2019-2025 Audi RS6 4 Door Further assist systems -> Traffic light information User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Further assist systems -> Traffic light information for Your Audi RS6 4 Door Fourth Generation (2019-2025)

Further assist systems  
If the message is still displayed when you switch  
the vehicle back on, drive to a qualified workshop  
soon and have the fault rectified.  
The traffic light information function tells you  
the speed at which you need to travel to reach  
the next traffic light on green 1 . It also informs  
you how long you will be waiting at the next red  
light 2 . The traffic light information is shown in  
the instrument cluster and head-up display as  
soon as traffic light data is available. If certain  
system limits are reached, the speed recommen-  
dation or the waiting time at a red traffic light  
cannot be shown and a grey traffic light symbol  
3 is shown instead. This is the case if the dis-  
tance to the traffic light is less than 30 metres,  
for example.  
Traffic light information  
Introduction  
Within the system limits, the traffic light infor-  
mation function helps to reduce stop-start traffic  
and improve the flow of traffic. For this purpose,  
you are shown the ideal speed at which to travel  
so that you reach the next set of traffic lights  
when they are green.  
System limits of the traffic light  
information function  
WARNING  
Please note the safety precautions and sys-  
tem limits of the supporting systems, sen-  
sors and cameras ðpage 130 to  
The traffic light information function is subject to  
certain inherent restrictions and may be partially  
or completely unavailable in the following situa-  
tions:  
ðpage 132.  
Never allow the displayed traffic light infor-  
mation to distract your attention from the  
road – risk of accident! Always monitor the  
distance to other vehicles and the area  
around the vehicle. It is always the driver's  
responsibility to assess the traffic situation  
and take appropriate care.  
If the current speed limit is being exceeded.  
If the vehicle is travelling below a specific  
speed.  
If the next traffic light is less than approx. 30 m  
away.  
If the waiting time at a red light is less than  
four seconds.  
Never allow the traffic light information dis-  
played to lead you to disregard traffic regu-  
lations or take risks – risk of accident! It is  
essential that you adjust your speed to suit  
the weather, road, terrain and traffic condi-  
tions.  
If no traffic light data are available.  
If the map material on the navigation system or  
the navigation data being used are out of date.  
If emergency or public transport vehicles over-  
ride the regular traffic light cycle.  
If traffic lights are being serviced.  
If the data connection has been interrupted.  
If the privacy settings in your vehicle are incom-  
patible.  
Overview of traffic light information  
displays  
If the licence for the traffic light information  
function has expired.  
Information on the traffic light information  
The traffic light information is available only in a  
small number of selected cities and not in all  
areas.  
Fig. 105 Instrument cluster: Traffic light information dis-  
play  
Some traffic lights can react to different traffic  
situations. In this case, the traffic light informa-  
tion display may change abruptly.  
173  
Further assist systems  
If the map material on the navigation system is  
out of date, the information on the display may  
be implausible or incorrect, or the data may not  
be shown at all.  
You can view the data required for registration.  
Select: > ETC > Hardware information.  
If the vehicle’s number plate is changed, the ETC  
must be re-registered.  
The actual traffic signs on your route always take  
precedence over the information on the display.  
As the driver you are always responsible for ad-  
hering to the locally applicable laws and regula-  
tions.  
Activation/deactivation  
The ETC card reader is located in the glove box.  
To activate the ETC, insert the ETC card chip-  
first into the slot in the ETC card reader. The  
symbol will appear in the status bar on the cen-  
tre display if the data have been read correctly.  
To deactivate the ETC, press the eject button on  
the ETC card reader and remove the ETC card.  
Whether or not you use the traffic light informa-  
tion, it is vital to check the road speed with the  
speedometer and to stay within the maximum  
speed limit.  
The measurement units and language settings  
shown in the display are based on the MMI sys-  
tem settings.  
The symbol will appear in the status bar on  
the centre display.  
Changing the settings for the electronic  
toll collection system  
Switching the traffic light information  
on/off  
You can switch certain functions of the ETC on/  
off.  
You can switch the traffic light information  
on/off in the Driver assist menu ðpage 134.  
Select: > ETC > Settings.  
Probe data upload  
Electronic toll collection  
system  
The function that sends vehicle and position data  
that is required for discounts to tolls can be  
switched on/off.  
Introduction  
You can use the electronic toll collection system  
(ETC) to pay for tolls due on particular routes  
with a registered ETC card. When the vehicle  
passes a toll station, the toll due is shown on the  
centre display and, depending on the settings,  
may also be spoken aloud.  
Displaying toll payment history  
You can display the most recent toll payments  
(up to 100 payments).  
Select: > ETC > Payment history.  
Setting up  
Registration  
The ETC will be registered by your qualified work-  
shop when you take receipt of the vehicle.  
Troubleshooting for the electronic toll collection system  
Troubleshooting options are given below.  
174  

Related Topics

Popular Owner Manuals