11.32
Maintenance
How to Adjust
Should either headlamp require adjustment:
Remove the rubber access panel. Adjust the headlamp vertical aim
by turning the adjuster (C) using a Phillips screwdriver or a ¼ inch
Allen key.
Check the vertical beam aim by reversing the vehicle backwards 12
ft and repeating the check procedure. The beam height should have
reduced by 1 inch.
Replace the access panel.
Other External Lamps
High Level Stop Lamp
The high level mounted stop lamp unit consists of LEDs and is not
repairable. If a high level mounted stop lamp LED fails contact your
Aston Martin Dealer.
Front Indicator, Parking and Side Marker Lamps
If a front indicator, parking or side marker lamp fails to operate,
contact your Aston Martin Dealer. These lamps consist of LEDs and
are not repairable.
Side Indicators
The side indicators comprize of five LEDs in each front wing side
strake and are not repairable. If a side indicator LED fails, contact
your Aston Martin Dealer.
Registration Plate Lamps
To change a registration plate bulb:
Remove the trim panel from the
underside of the trunk lid.
Twist, counterclockwize, and
withdraw the bulb holder.
Remove the defective bulb and
replace with a new one.
Twist the bulb holder back into
in position. Replace the trunk
trim panel.
Rear Lamp Clusters
The rear indicators, stop and tail, reversing lamps and rear fog LEDs
are contained in a sealed lamp cluster unit, one either side of the
vehicle. The lamp cluster is not repairable, if a rear lamp fails contact
your Aston Martin Dealer.
English 
