2004-2010 BMW M5 4 Door Mobility -> Maintenance User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Mobility -> Maintenance for Your BMW M5 4 Door Fourth Generation (2004-2010)

Maintenance  
>
>
Vehicle check  
BMW maintenance system  
Legally mandated inspections depending  
on local regulations  
Service data in remote control  
Your vehicle stores the information required  
maintenance continuously in the remote con-  
trol during driving. After accessing the data  
stored in the remote control, your BMW Service  
Advisor can suggest precisely the right array of  
service procedures for your own individual vehi-  
cle. You should therefore hand over the remote  
control you last used to drive to the BMW Ser-  
vice Advisor when you take your vehicle in for  
service.  
The BMW maintenance system supports the  
preservation of the traffic and operating safety  
of your BMW. The service schedule also  
includes operations related to the vehicle's  
comfort and convenience features, such as  
replacement of the filters for the inside air.  
The ultimate objective is to ensure economical  
maintenance by providing the ideal service for  
your vehicle.  
Make sure the date is always set cor-  
rectly, refer to page 71, as otherwise the  
effectiveness of CBS Condition Based Service  
is not ensured.<  
Should the day come when you decide to sell  
your BMW, a complete dealer service history  
will prove to be an asset of inestimable value.  
Service and Warranty Information  
Booklet for US models and Warranty  
and Service Guide Booklet for  
Canadian models  
CBS Condition Based Service  
Please consult your Service and Warranty Infor-  
mation Booklet for US models and Warranty  
and Service Guide Booklet for Canadian models  
for additional information on service require-  
ments.  
Sensors and special algorithms take the differ-  
ent driving conditions of your BMW into  
account. Condition Based Service uses this to  
determine the current and future service  
requirements. By letting you define a service  
and maintenance regimen that reflects your  
own individual requirements, the system builds  
the basis for trouble-free driving.  
BMW recommends that you have service  
and repair operations performed at your  
BMW center.  
Take the time to ensure that these service pro-  
cedures are confirmed by entries in your vehi-  
cle's Service and Warranty Information Booklet  
for US models and Warranty and Service Guide  
Booklet for Canadian models. These entries  
verify that your vehicle has received the speci-  
fied regular maintenance.<  
You can set the Control Display to show  
remaining distances and times of selected  
maintenance intervals and legally mandated  
deadlines, refer to page 66:  
>
>
>
>
>
Engine oil  
Brake pads, front and rear separately  
Microfilter/activated-charcoal filter  
Brake fluid  
Spark plugs  
186  
Event Data Recorders  
Socket for OBD Onboard  
Diagnostics interface  
Your vehicle may be equipped with one or sev-  
eral measuring and diagnosis modules, or with  
a device for recording or transmitting certain  
vehicle data or information. If you have also  
signed a contract of participation for  
BMW Assist, certain vehicle data can be trans-  
mitted or recorded to enable corresponding  
services.  
Care  
Components which are decisive for the  
exhaust-gas composition can be checked via  
the OBD socket with a device.  
Important information on the care and mainte-  
nance of your BMW is contained in the Caring  
for your vehicle brochure.  
This socket is located to the left on the driver's  
side, on the underside of the instrument panel  
under a cover.  
Exhaust-gas values  
The warning lamp lights up. The  
exhaust-gas values worsen. Have the  
vehicle checked as soon as possible.  
Display of the previously described  
malfunction in Canadian models.  
The lamp flashes under certain conditions. This  
is a sign of excessive misfiring of the engine. In  
this case you should reduce speed and drive to  
the nearest BMW center as soon as possible.  
Heavy engine misfiring led to serious damage  
to the emission-relevant components, espe-  
cially the catalytic converter, within a short time.  
If the fuel filler cap is not properly tight-  
ened, the OBD system can close when  
fuel vapor escapes. Then a display light up. If  
the cap is then tightened, the display will go out  
within a few days.<  
187  

Related Topics

Popular Owner Manuals