Get 700- Pneumatic Gearshift and Pedals -> 700 - 1.3 Brake Pedal Guide for Audi R8 2 Door Second Generation (2016-2024)

700- Pneumatic Gearshift and Pedals

700 - 1.3 Brake Pedal

The following adjustments can be made to the brake pedal:

-

X Position (longitudinal offset between brake and throttle pedals)

Y Position (distance to throttle pedal and to left foot rest)

Z Position and angle (height and angle of pedal plate)

a) X Position

In the standard position, the brake pedal plate is on the same plane as the left

footrest and compared to the throttle pedal plate 10 mm closer to the driver. If

required, the brake pedal can be moved another 10 mm closer to the driver. A

second row of holes is provided in the brake pedal plate for this purpose.

Image 29: Setting Brake Pedal Plate 20

mm in Front of Throttle Pedal Plate

Image 28: Basic Setting: Brake Pedal Plate

10 mm in Font of Throttle Pedal Plate

Version 1 2016-01-01

74 / 113

700- Pneumatic Gearshift and Pedals

Attention

The distance between the pedal plate and the driver should not be adjusted on

the brake master cylinder, otherwise the bell crank geometry changes and the

system can stick in the depressed position!

b) Y Position

To increase the distance to the left footrest or the throttle pedal plate to the

right, the brake pedal plate can be turned through 180°.

Image 30: Brake Pedal Plate Long Side Left

Image 31: Brake Pedal Plate Long Side Right

c) Z Position and Angle

The brake pedal plate can be adjusted in both height and angle for drivers with

particularly large or small feet.

Version 1 2016-01-01

75 / 113

700- Pneumatic Gearshift and Pedals

Image 32: Brake Pedal Plate Height

Adjustment

Image 33: Brake Pedal Plate Angle

Adjustment

Version 1 2016-01-01

76 / 113

700- Pneumatic Gearshift and Pedals -> 700 - 1.3 Brake Pedal for Your Audi R8 2 Door Second Generation (2016-2024)