How To Start The Engine  
					Warning: The engine can be started by any person in the  
					vehicle if the brake pedal is pressed down. Care should be  
					taken that the vehicle is not left unattended with the key  
					present and occupants such as young children inside.  
					Caution: Make sure the park brake is applied and the  
					transmission is in PARK (P).  
					This will prevent the vehicle from moving once the engine is  
					started.  
					Caution: In extreme low temperatures (-20°C and below)  
					do not run the engine above 4000 rpm, while at standstill or  
					when moving off, until the coolant temperature gauge  
					reaches normal operating temperature. If you do, there is a  
					risk of damage to the engine and transmission.  
					To start the engine, fully press the brake pedal down and press  
					START/STOP (A).  
					Once the engine begins to crank, release START/STOP.  
					Stopping The Engine  
					Press START/STOP to stop the engine.  
					Quiet Start  
					Push and hold START/STOP for 3 seconds to use the Quiet Start  
					feature. The button bezel will flash red twice to confirm. In Quiet  
					Start, the volume of the exhaust note is reduced on engine start.  
					5.4 Driving