2017-2024 Audi S5 4 Door General maintenance -> Care of interior User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

General maintenance -> Care of interior for Your Audi S5 4 Door Fourth Generation (2017-2024)

document_0900452a81793dcc.book Seite 213 Mittwoch, 21. März 2007 5:42 17  
Care of vehicle and cleaning  
Plastic parts and leatherette  
213  
After washing, the wheels should only be cleaned with an "acid-  
free" cleaning agent for alloy wheels. This is available from Audi  
dealers and specialist retailers. Never leave the cleaning agent on  
the rims for any longer than specified in the instructions before  
rinsing it off. If the wheel cleaner fluid contains acid it can attack the  
surfaces of the wheel bolts.  
Plastic parts and leatherette can be cleaned with a damp cloth. If  
this is not sufficient, plastic parts and leatherette should only be  
treated with a special solvent-free plastic cleaner.  
Car polish or other abrasive agents should not be used. If the  
protective paint coating is damaged by stone chips etc., the  
damaged area should be touched up immediately.  
Textile covers and trim parts  
Textile covers and trim parts (e.g. seats, door trim) should be  
cleaned regularly with a vacuum cleaner. This will remove surface  
dirt which could otherwise be rubbed into the textile material  
during use. Do not use steam cleaners, as the steam could carry the  
dirt deeper into the textile material.  
WARNING  
Please note when cleaning the wheels that water, ice and road salt  
can impair the effectiveness of the brakes – this can cause an  
accident.  
Normal cleaning  
We recommend that you use a soft sponge or lint-free, micro-fibre  
cloth for normal cleaning. Only use brushes on floor coverings and  
mats, as other textile surfaces could become damaged.  
Care of interior  
In the case of normal surface dirt you can use a foam cleaner. Use a  
sponge to spread the foam on the textile surface and to work it into  
the material lightly. However, make sure that the textile material  
does not become soaking wet. Then dab off the foam with a dry and  
absorbent cloth (e.g. a micro-fibre cloth) and vacuum off any  
residue once the surface is completely dry.  
MMI display screen and control console  
The MMI display screen can be cleaned with a soft cloth and a  
special “LCD cleaner” (available from retailers of electrical goods).  
Moisten the cloth with a small amount of the cleaning fluid.  
Clean the MMI control console with a fine brush first to prevent any  
dirt from getting in between the control buttons and the housing.  
We then recommend wiping the MMI control console using a cloth  
moistened with washing-up liquid and water.  
Removal of stains  
To treat stains caused by spilled drinks (coffee, fruit juice or similar)  
make up a solution with a mild detergent for sensitive fabrics and  
apply it with a sponge. If the stains are difficult to remove, a  
washing paste can be applied directly onto the stain and worked  
into the fabric. The surface will then have to be wiped with clear  
water to remove any residue left by the paste. To do so, use a damp  
cloth or sponge and then dab the stain with an absorbent cloth.  
Caution  
To avoid scratching the screen, do not wipe the MMI display with a  
dry cloth.  
• To avoid any possibility of damage, do not let any liquid get  
Treat chocolate or make-up stains with a washing paste and then  
rinse off with water (using a damp sponge).  
inside the control console.  
Controls  
Safety  
Driving tips  
General maintenance  
Self-help  
Technical data  
document_0900452a81793dcc.book Seite 214 Mittwoch, 21. März 2007 5:42 17  
214  
Care of vehicle and cleaning  
A spirit-based cleaner can be used to remove grease, oil, lipstick or  
ball point pen. Then dab the dissolved grease or colour particles off  
with an absorbent cloth or similar. You may also have to treat the  
stain once more using washing paste and water.  
use. However, this means that the typical natural characteristics of  
the surface are less apparent, though this does not affect quality.  
Cleaning and care  
Because of the natural properties of the specially selected hides  
employed, the finished leather has a certain sensitivity to grease  
and dirt, etc. so a degree of care is required in everyday use and  
when looking after the leather. Dark clothing (especially if damp or  
incorrectly dyed) may stain leather upholstery. Dust and grit in the  
pores and seams can have an abrasive effect and damage the  
surface of the leather. Therefore leather should be cleaned at  
regular intervals, depending on the actual amount of use. When  
they have been in use for a certain time, your car seats will acquire  
a typical and distinctive patina. This is characteristic for real leather  
upholstery, and is a sign of genuine quality.  
If the covers or textile trim panels are badly soiled we recommend  
that you have them cleaned by a professional cleaning company.  
Note  
Please make sure you close any velcro fasteners on your clothing, as  
these could otherwise damage the upholstery.  
Applies to vehicles: with leather upholstery  
Natural leather  
To maintain the value of natural leather you should note the  
following points:  
Audi does everything possible to preserve the special  
qualities of leather as a natural product.  
General notes  
Caution  
We have a wide selection of leathers. The main type used is nappa  
in various forms, that is leather with a smooth surface in a selection  
of colours.  
• Avoid exposing leather to direct sunlight for long periods, other-  
wise it may tend to lose some of its colour. If the car is left for a  
prolonged period in the bright sun, it is best to cover the leather.  
The amount of dye used determines the appearance and properties  
