Get Driver assist systems -> Pull-away assist systems Guide for Volkswagen Up 4 Door First Generation (2011-2019)

WARNING

Failure to observe the warning lamps could lead to your vehicle breaking down in traffic, and

to accidents and serious injuries.

•

Never ignore any warning lamps that are lit up.

Stop the vehicle as soon as possible and when safe to do so.

NOTICE

Failure to observe the illuminated indicator lamps could lead to the vehicle being damaged.

Information on steering

First read and observe the introductoryinformation and safety warnings⇒

Introduction

The steering should be locked every time you leave the vehicle to make it more difficult for the

vehicle to be stolen.

Mechanical steering column lock

The steering column is locked if the vehicle key is removed from the ignition lock when the vehicle

is stationary.

Activating the steering lock

Deactivating the steering lock

Park the vehicle ⇒ Braking, stopping and

parking.

Insert the vehicle key into the ignition lock.

Turn the steering wheel slightly to take the load

off the steering lock mechanism.

Remove the vehicle key.

Turn the steering wheel slightly until the

steering lock clicks into place.

Hold the steering wheel in this position and turn

the ignition on.

Electromechanical steering

The power steering provided by the electromechanical steering system automatically adjusts to the

vehicle speed, steering wheel torque and steering wheel angle. The electromechanical steering

only functions when the engine is running.

You will need considerably more strength than normal to steer the vehicle if the power steering is

reduced or has failed completely.

Driver assist systems

Pull-away assist systems

Introduction

This chapter contains information on the followingsubjects:

⇒ Indicator lamps

⇒ Start/stop system

⇒ Hill Hold Assist

Additional information and warnings:

•

Volkswagen information system ⇒ Volkswagen information system

Braking, stopping and parking ⇒ Braking, stopping and parking

Battery ⇒ Vehicle battery

Wheels and tyres ⇒ Wheels and tyres

Accessories, modifications, repairs and renewal of parts ⇒ Accessories, modifications, repairs

and renewal of parts

•

Starting the engine with jump leads ⇒ Starting the engine with jump leads

WARNING

The intelligent technology of the pull-away assist systems cannot overcome the laws of

physics. Never let the extra convenience afforded by pull-away assist systems tempt you into

taking any risks when driving – this can cause accidents.

•

Unintentional vehicle movements can cause serious injury.

The pull-away assist systems cannot replace the full concentration of the driver.

Always adapt your speed and driving style to suit visibility, weather, road and traffic

conditions.

•

A pull-away assist system cannot hold the vehicle in all hill start situations or brake it

sufficiently on all slopes going downhill (e.g. if the ground is slippery or icy).

Indicator lamps

First read and observe the introductoryinformation and safety warnings⇒

Introduction

Lit up Possible cause

Solution

The start/stop system is not available.

Automatic engine stop active.

Check whether all technical requirements

have been fulfilled. If not, remedy any

shortfalls ⇒ Start/stop system.

The start/stop system is available, but an

automatic engine stop is not possible.

Start the engine again manually using the

Start/stop system cannot start the engine. vehicle key ⇒ Starting and stopping the

engine.

Fault in the alternator.

⇒ Vehicle battery

Flashes Possible cause

Solution

Start/stop system not available.

Proceed to a qualified workshop.

Several warning and indicator lamps will light up briefly as a functional check when the ignition is

switched on. They will switch off after a few seconds.

WARNING

Failure to observe the warning lamps could lead to your vehicle breaking down in traffic, and

to accidents and serious injuries.

•

Never ignore any warning lamps that are lit up.

Stop the vehicle as soon as it is possible and safe to do so.

NOTICE

Failure to observe the illuminated indicator lamps could lead to the vehicle being damaged.

Start/stop system

Fig. 103 In the upper part of the centre console: button for the start/stop system

First read and observe the introductoryinformation and safety warnings⇒

Introduction

When the start/stop system is active, the engine is switched off whenever the vehicle is stationary.

The engine then restarts automatically as soon as it is required.

The function is automatically activated every time the ignition is switched on. The instrument cluster

display shows information about the current status ⇒ Indicator lamps.

Always switch off the start/stop system manually when driving through water.

Vehicles with a manual gearbox

•

When the vehicle is stationary, disengage the gear and release the clutch pedal. The engine is

stopped.

