Get Transporting -> Roof carrier Guide for Volkswagen Up 4 Door Second Generation (2019-2023)

WARNING

Never use the bag hooks as fastening rings for straps. The bag hook could break off during a

sudden braking manoeuvre or accident.

NOTICE

The bag hooks can only carry a maximum of 1.5 kg.

Roof carrier

Introduction

This chapter contains information on the followingsubjects:

⇒ Attaching the mounts and load carrier system

⇒ Loading the load carrier system

The roof of the vehicle has been designed for optimum aerodynamic effect. It is therefore no longer

possible to attach conventional roof carrier systems to a rain channel on the roof.

As the rain channels have been integrated into the roof for better aerodynamics, only mounts or

roof carriers approved by Volkswagen can be used.

When should the roof carrier be removed?

•

When it is no longer being used.

When the vehicle is driving through a car wash.

When the vehicle height exceeds the required clearance height, e.g. in a garage.

Additional information and warnings:

•

Lights ⇒ Lights

Transporting ⇒ Transporting

Driving with respect for the environment ⇒ Driving with respect for the environment

Wheels and tyres ⇒ Wheels and tyres

Accessories, modifications, repairs and renewal of parts ⇒ Accessories, modifications, repairs

and renewal of parts

WARNING

When transporting heavy or bulky objects in the roof carrier, the vehicle's handling will change

due to a shift in the centre of gravity and an increased susceptibility to crosswinds.

•

Always secure loads properly using suitable and undamaged securing straps.

Cargo that is large, heavy, bulky, long or flat will have a negative effect on the vehicle

aerodynamics, centre of gravity and overall handling.

•

Avoid abrupt and sudden driving and braking manoeuvres.

Adapt your speed and driving style to suit visibility, weather, road and traffic conditions.

NOTICE

•

Always remove the roof carrier before driving through an automatic car wash.

•

The vehicle's height is changed by the installation of the roof carrier system and the load

secured on it. Check and compare the height of the vehicle with clearance heights, e.g. for

underpasses and garage doors.

The roof carrier system and its load must not obstruct you from opening and closing the

electric panorama sliding/tilting glass roof and tailgate. The roof aerial must also remain

unaffected.

When opening the tailgate, take care not to let it hit the roof load.

Driving with a fitted roof carrier will increase air resistance and thus increase fuel

consumption.

Attaching the mounts and load carrier system

Fig. 78 Attachment points for the mounts on 2-door vehicles (both sides)

Fig. 79 Attachment points for the mounts on 4-door vehicles (both sides)

First read and observe the introductoryinformation and safety warnings⇒

Introduction

Mounts serve as a basis for special load carrier systems. Special load carriers must then be added

to transport luggage, bicycles, skis, surfboards or boats safely. Suitable accessories are available

from your Volkswagen dealership.

Mounts and load carriers must always be attached correctly. You must observe the fitting

instructions that were delivered with the roof carrier system.

Attaching the mounts and load carrier system

2-door vehicles: the holes or markings for the front mount securing points are located on the

underside of the roof side members ⇒ Fig. 78A (left-hand magnification). The holes or markings for

the securing points are only visible when the door is open. The markings for attaching at the rear

are at the top on the side windows ⇒ Fig. 78 (right magnification).

4-door vehicles: the holes or markings for the mount securing points are located on the underside

of the roof side member and are visible only when the doors are open ⇒ Fig. 79.

The roof carrier must only be attached at the markings shown in the illustration ⇒

After fitting the mounts properly as per the instructions provided, attach the load carrier to the

mount.

WARNING

Incorrectly attaching and using the mounts and load carrier could cause the whole system to

fall off the roof. This could cause accidents and injuries.

•

Always observe the manufacturer's instructions.

Use mounts and load carriers only when they are undamaged and fitted correctly.

The roof carrier may be attached at the markings shown in the illustrations only ⇒ Fig. 78

or ⇒ Fig. 79.

•

Fit mounts and load carriers correctly.

Check the bolts and anchorage points before starting your journey and adjust as

necessary after driving a short distance. During a long trip, check all bolts and fasteners at

each stop.

•

Special fixtures for items such as bicycles, skis, surfboards, etc. should always be

properly installed.

Do not carry out any alterations or repairs to the mounts and roof carrier system.

Read and note the fitting instructions for the mounts and the load carrier system provided

and always carry the instructions in the vehicle.

Loading the load carrier system

First read and observe the introductoryinformation and safety warnings⇒

Introduction

Loads can only be attached securely when the roof carrier system is fitted correctly ⇒

Maximum permissible roof load

The maximum permitted roof load is 50 kg. The roof load limit refers to the combined weight of the

load carrier, the mounts and the load carried on the roof ⇒

Transporting -> Roof carrier for Your Volkswagen Up 4 Door Second Generation (2019-2023)

Related Topics

Transporting

Popular Owner Manuals

Latest Owner Manuals