Driving information
specific speed/distance. For the best possible
measurement readings, Audi recommends limit-
ing the ESC or turning it off. Keep in mind that
the environmental conditions and tire properties
can affect the results of the measurement.
ule (ITM). It replaces a separate transponder for
detecting toll fees. The system electronics are in-
tegrated in the rearview mirror housing.
To use the ITM in toll zones, you must register
and activate it.
Opening the acceleration measurement
Registration
►
Select in the instrument cluster: vehicle func-
►
Applies to: MMI: Select on the home screen:
tions tab > button > Acceleration measure.
VEHICLE > Settings & Service > Integrated Toll
Module.
WARNING
►
Note the Integrated Toll Module ID.
Your focus should always be on driving your
vehicle safely. As the driver, you have com-
plete responsibility for safety in traffic. Only
use the acceleration measurement function
on closed courses to reduce the risk of acci-
dents.
►
To register the ITM, go to the displayed web ad-
dress and follow the instructions.
Activation
►
To activate the ITM, press in the MMI.
Entering the number of passengers
Tips
A lower toll fee may be charged depending on the
number of passengers and the region. You must
either enter the number of passengers or deacti-
vate the ITM based on the laws applicable in the
area where you are driving.
The acceleration measurement was calibrated
using the largest possible summer tire/rim
combination available at the factory. Using a
different tire/rim combination could affect
the accuracy of the measurement.
►
To enter the number of passengers, select the
appropriate button in the MMI.
►
To deactivate the ITM, press in the MMI.
Using the acceleration measurement
Applies to: vehicles with acceleration measurement
Tips
Requirement: the acceleration measurement
must be opened.
– The driver is responsible for specifying the
correct number of passengers and activat-
ing or deactivating the ITM.
►
Bring the vehicle to a full stop.
►
Select and confirm the desired speed or dis-
– Malfunctions can occur when detecting tolls
if both the ITM and transponder are activat-
ed. Deactivate the system not being used or
remove it as necessary.
tance.
►
Wait briefly until the symbol appears in the
instrument cluster next to the time measure-
ment.
– If the rearview mirror is replaced, you must
register the new ITM and remove the old
ITM from the account.
►
To start the acceleration measurement, acceler-
ate the vehicle. The measurement ends auto-
matically once you have reached the selected
speed or distance.
– The system complies with United States FCC
regulations and ISED regulations
ðpage 310.
Integrated Toll Module
Display
Description
Applies to: vehicles with Integrated Toll Module
Applies to: vehicles with Integrated Toll Module
The selected number of passengers is displayed
in the MMI status bar ðpage 25.
Depending on the region, you can pay toll fees in
certain countries using the Integrated Toll Mod-
138
English 
