Driving information
complete responsibility for safety in traffic. To
reduce the risk of an accident, only use the lap
timer functions in such a way that you always
maintain complete control over your vehicle in
all traffic situations.
Tips
– A maximum of 99 lap times can be meas-
ured.
– If timing is paused, you can continue it later
even if you turn off the ignition.
– Saved lap times cannot be individually de-
leted from the total results.
Tips
You can retrieve information from the trip
computer while the lap timer stopwatch is
running.
– The saved lap timer values will remain after
turning off the ignition.
Lap statistics
Applies to: vehicles with lap timer
Lap times and timing
Applies to: vehicles with lap timer
Displaying lap statistics
Requirement: the lap timer must be open.
You can display the number of laps driven , the
fastest lap +, the slowest lap , and the average
time ∅ in the instrument cluster.
Timing laps
►
To start timing manually, select Start lap 1 in
the menu.
►
Select in the instrument cluster: Vehicle func-
►
To start timing automatically as soon as you be-
tions tab > button > Lap statistics.
gin to drive, select Start lap 1 by driving off or
Start by driving off in the menu.
►
Turn the thumbwheel down or up to display the
individual lap times.
►
To start timing a new lap after driving a lap, se-
►
To return to the lap timing that was started, se-
lect New lap in the menu. This starts timing
lect the button > Lap times.
the next lap at the same time.
Resetting lap statistics
After completing a lap, the difference between
the last lap and the previous best lap time will be
indicated with a or +.
Requirement: the lap statistics menu must be
displayed.
►
To reset the lap statistics, press and hold the
left thumbwheel until the message No lap
times have been recorded yet. appears.
Pausing timing and displaying a split time
►
To take a break , select Pause in the menu.
►
To resume timing, select Resume in the menu.
►
To display a split time, select Split time in the
Tips
menu. The split time appears for approxi-
mately ten seconds in the instrument cluster.
The current lap timing will continue running.
The lap statistics list the lap times for the last
30 laps. The fastest and slowest lap times out
of up to 99 measured laps are also displayed.
Canceling lap timing
Acceleration
measurement
The timing of the current lap will stop. The lap
time will be erased and will not be included in the
statistics.
1)
Introduction
Applies to: vehicles with acceleration measurement
►
Select Cancel lap in the menu.
Resetting the time
With the acceleration measurement, you can
measure the time that you need to reach a
►
Select Reset lap times in the menu.
1)
Not available in all countries
137
English 