of leather. If the leather is left in a more natural state, it retains its  
typical natural appearance and is pleasant and comfortable for the  
seat occupants. Fine veins, healed scars, insect bites, wrinkles and  
a subtle variation in shading remain visible; these are the character-  
istic features of genuine natural leather.  
• Sharp-edged objects on clothing, such as belts, zip fasteners,  
rivets or similar, can also leave permanent scratches and rough  
marks on the surface of the leather.  
Note  
• Use a suitable impregnating cream with ultra-violet protection at  
regular intervals and after cleaning. This cream will nourish and  
moisturise the leather, keep it supple and able to breathe. In addi-  
tion, it will also help to protect the surface of the leather.  
Natural napped leather does not have a protective surface coating  
of dye. It is therefore somewhat more prone to damage. You should  
bear this in mind if children or pets often travel in the car, or if there  
are other factors that could lead to damage.  
• Clean the leather every 2 to 3 months and remove fresh dirt as  
Types of leather with a coloured surface coating are likely to be  
more resistant to damage. This has a great advantage for day-to-day  
necessary.  
document_0900452a81793dcc.book Seite 215 Mittwoch, 21. März 2007 5:42 17  
Care of vehicle and cleaning  
215  
• Remove stains from fresh ball-pen and other inks, lipstick, shoe  
– Treat fat-based, dried-in stains with grease-dissolving  
cream and similar stains as soon as possible.  
spray.  
• Preserve the colour of the leather. A special coloured cream will  
renew the colour of the leather when required and will eliminate  
differences in colour.  
– Treat less common stains such as ball-pen and other  
inks, felt-tip pens, nail polish, dispersion paint, shoe  
cream etc. with a special leather stain remover.  
Applies to vehicles: with leather upholstery  
Leather care products  
Cleaning and care of leather upholstery  
– The leather should be treated regularly (about twice a  
year) with a special leather-care product.  
Natural leather requires an extra degree of attention and  
care.  
– Apply the cream very sparingly.  
Normal cleaning  
– Then wipe off with a soft, dry cloth.  
– Moisten a cotton or woollen cloth with water and wipe  
over the leather surfaces.  
Should you have any questions regarding the care and cleaning of  
the leather upholstery in your vehicle, we recommend that you  
contact your Audi dealer. The staff there will gladly provide you with  
further information on cleaning and care of your upholstery and on  
our complete range of leather care products:  
More stubborn dirt  
– More stubborn dirt can be removed using a mild soap  
solution (pure liquid soap: two tablespoons dissolved in  
one litre of water).  
• Cleaning and care set  
• Coloured leather-care cream  
– It is very important not to let the water soak through the  
leather or penetrate into the seams.  
• Stain remover for ball-pen inks, shoe cream etc.  
• Grease dissolving spray  
– Then wipe off with a soft, dry cloth.  
• New products and further developments  
Removal of stains  
Caution  
– Remove fresh water-based stains such as coffee, tea,  
juices, blood etc. with an absorbent cloth or kitchen roll,  
dried-on stains with the cleaning agent from the care set.  
On no account use solvents (such as petrol, turpentine), wax polish,  
shoe cream or similar materials.  
– Remove fresh fat-based stains on the surface such as  
butter, mayonnaise, chocolate, etc. with an absorbent  
cloth or kitchen roll or with the cleaning agent from the  
care set.  
Controls  
Safety  
Driving tips  
General maintenance  
Self-help  
Technical data  
document_0900452a81793dcc.book Seite 216 Mittwoch, 21. März 2007 5:42 17  
216  
Care of vehicle and cleaning  
Applies to vehicles: with Alcantara seat covers  
Seat belts  
Cleaning Alcantara  
Seat belts should be looked after properly to ensure that  
they give the full protection.  
Removing dust and dirt  
– Keep the seat belts clean.  
– Moisten a cloth just a little and wipe down the seat  
covers.  
– For cleaning, use a mild soap solution.  
– Check the condition of the seat belts at regular intervals.  
Removing stains  
– Moisten a cloth with lukewarm water or diluted methyl-  
ated spirits.  
Very dirty belts may not retract properly.  
Make sure that the inertia reel seat belts are completely dry before  
allowing them to retract.  
– Dab at the stain. Start at the outside and work inwards.  
– Dry the area you have cleaned with a soft cloth.  
Caution  
Do not use leather cleaning products on Alcantara seat covers.  
You may use a suitable shampoo on dust and dirt.  
• Do not remove the seat belts from the vehicle to clean them.  
• Do not use chemical cleaning agents on the seat belts, as this  
can damage the webbing. Ensure that the belts do not come into  
contact with corrosive fluids.  
Dust and grit in the pores and seams can have an abrasive effect  
and damage the surface of the leather. If the car is left standing in  
the sun for long periods, the leather should be protected against  
direct sunlight to prevent it from fading. However, slight colour vari-  
ations will arise in normal use.  
• If you find any damage to the belt webbing, belt fittings, the belt  
retractor or the buckle, the belt in question must be replaced by a  
qualified workshop.  
Caution  
• Do not use solvents, wax polish, shoe cream, stain removers,  
leather cleaning products or any similar products on Alcantara.  
• To avoid damage, stubborn stains should be removed by a qual-  
ified workshop.  
• On no account use brushes, hard sponges or similar utensils.  

Related Topics

Popular Owner Manuals