•

Depress the clutch pedal to restart the engine.

Important preconditions for automatic engine switch-off

•

The driver is wearing their seat belt.

The driver door is closed.

The bonnet is closed.

A minimum engine temperature has been reached.

The vehicle has been moved since the engine was last switched off.

The defrost function of the air conditioning system is not switched on.

The charging state of the vehicle battery is sufficient.

The temperature of the vehicle battery is not too low or too high.

The vehicle is not on a steep incline.

Reverse gear is not engaged.

Conditions for an automatic restart

The engine can start automatically under the following conditions:

•

If the vehicle rolls on.

If the voltage of the vehicle battery falls.

Conditions that make a key start necessary

The engine has to be started manually with the vehicle key in the following conditions:

•

If the driver unfastens their seat belt.

If the driver door is opened.

If the bonnet is opened.

Switching the start/stop system on and off

•

Press the

button in the centre console ⇒ Fig. 103.

•

If start/stop system has been deactivated, the indicator lamp in the button lights up.

If the start/stop system has switched the engine off, the engine will start again as soon as the

system has been switched off manually with the

button.

WARNING

The brake servo and the electromechanical steering will not function if the engine is switched

off.

•

Never allow the vehicle to roll if the engine is switched off.

The start/stop system must be switched off if work is to be carried out in the engine

compartment.

NOTICE

If the start/stop system is used in very high outside temperatures over a long period, the

vehicle battery can be damaged.

In some cases, it will be necessary to restart the engine manually with the vehicle key. Take

note of the corresponding indicator lamp in the instrument cluster.

Hill Hold Assist

First read and observe the introductoryinformation and safety warnings⇒

Introduction

The Hill Hold Assist function actively holds the vehicle when pulling away on an incline.

The Hill Hold Assist function is automatically activated if the following

conditions are met

Points 1 to 3 must be fulfilled at the same time:

Manual gearbox

Automated manual gearbox

On an incline, the stationary vehicle must be held in position with the footbrake until the

vehicle starts moving.

The engine is running smoothly.

Fully depress the clutch pedal and move the

Position D is selected when driving forwards

gear stick to the 1st gear position if you want

up an incline or position R is selected for

to drive forwards up a hill or to the R position

driving in reverse up an incline.

if you want to reverse up a hill.

Points 1 to 3 must be fulfilled at the same time:

Manual gearbox

Automated manual gearbox

In order to start moving, remove your foot

To start moving, remove your foot from the

from the brake pedal, then release the clutch brake pedal and press the accelerator

pedal (clutch engages) and press the

accelerator simultaneously. The brake will

gradually be released as the clutch is

engaged.

immediately. The brake will gradually be

released as the vehicle pulls away.

The Hill Hold Assist function will be deactivated immediately:

•

As soon as one of the conditions indicated on ⇒ The Hill Hold Assist function is automatically

activated if the following conditions are met is not fulfilled.

•

If the engine is not running smoothly or there is an engine fault.

If the engine is switched off or has stalled.

Vehicles with automated manual gearbox: if the selector lever in is the neutral position N.

ParkPilot

Introduction

This chapter contains information on the followingsubjects:

⇒ Operating ParkPilot

⇒ Acoustic and optical ParkPilot signals at the rear of the vehicle

The ParkPilot assists the driver when manoeuvring and parking.

The ultrasound sensors in the rear bumper transmit and receive ultrasonic waves. The system uses

the time difference between the ultrasonic waves (i.e. between the transmission and reflection from

obstacles and the point of reception) to continuously calculate the distance between the bumper

and the obstacle.

Additional information and warnings:

•

Exterior views ⇒ Exterior views

Braking, stopping and parking ⇒ Braking, stopping and parking

Cleaning and caring for the vehicle exterior ⇒ Caring for and cleaning the vehicle exterior

Accessories, modifications, repairs and renewal of parts ⇒ Accessories, modifications, repairs

and renewal of parts

•

Portable navigation device (delivered by Volkswagen) ⇒ Accessories, modifications, repairs and

renewal of parts

Radio ⇒BookletRadio,

Driver assist systems -> Pull-away assist systems for Your Volkswagen Up 4 Door First Generation (2011-2019)

Related Topics

Driver assist systems

Popular Owner Manuals

Latest Owner Manuals