAUTION

Parts of the body can be crushed when the table module is lowered.

● When lowering the table module, only grasp the console from above.

● When lowering the table module, make sure that no parts of people's or animals' bodies are trapped between the

table module and the base of the multifunctional table.

NOTICE

The table module lowers a little into the base of the multifunctional table when it is lowered and can damage

objects inside.

● Never try to lower the table module further by force. If the table module cannot be lowered any further for no

307

apparent reason, consult a suitably qualified workshop.

● Fill the stowage compartments under the table module to the top edge at the most.

NOTICE

● The opened multifunctional table can carry a maximum of 20 kg. If this weight is exceeded, the table top or the

table module could be damaged.

● Do not raise the table module when the table tops are folded out. The table tops might be damaged.

Introduction

Only use stowage compartments to stow light or smaller objects.

WARNING

Loose objects may be flung through the vehicle interior in the event of a sudden driving or braking manoeuvre. This

can cause serious injury and can also lead to loss of control of the vehicle.

● Stow objects only in closed stowage compartments.

● Always keep stowage compartments closed while the vehicle is in motion.

WARNING

An open glove box can increase the risk of serious injury in the event of an accident or sudden braking or driving

manoeuvres.

● Always keep the stowage compartment closed while the vehicle is in motion.

WARNING

Cigarette lighters in the vehicle could be damaged or accidentally lit. This could lead to serious burns and other

injuries.

● Before adjusting the seats, always make sure that there is no cigarette lighter on or near the movable parts of the

seat.

● Before closing stowage areas or compartments always make sure that there is no lighter in the way.

● Never stow lighters in stowage areas or compartments or on other surfaces in the vehicle. High surface

temperatures, especially in summer, may cause cigarette lighters to self-ignite.

WARNING

Objects in the driver footwell can hinder pedal operation. This can lead to loss of control of the vehicle and increase

the risk of serious injury.

● Make sure that all pedals can always be operated without any hindrance.

● The floor mats must always be properly secured in the footwell.

● No additional floor mats or other floor coverings should be placed over the fitted floor mat.

● Make sure that no objects can enter the driver footwell while the vehicle is in motion.

● If there are any objects in the footwell, remove them when the vehicle is parked.

WARNING

Incorrect use of the drink holders can cause injury.

● Never place hot drinks in a drink holder. Hot drinks in a drink holder could be spilled and cause scalding in any

sudden braking manoeuvre or accident.

WARNING

Closed drink bottles can explode in the vehicle in extreme heat or crack in extremely cold temperatures.

● Never leave closed drink bottles in an extremely hot or extremely cold vehicle for extended periods.

NOTICE

● Do not stow any temperature-sensitive objects, food or medicines inside the vehicle. Hot and cold temperatures

could damage them or render them unusable.

308

● Objects stored in the vehicle that are made from transparent materials, such as transparent suction cups on the

windows, can concentrate the sun's rays and thus cause damage to the vehicle.

NOTICE

Objects protruding from the stowage areas in the sliding doors can damage the vehicle when the sliding doors are

opened.

● When opening the sliding doors, make sure that no objects protrude from the stowage areas in the sliding doors.

● Do not place any sharp-edged objects, e.g. tools, in the stowage areas in the sliding doors.

Wireless charging function

Fig. 1 Wireless charging function: shelf with lining mat for

the wireless charging function.

The wireless charging function comes with some equipment levels and is not available in all countries.

The wireless charging function enables wireless energy transmission by electromagnetic induction over a short

distance.

The maximum charging power is 5 watts.

The wireless charging pad is located in the centre console.

The Qi standard enables wireless charging of suitable Qi-enabled mobile telephones.

Place only one Qi-enabled mobile device without a protective cover with maximum dimensions(width x length) of

80 mm x 160 mm (3.15 in x 6.299 in) flat on the wireless charging pad.

Qi-capable mobile telephones with larger dimensions cannot be charged wirelessly.

Consult the operating manual for the mobile telephone to find out if it is compatible with the Qi standard. The

manufacturer of the mobile telephone can provide more information on compatibility.

Charging a mobile telephone wirelessly

A symbol on the mat indicates the centre position of the wireless charging pad→ Fig. 1.

To charge a suitable, Qi-capable mobile telephone, proceed as follows:

1. Before charging, remove any foreign objects with metallic components such as coins from the stowage

compartment and observe the operating instructions for the mobile telephone.

2. Remove any protective covers and place the Qi-enabled mobile telephone flat on the wireless charging pad

with the display facing upwards.

3. Carefully push the Qi-enabled mobile telephone backwards into the centre console as far as it will go→ Fig. 1.

After a few seconds, a message appears on the instrument cluster and the charging process starts.

The factory-fitted Infotainment system will provide information about the start of the charging operation and,

where applicable, about any foreign objects with metallic components that are detected in the stowage

compartment. Remove foreign objects immediately!

309

Practical equipment -> Multifunctional table for Your Volkswagen Transporter Van Seventh Generation (2021-2025)

Related Topics

Practical equipment

Popular Owner Manuals

Latest Owner Manuals